Friedrich Chill Premier Series Guía

1 PB

Service/ Parts Manual

RoomAir Conditioners

93011400_00

Fixed chassis, cool only

CCF05A10A, CCF06A10A, CCF08A10A, CCF10A10A

CCF12A10A

Slide out chassis, cool only

CCW06B10A, CCW08B10A, CCW10B10A, CCW12B10A

CCW15B10A, CCW18B30A, CCW24B30A

Chill Premiere Series Models

Unifit Series Models

Cool Only

UCT08A10A, UCT10A10A, UCT10A30A, UCT12A10A,

UCT12A30A, UCT14A30A

Cool with Electric Heat

UET08A11A, UET10A33A, UET12A33A, UET14A33A

2 PB

Table of Contents

INTRODUCTION 3

IMPORTANT SAFETY INFORMATION 3

PERSONAL INJURY OR DEATH HAZARDS 4

SPECIFICATIONS 7

Electrical Data 9

Product Dimensions 11

OPERATION 12

Remote Control 12

Control Panel 13

Sequence of Operation 15

R-410A SEALED SYSTEM REPAIR 22

Refrigerant Charging 23

Undercharged Refrigerant Systems 24

Overcharged Refrigerant Systems 25

Restricted Refrigerant System 26

Sealed System Method of Charging/ Repairs 27

COMPONENT TESTING 28

Hermetic Components Check 28

Reversing valve description and operation 29

Testing The Reversing Valve Solenoid Coil 30

Checking The Reversing Valve 31

Replace The Reversing Valve 32

Touch Test Chart : To Service Reversing Valves 33

Compressor Checks 34

Compressor Replacement 36

Compressor Replacement -Special Procedure in Case of Compressor Burnout 37

Fan Motor 38

Capacitors 38

TROUBLESHOOTING 39

Product Does Not Operate At All 40

Indoor Fan Does Not Operate At All 41

Compressor Or Outdoor Fan Does Not Operat At All 42

Display E1 or E2 43

WIRING DIAGRAMS 44

Chill Premier CCF 44

Chill Premier CCW 45

Chill Premier CCW 46

Uniﬁt 48

PARTS CATALOG 50

Chill Premier Models: CCW06B10A CCW08B10A CCW10B10A CCW12B10A 50

Chill Premier Models: CCW15B10A CCW18B30A 52

Chill Premier Models: CCW24B30A 54

Chill Premier Models: CCF05A10A CCF06A10A CCF08A10A 56

Chill Premier Models: CCF10A10A CCF12A10A 59

Uniﬁt Models: UCT08A10A UCT10A10A UCT12A10A UCT10A30A 61

Uniﬁt Models: UCT12A30, UCT14A30A 64

Uniﬁt Models: UET08A11A UET10A33A UET12A33A 66

Uniﬁt Models: UET14A33A 69

AVAILABLE ACCESSORIES 71

3 PB

Your safety and the safety of others is very

important.

We have provided many important safety messages in this manual and on your appliance. Always

read and obey all safety messages.

This is a safety Alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol with the word

“WARNING”

or “CAUTION”. These words mean:

Indicates a hazard which, if not avoided, can result in severe personal

injury or death and damage to product or other property.

Indicates a hazard which, if not avoided, can result in personal injury

and damage to product or other property.

All safety messages will tell you what the potential hazard is, tell

you how to reduce the chance of injury, and tell you what will happen

if the instructions are not followed.

Indicates property damage can occur if instructions are not followed.

WARNING

Refrigeration system

under high pressure

Do not puncture, heat, expose to ame or

incinerate.

Only certied refrigeration technicians

should service this equipment.

R410A systems operate at higher pressures

than R22 equipment. Appropriate safe

service and handling practices must be used.

Only use gauge sets designed for use with

R410A.

Do not use standard R22 gauge sets.

NOTICE

CAUTION

WARNING

The information in this manual is intended for use by a qualied technician who is familiar with the safety procedures

required for installation and repair, and who is equipped with the proper tools and test instruments required to

service this product.

Installation or repairs made by unqualied persons can result in subjecting the unqualied person making such

repairs as well as the persons being served by the equipment to hazards resulting in injury or electrical shock

which can be serious or even fatal.

Safety warnings have been placed throughout this manual to alert you to potential hazards that may be encountered.

If you install or perform service on equipment, it is your responsibility to read and obey these warnings to guard

against any bodily injury or property damage which may result to you or others.

IMPORTANT SAFETY INFORMATION

INTRODUCTION

4 PB

SAFETY

FIRST

WARNING AVERTISSEMENT ADVERTENCIA

Do not remove, disable

or bypass this unit’s

safety devices. Doing so

may cause re, Doing so

may cause re, injuries,

or death.

Ne pas supprime, désactiver

ou contourner cette l´unité

des dispositifs de sécurité,

faire vous risqueriez de

provoquer le feu, les

blessures ou la mort.

No eliminar, desactivar o

pasar por alto los

dispositivos de seguridad de

la unidad. Si lo hace podría

producirse fuego, lesiones

o muerte.

ELECTRICAL HAZARDS:

• Unplug and/or disconnect all electrical power to the unit before performing inspections, maintenance, or service.

• Make sure to follow proper lockout/tag out procedures.

• Always work in the company of a qualied assistant if possible.

• Capacitors, even when disconnected from the electrical power source, retain an electrical charge potential

capable of causing electric shock or electrocution.

• Handle, discharge, and test capacitors according to safe, established, standards, and approved procedures.

• Extreme care, proper judgment, and safety procedures must be exercised if it becomes necessary to test or

troubleshoot equipment with the power on to the unit.

• Do not spray water on the air conditioning unit while the power is on.

• Electrical component malfunction caused by water could result in electric shock or other electrically unsafe

conditions when the power is restored and the unit is turned on, even after the exterior is dry.

• Use air conditioner on a single dedicated circuit within the specied amperage rating.

• Use on a properly grounded outlet only.

• Do not cut or modify the power supply cord or remove the ground prong of the plug.

• Never operate the unit on an extension cord.

• Follow all safety precautions and use proper and adequate protective safety aids such as: gloves, goggles,

clothing, properly insulated tools, and testing equipment etc.

• Failure to follow proper safety procedures and/or these warnings can result in serious injury or death.

INTRODUCTION

PERSONAL INJURY OR DEATH HAZARDS

5 PB

• REFRIGERATION SYSTEM REPAIR HAZARDS:

• Use approved standard refrigerant recovering procedures and equipment to relieve high pressure before

opening system for repair.

• Do not allow liquid refrigerant to contact skin. Direct contact with liquid refrigerant can result in minor to

moderate injury.

• Be extremely careful when using an oxy-acetylene torch. Direct contact with the torch’s ame or hot surfaces

can cause serious burns.

• Make certain to protect personal and surrounding property with re proof materials and have a re extinguisher

at hand while using a torch.

• Provide adequate ventilation to vent off toxic fumes, and work with a qualied assistant whenever possible.

• Always use a pressure regulator when using dry nitrogen to test the sealed refrigeration system for leaks,

ushing etc.

• MECHANICAL HAZARDS:

• Extreme care, proper judgment and all safety procedures must be followed when testing, troubleshooting,

handling, or working around unit with moving and/or rotating parts.

• Be careful when, handling and working around exposed edges and corners of the sleeve, chassis, and other unit

components especially the sharp ns of the indoor and outdoor coils.

• Use proper and adequate protective aids such as: gloves, clothing, safety glasses etc.

• Failure to follow proper safety procedures and/or these warnings can result in serious injury or death.

• PROPERTY DAMAGE HAZARDS

• FIRE DAMAGE HAZARDS:

• Read the Installation/Operation Manual for the air conditioning unit prior to operating.

• Use air conditioner on a single dedicated circuit within the specied amperage rating.

• Connect to a properly grounded outlet only.

• Do not remove ground prong of plug.

• Do not cut or modify the power supply cord.

• Do not use extension cords with the unit.

• Be extremely careful when using acetylene torch and protect surrounding property.

• Failure to follow these instructions can result in re and minor to serious property damage.

• WATER DAMAGE HAZARDS:

• Improper installation, maintenance or servicing of the air conditioner unit can result in water damage to personal

items or property.

• Insure that the unit has a sufcient pitch to the outside to allow water to drain from the unit.

• Do not drill holes in the bottom of the drain pan or the underside of the unit.

• Failure to follow these instructions can result in damage to the unit and/or minor to serious property damage.

INTRODUCTION

PERSONAL INJURY OR DEATH HAZARDS

6 PB

INTRODUCTION

This service manual is designed to be used in conjunction with the installation and operation manuals provided

with each air conditioning system.

This service manual was written to assist the professional service technician to quickly and accurately diagnose

and repair malfunctions.

Installation procedures are not given in this manual. They are given in the Installation/Operation manual which

can be aquired on the Friedrich website.

IMPORTANT: It will be necessary for you to accurately identify the unit you are servicing, so you can be certain of

a proper diagnosis and repair.

7 PB

SPECIFICATIONS

Figure 201 (Refrigeration Systems Performance Data)

Model Cooling

Btu

Heating

Btu

Volts

Rated

Cooling

Amps

Cooling

Watts

Heating

Amps

Heating

Watts

EER CEER Moisture

Removal-

Pints/HR

Refrigerant Refrigerant

Charge

CFM Sleeve Weight

Net./

Ship lbs.

FIXED CHASSIS, COOL ONLY (WINDOW INSTALLATION ONLY)

CCF05A10A 5200 —115 4.3 459 — — 12.1 12.1 1.0 R410A 12.35 141 44/51

CCF06A10A 6000 —115 4.3 492 — — 12.1 12.1 0.9 R410A 13.76 141 44/51

CCF08A10A 8000 —115 5.8 661 — — 12.1 12.0 1.0 R410A 14.46 206 51/57

CCF10A10A 10000 —115 7.3 826 — — 12.1 12.0 1.2 R410A 19.4 282 64/73

CCF12A10A 12000 —115 8.6 992 — — 12.1 12.0 1.5 R410A 22.93 270 73/82

CHILL PREMIER SLIDE OUT CHASSIS, COOL ONLY

CCW06B10A 6000 —115 4.3 492 — — 12.2 12.1 0.9 R410A 13.76 200 44/51

CCW08B10A 8000 —115 5.8 661 — — 12.1 12.0 1.0 R410A 14.46 250 44/61

CCW10B10A 10000 —115 7.3 826 — — 12.1 12.0 1.2 R410A 19.4 300 51/68

CCW12B10A 12000 —115 8.6 992 — — 12.1 12.0 1.5 R410A 22.93 330 64/86

CCW15B10A 15000 —115 11.0 1270 — — 11.9 11.8 2.0 R410A 28.22 400 73/93

CCW18B30A 18000 —230 7.1 1525 — — 11.9 11.8 2.7 R410A 29.98 520 106/136

CCW24B30A 24000 —230 10.2 2308 — — 10.4 10.3 2.7 R410A 37.03 590 117/144

UNI-FIT® Cool Only

UCT08A10A 8000 —115 6.9 755 — — 10.7 10.6 0.8 R410A 14.46 265 64 64/78

UCT10A10A 10000 —115 8.3 940 — — 10.7 10.6 1.25 R410A 19.05 247 74 74/86

UCT10A30A 10000 —230 4.5 940 — — 10.7 10.6 1.25 R410A 19.75 265 74 74/86

UCT12A10A 12000 —115 10.1 1130 — — 10.6 10.5 1.7 R410A 22.22 276 75 75/88

UCT12A30A 12000 —230 5.4 1130 — — 10.6 10.5 1.7 R410A 22.22 265 75 75/88

UCT14A30A 14000 —230 7.2 1490 — — 9.4 9.3 2.15 R410A 22.22 265 76 76/89

UNI-FIT® Cool with Electric Heat

UET08A11A 8000 4200 115 7.2 810 12.5 1320 9.7 9.6 0.75 R410A 13.76 265 66 66/79

UET10A33A 10000 10600 230 4.9 1030 15 3500 9.7 9.6 1.2 R410A 17.99 276 75 75/87

UET12A33A 12000 10600 230 5.9 1230 15 3500 9.7 9.6 1.65 R410A 20.1 276 76 76/89

UET14A33A 14000 10600 230 7.2 1490 15 3500 9.4 9.3 2.15 R410A 22.22 265 77 77/90

8 PB

SPECIFICATIONS

Installation Clearances

Improper installation of the Air Condtioner can cause poor performance and premature wear of the unit.

Ensure that the unit is installed with proper clearances as described below.

Ensure no obstructions. or enclosures are within clearances limits to allow for proper airow.

Clearances

Rear of Unit - Three (3) feet

Figure 203 Unit ( Sleeve Dimensions)

Model

Height

Inches Width

Inch-

Depth

Inches

Minimum

Extension

Into Room

Inches

Minimum

Extension

Outside

Inches

Window

Width

Inches

Minimum* Maximum

CCF05A10A, CCF06A10A, 13

3/8

5/8

15 5/8

— —

26 36

CCF08A10A 13

3/8

5/8

17 5/8

— —

26 36

CCF10A10A, CCF12A10A 15

1/8

7/8

21 3/4

— —

26 36

CCW06B10A, CCW08B10A,

CCW10B10A, CCW12B10A

14 5/819

3/4

23 3/4

— —

26 36

CCW15B10A, CCW18B30A

18 23

7/8

25 3/8

— —

26 36

CCW24B30A

18 5/827 26 5/8

— —

26 36

Figure 202 (Chill Premier Installation)

Sleeve

Dimen-

sions

Friedrich USC

Sleeve Amana

Carrier

(51S

Series)

Fedders/

Emerson/

Friedrich

WSE

Emerson/

Fedders GE/

Hotpoint

Whirlpool

White-

Westinghouse/

Frigidaire/

Carrier (52F

Series)

Height 15 1/2”15 5/8”16 7/8”16 3/4”15 3/4”15 5/8”16 1/2”15 1/4”

Width

25 7/8”26” 25 3/4”27” 26 3/4”26” 25 7/8”25 1/2”

Depth

16 3/4”16 7/8”18 5/8”16 3/4” or

19 3/4”

15” 16 7/8”17 1/8” or

23”

16”,

17 1/2”

or 22”

9 PB

SPECIFICATIONS

Electrical Data

WARNING

ELECTRIC SHOCK HAZARD

Turn off electric power before service or

installation.

All electrical connections and wiring MUST be

the National Electrical Code and all local codes

which have jurisdiction.

Failure to do so can result in personal injury or

death.

NOTICE

FIRE HAZARD

electically unsafe conditions which could cause moderate

or serious property damage.

Read, understand and follow the above warning.

Figure 204 (Circuit Breaker / Plug / Receptacle / Cord Rating)

Model Circuit Rating

Breaker or T-D Fuse

Plug Face

(NEMA#)

Power Cord

Length (ft.)

Wall Outlet

Appearance

ALL CCF MODELS. CCW06B10A,

CCW08B10A, CCW10B10A,

CCW12B10A

125V-15A 5-15P

Chill® Premier

CCW15B10A 5.5

UNI-FIT®

UCT08A10A, UCT10A10A,

UCT12A10A 6

Chill® Premier

CCW18B30A, CCW24B30A

250V - 15A

6 - 15P 4.5

UNI-FIT®

UET10A33A, UET12A33A,

UET14A33A

6-20P 6

Chill® Premier

CCW18B30A, CCW24B30A

250V-20A 6-20P

UNI-FIT®

UET10A33A, UET12A33A,

UET14A33A

4.75

10 PB

WARNING

Electrical Shock Hazard

Make sure your electrical receptacle

has the same conguration as your air

conditioner’s plug. If different, consult

a Licensed Electrician.

Do not use plug adapters.

Do not use an extension cord.

Do not remove ground prong.Always

plug into a grounded 3 prong outlet.

Failure to follow these instructions

can result in death, re, or electrical

shock.

Wire Size - Use ONLY wiring size recommended for single outlet branch circuit.

Fuse/ Circuit Breaker - Use ONLY the correct HACR type and size fuse/circuit breaker. Read electrical ratings on

unit’s rating plate. Proper circuit protection is the responsibiity of the homeowner.

Grounding - Unit MUST be grounded from branch circuit through service cord to unit, or through separate ground

wire provided on permanently connected units. Be sure that branch circuit or general purpose outlet is grounded.

Receptacle - The eld supplied outlet must match plug on service cord and be within reach of service cord. Do

NOT alter the service cord or plug. Do NOT use an extension cord. Refer to the table above for proper receptacle

and fuse type.

Make sure the wiring is adequate for your unit.

If you have fuses, they should be of the time delay type. Before you install or relocate this unit, be sure that the

amperage rating of the circuit breaker or time delay fuse does not exceed the amp rating listed in Table 206.

DO NOT use an extension cord.

The cord provided will carry the proper amount of electrical power to the unit; an extension cord may not.

Make sure that the receptacle is compatible with the air conditioner cord plug provided.

Proper grounding must be maintained at all times. Two prong receptacles must be

replaced with a grounded receptacle by a certied electrician.

The grounded receptacle should meet all national and local codes and ordinances. You must use the three prong plug

furnished with the air conditioner. Under no circumstances should you remove the ground prong from the plug.

SPECIFICATIONS

Electrical Data

Otros manuales para Chill Premier Series

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Acondicionador de aire de Friedrich

Friedrich

Friedrich WallMaster WS Series Manual de usuario

Friedrich

Friedrich ZQ08B10 Instrucciones de construcción

Friedrich

Friedrich CP14 Manual de usuario

Friedrich

Friedrich Breeze BRO412W1A Manual de usuario

Friedrich

Friedrich QuietMaster SS14 Manual de usuario

Friedrich

Friedrich HAZARDGARD SH15L30-B Guía

Friedrich

Friedrich KUHL R-410A Manual de usuario

Friedrich

Friedrich KCS08A10A Manual de usuario

Friedrich

Friedrich PDE07K Series Manual de usuario

Friedrich

Friedrich Kuhl KCM21A30A Manual de usuario

Friedrich

Friedrich M18YJ Manual de usuario

Friedrich

Friedrich CP10 Guía

Friedrich

Friedrich QuietMaster Electronic SS09 Manual de usuario

Friedrich

Friedrich MWM09Y1J Manual de usuario

Friedrich

Friedrich MW09Y3H Instrucciones de construcción

Friedrich

Friedrich ZStar ZQ05A10B Instrucciones de construcción

Friedrich

Friedrich MW24Y3F Manual de usuario

Friedrich

Friedrich Chill CP18 Manual de usuario

Friedrich

Friedrich MR30C3F Manual de usuario

Friedrich

Friedrich CP10 Manual de usuario

Friedrich

Friedrich M09YJ Manual de usuario

Friedrich

Friedrich C36YJ Manual de usuario

Friedrich

Friedrich DVKA Manual de usuario

Friedrich

Friedrich MWM12Y1J Manual de usuario

Manuales populares de Acondicionador de aire de otras marcas

Spheros

Spheros CC 355 Manual de usuario

Bosch

Bosch Climate 5000 SCI 24 CAS/ OU- OUE Manual de usuario

Panasonic

Panasonic CS-E12HKEW Manual de usuario

nedis

nedis ACMB1WT7 Manual de usuario

Samsung

Samsung AR KV Series Guía

Daikin

Daikin FCFV50A Manual de usuario

Fujitsu

Fujitsu Inverter ASBA30JFC Manual de usuario

Toshiba

Toshiba RAS-M10SMUV-E Manual de usuario

Daikin

Daikin FXLQ20MAVE Manual de usuario

Hitachi

Hitachi RAS-E24CAK Manual de usuario

CIAT

CIAT Magister 2 Series Guía

Bestron

Bestron AAC6000 Manual de usuario

Hisense

Hisense 7K Manual técnico

Frigidaire

Frigidaire FFRE0533S1E0 Manual de usuario

Samsung

Samsung AS09HM3N Manual de usuario

Frigidaire

Frigidaire CRA073PU11 Manual del propietario

Soleus Air

Soleus Air GB-PAC-08E4 Manual de usuario

McQuay

McQuay MCK020A Manual de usuario