FujiFilm X-T3 Manual de usuario

Owner’s Manual

BL00004970-20Z EN

EN_2

Introduction

Thank you for your purchase of this product. Be sure that

you have read this manual and understood its contents be-

fore using the camera. Keep the manual where it will be

read by all who use the product.

For the Latest Information

The latest versions of the manuals are available from:

http://fujifilm-dsc.com/en/manual/

The site can be accessed not only from your

computer but also from smartphones and

tablets.

For information on rmware updates, visit:

http://www.fujifilm.com/support/digital_cameras/software/

EN_3

About This Manual

This manual contains instructions for your FUJIFILM X-T3

digital camera. Be sure you have read and understood its

contents before proceeding.

Symbols and Conventions

The following symbols are used in this manual:

Information that should be read to prevent damage to the

product.

Additional information that may be helpful when using the

product.

PPages on which related information may be found.

Menus and other text in the displays are shown in bold. Illustrations

are for explanatory purposes only; drawings may be simplied,

while photographs are not necessarily taken with the model of

camera described in this manual.

Terminology

The optional SD, SDHC, and SDXC memory cards the camera uses

to store pictures are referred to as“memory cards”. The electronic

viewnder may be referred to as the “EVF” and the LCD monitor

as the “LCD”.

EN_4

Charging the Battery

The battery is not charged at shipment. Before use, charge

the battery in the supplied battery charger.

An NP-W126S rechargeable battery is supplied with the camera.

Charging takes about 150 minutes.

1 Place the battery in the charger.

Place the battery in the supplied bat-

tery charger as shown.

CHARGE

2 Plug the charger in.

Plug the charger into an indoor pow-

er outlet. The charging indicator will

light.

3 Charge the battery.

Remove the battery when charging is complete.

EN_5

Charging the Battery

The Charging Indicator

The charging indicator shows battery charge

status as follows:

Charging indicator

Battery status

Action

Oﬀ Battery not inserted. Insert the battery.

Battery fully charged. Remove the battery.

On Battery charging. —

Blinks Battery fault. Unplug the charger and

remove the battery.

The supplied AC cord is for use exclusively with the supplied battery

charger. Do not use the supplied charger with other cords or the sup-

plied cord with other devices.

Do not ax labels or other objects to the battery. Failure to observe

this precaution could make it impossible to remove the battery from

the camera.

Do not short the battery terminals. The battery could overheat.

Read the cautions in “The Battery and Power Supply”.

Use only battery chargers designated for use with the battery. Failure

to observe this precaution could result in product malfunction.

Do not remove the labels from the battery or attempt to split or peel

the outer casing.

The battery gradually loses its charge when not in use. Charge the

battery one or two days before use. If the battery fails to hold a charge,

it has reached the end of its charging life and must be replaced.

Unplug the charger when it is not in use.

Remove dirt from the battery terminals with a clean, dry cloth. Failure

to observe this precaution could prevent the battery from charging.

Note that charging times increase at low or high temperatures.

EN_6

Charging the Battery

Charging via Computer

The battery also charges if the camera is connected to a computer. Turn the

camera o, insert the battery, and connect a USB cable as shown, making

sure the connectors are fully inserted.

Battery status is shown by the indicator lamp.

Indicator lamp

Battery status

On Battery charging

Oﬀ Charging complete

Blinks Battery fault

Connect the camera directly to the computer; do not use a USB hub or

keyboard. Charging stops if the computer enters sleep mode; to resume

charging, activate the computer and disconnect and reconnect the USB

cable. Charging may not be supported depending on the model of com-

puter, computer settings, and the computer’s current state.

USB connector(Type-C)

EN_7

Inserting the Battery

After charging the battery, insert the battery in the camera

as described below.

1 Open the battery-chamber cover.

Slide the battery-chamber latch as

shown and open the battery-cham-

ber cover.

Do not open the battery-chamber

cover when the camera is on. Fail-

ure to observe this precaution could

damage image les or memory cards.

Do not use excessive force when han-

dling the battery-chamber cover.

2 Insert the battery.

Using the battery to keep the battery

latch pressed to one side, insert the

battery contacts rst in the direction

shown by the arrow. Conrm that

the battery is securely latched.

Insert the battery in the orientation

shown. Do not use force or attempt

to insert the battery upside down or

backwards. The battery will slide in

easily in the correct orientation.

EN_8

Inserting the Battery

3 Close the battery-chamber cover.

Close and latch the cover.

If the cover does not close, check that

the battery is in the correct orienta-

tion. Do not attempt to force the cov-

er shut.

Removing the Battery

Before removing the battery, turn the camera o and open the battery-cham-

ber cover.

To remove the battery, press the battery latch to

the side, and slide the battery out of the camera

as shown.

The battery may become hot when used in high-temperature environ-

ments. Observe caution when removing the battery.

EN9

Inserting Memory Cards

Pictures are stored on memory cards (sold separately).

The camera can be used with two cards, one in each of its two slots.

1 Open the memory card slot cover.

Unlatch and open the cover.

Do not open the memory card-slot cover when the camera is on.

Failure to observe this precaution could damage image les or

memory cards.

2 Insert the memory card.

Holding the card in the orientation

shown, slide it in until it clicks into

place at the back of the slot. Close

and latch the memory card slot cover.

Be sure card is in the correct orientation; do not insert at an angle

or use force.

3 Format the memory card.

Format memory cards before rst use, and be sure to reformat all

memory cards after using them in a computer or other device.

EN10

Removing Memory Cards

Before removing memory cards, turn the camera o and open the memory

card slot cover.

Press and release the card to eject it part way (to

prevent the card falling from the slot, press the

center of the card and release it slowly, without

removing your nger from the card). The card

can then be removed by hand.

Using Two Cards

The camera can be used with two cards, one in each of its two

slots. At default settings, photos are saved to the card in the sec-

ond slot only when the card in the rst slot is full. This can be

changed using DSAVE DATA SET-UP> CARD SLOT SETTING

(STILL IMAGE).

Option

Description

Display

SEQUENTIAL

(default)

The card in the second slot is used only when the card in

the ﬁrst slot is full. If the second slot is selected for DSAVE

DATA SET-UP> SELECT SLOT(xSEQUENTIAL), re-

cording will start on the card in the second slot and switch

to the ﬁrst slot when the card in the second slot is full.

BACKUP Each picture is recorded twice, once to each card.

RAW / JPEG

As for SEQUENTIAL, except that the RAW copy of pictures

taken with FINE+RAW or NORMAL+RAW selected for

IMAGE QUALITY SETTING> IMAGE QUALITY will

be saved to the card in the ﬁrst slot and the JPEG copy to

the card in the second slot.

The card used to store movies can be selected using DSAVE

DATA SET-UP> SELECT SLOT(FSEQUENTIAL).

Otros manuales para X-T3

Tabla de contenidos

Otros manuales de Cámara digital de FujiFilm

FujiFilm

FujiFilm X-A1 Manual del propietario

FujiFilm

FujiFilm FinePix S5100 Manual de usuario

FujiFilm

FujiFilm FinePix Z1 Manual de usuario

FujiFilm

FujiFilm FinePix REAL 3D W3 Manual de usuario

FujiFilm

FujiFilm FinePix AX300 Manual de usuario

FujiFilm

FujiFilm X-T200 Manual de usuario

FujiFilm

FujiFilm FUJICA GSB45 Manual de usuario

FujiFilm

FujiFilm FinePix 50i Manual de usuario

FujiFilm

FujiFilm FinePix BL00494-200(1) Manual de usuario

FujiFilm

FujiFilm X-PRO2 Manual del propietario

FujiFilm

FujiFilm FinePix S1 Pro Manual de usuario

FujiFilm

FujiFilm FinePix E550 Manual de usuario

FujiFilm

FujiFilm FinePix F410 Manual de usuario

FujiFilm

FujiFilm FINEPIX 2800 ZOOM Manual de usuario

FujiFilm

FujiFilm FINEPIX JZ700 Series Manual de usuario

FujiFilm

FujiFilm FinePix F700 Manual de usuario

FujiFilm

FujiFilm FinePix F650 Manual de usuario

FujiFilm

FujiFilm FinePix F100fd Manual de usuario

FujiFilm

FujiFilm FINEPIX SL240 SERIES Manual de usuario

FujiFilm

FujiFilm X-T3 Manual del propietario

FujiFilm

FujiFilm FinePix BL00710-201(1) Manual de usuario

FujiFilm

FujiFilm FinePix F610 Manual del propietario

FujiFilm

FujiFilm FINEPIX S2900 Series Manual de usuario

FujiFilm

FujiFilm X-T30II Manual de usuario

Manuales populares de Cámara digital de otras marcas

Mercury

Mercury 350K Manual de usuario

Pentax

Pentax Optio LS 465 Manual de usuario

Sanyo

Sanyo VPC-S1085 Manual de usuario

GE SMART A1255 Manual de usuario

Point Grey

Point Grey Gazelle Manual de usuario

Nikon

Nikon COOLPIX A Manual de usuario

Pentax

Pentax P-5 Manual de usuario

BlazeVideo

BlazeVideo A280 Manual de usuario

Sony

Sony MCA-20 Manual de usuario

Sony

Sony Alpha DSLR-A290 Manual de usuario

ATIK Cameras

ATIK Cameras One Manual de usuario

CohuHD Costar

CohuHD Costar 3930 Series Manual de usuario

Leica

Leica M10-R Manual de usuario

Lorex

Lorex LNZ81P25 Series Manual de usuario

GE J1470S Manual de usuario

Sony

Sony A6700 Guía del usuario

Canon

Canon EOS ELAN7 Manual de usuario

Nikon

Nikon Coolpix 100 Manual de usuario