Freescale Semiconductor PowerPC e500 Core Manual de usuario

PowerPC™ e500 Core

Family Reference Manual

Supports

e500v1

e500v2

E500CORERM

Rev. 1, 4/2005

Freescale™ and the Freescale logo are trademarks of Freescale Semiconductor, Inc. The described

product is a PowerPC microprocessor core. The PowerPC name is a trademark of IBM Corp. and is

used under license. All other product or service names are the property of their respective owners.

Document Number: E500CORERM

Rev. 1, 4/2005

Information in this document is provided solely to enable system and software

implementers to use Freescale Semiconductor products. There are no express or

implied copyright licenses granted hereunder to design or fabricate any integrated

circuits or integrated circuits based on the information in this document.

Freescale Semiconductor reserves the right to make changes without further notice to

any products herein. Freescale Semiconductor makes no warranty, representation or

guarantee regarding the suitability of its products for any particular purpose, nor does

Freescale Semiconductor assume any liability arising out of the application or use of

any product or circuit, and specifically disclaims any and all liability, including without

limitation consequential or incidental damages. “Typical” parameters which may be

provided in Freescale Semiconductor data sheets and/or specifications can and do

vary in different applications and actual performance may vary over time. All operating

parameters, including “Typicals” must be validated for each customer application by

customer’s technical experts. Freescale Semiconductor does not convey any license

under its patent rights nor the rights of others. Freescale Semiconductor products are

not designed, intended, or authorized for use as components in systems intended for

surgical implant into the body, or other applications intended to support or sustain life,

or for any other application in which the failure of the Freescale Semiconductor product

could create a situation where personal injury or death may occur. Should Buyer

purchase or use Freescale Semiconductor products for any such unintended or

unauthorized application, Buyer shall indemnify and hold Freescale Semiconductor

and its officers, employees, subsidiaries, affiliates, and distributors harmless against all

claims, costs, damages, and expenses, and reasonable attorney fees arising out of,

directly or indirectly, any claim of personal injury or death associated with such

unintended or unauthorized use, even if such claim alleges that Freescale

Semiconductor was negligent regarding the design or manufacture of the part.

How to Reach Us:

Home Page:

www.freescale.com

email:

support@freescale.com

USA/Europe or Locations Not Listed:

Freescale Semiconductor

Technical Information Center, CH370

1300 N. Alma School Road

Chandler, Arizona 85224

(800) 521-6274

480-768-2130

support@freescale.com

Europe, Middle East, and Africa:

Freescale Halbleiter Deutschland GmbH

Technical Information Center

Schatzbogen 7

81829 Muenchen, Germany

+44 1296 380 456 (English)

+46 8 52200080 (English)

+49 89 92103 559 (German)

+33 1 69 35 48 48 (French)

support@freescale.com

Japan:

Freescale Semiconductor Japan Ltd.

Headquarters

ARCO Tower 15F

1-8-1, Shimo-Meguro, Meguro-ku

Tokyo 153-0064, Japan

0120 191014

+81 2666 8080

support.japan@freescale.com

Asia/Pacific:

Freescale Semiconductor Hong Kong Ltd.

Technical Information Center

2 Dai King Street

Tai Po Industrial Estate,

Tai Po, N.T., Hong Kong

+800 2666 8080

support.asia@freescale.com

For Literature Requests Only:

Freescale Semiconductor

Literature Distribution Center

P.O. Box 5405

Denver, Colorado 80217

(800) 441-2447

303-675-2140

Fax: 303-675-2150

LDCForFreescaleSemiconductor

@hibbertgroup.com

Part I—e500 Core I

Core Complex Overview 1

Instruction Model 3

Execution Timing 4

Interrupts and Exceptions 5

Power Management 6

Performance Monitor 7

Debug Support 8

Part II—e500 Core Complex II

Timer Facilities 9

Auxiliary Processing Units (APUs) 10

L1 Caches 11

Memory Management Units 12

Core Complex Bus (CCB) 13

Appendix A—Programming Examples A

Appendix B—Guidelines for 32-Bit Book E B

Appendix C—Simplified Mnemonics for PowerPC Instructions C

Appendix D—Opcode Listings D

Appendix E—Revision History E

Index IND

IPart I—e500 Core

1Core Complex Overview

2Register Model

3Instruction Model

41Execution Timing

5Interrupts and Exceptions

6Power Management

7Performance Monitor

8Debug Support

II Part II—e500 Core Complex

9Timer Facilities

10 Auxiliary Processing Units (APUs)

11 L1 Caches

12 Memory Management Units

13 Core Complex Bus (CCB)

AAppendix A—Programming Examples

BAppendix B—Guidelines for 32-Bit Book E

CAppendix C—Simplified Mnemonics for PowerPC Instructions

DAppendix D—Opcode Listings

EAppendix E—Revision History

IND Index

PowerPC e500 Core Family Reference Manual, Rev. 1

Freescale Semiconductor v

Contents

Paragraph

Number Title

Page

Number

Co nt en t s

About This Book

Audience.......................................................................................................................xxxii

Organization.................................................................................................................. xxxii

Suggested Reading....................................................................................................... xxxiii

General Information............................................................................................. xxxiii

Related Documentation ....................................................................................... xxxiv

Conventions ................................................................................................................. xxxiv

Terminology Conventions..............................................................................................xxxv

Part I

e500 Core

Chapter 1

Core Complex Overview

1.1 Overview.......................................................................................................................... 1-1

1.1.1 Upward Compatibility ................................................................................................. 1-3

1.1.2 Core Complex Summary ............................................................................................. 1-3

1.2 e500 Processor and System Version Numbers.................................................................1-5

1.3 Features............................................................................................................................1-5

1.3.1 e500v2 Differences.................................................................................................... 1-11

1.4 Instruction Set................................................................................................................1-12

1.5 Instruction Flow.............................................................................................................1-14

1.5.1 Initial Instruction Fetch.............................................................................................. 1-14

1.5.2 Branch Detection and Prediction............................................................................... 1-14

1.5.3 e500 Execution Pipeline ............................................................................................ 1-16

1.6 Programming Model...................................................................................................... 1-18

1.7 On-Chip Cache Implementation.................................................................................... 1-20

1.8 Interrupts and Exception Handling................................................................................ 1-20

1.8.1 Exception Handling ................................................................................................... 1-20

1.8.2 Interrupt Classes ........................................................................................................ 1-21

1.8.3 Interrupt Types........................................................................................................... 1-21

1.8.4 Upper Bound on Interrupt Latencies ......................................................................... 1-22

1.8.5 Interrupt Registers...................................................................................................... 1-22

1.9 Memory Management.................................................................................................... 1-24

1.9.1 Address Translation ................................................................................................... 1-26

1.9.2 MMU Assist Registers (MAS0–MAS4 and MAS6–MAS7).....................................1-27

PowerPC e500 Core Family Reference Manual, Rev. 1

vi Freescale Semiconductor

Contents

Paragraph

Number Title

Page

Number

1.9.3 Process ID Registers (PID0–PID2)............................................................................ 1-28

1.9.4 TLB Coherency.......................................................................................................... 1-28

1.10 Memory Coherency ....................................................................................................... 1-29

1.10.1 Atomic Update Memory References ......................................................................... 1-29

1.10.2 Memory Access Ordering.......................................................................................... 1-29

1.10.3 Cache Control Instructions ........................................................................................ 1-29

1.10.4 Programmable Page Characteristics .......................................................................... 1-30

1.11 Core Complex Bus (CCB) ............................................................................................. 1-30

1.12 Performance Monitoring................................................................................................ 1-30

1.12.1 Global Control Register............................................................................................. 1-31

1.12.2 Performance Monitor Counter Registers................................................................... 1-31

1.12.3 Local Control Registers............................................................................................. 1-31

1.13 Legacy Support of PowerPC Architecture..................................................................... 1-32

1.13.1 Instruction Set Compatibility..................................................................................... 1-32

1.13.1.1 User Instruction Set ............................................................................................... 1-32

1.13.1.2 Supervisor Instruction Set...................................................................................... 1-32

1.13.2 Memory Subsystem ................................................................................................... 1-33

1.13.3 Exception Handling ................................................................................................... 1-33

1.13.4 Memory Management................................................................................................ 1-33

1.13.5 Reset...........................................................................................................................1-34

1.13.6 Little-Endian Mode.................................................................................................... 1-34

Chapter 2

2.1 Overview.......................................................................................................................... 2-1

2.2 e500 Register Model........................................................................................................ 2-2

2.2.1 Special-Purpose Registers (SPRs) ............................................................................... 2-5

2.3 Registers for Integer Operations...................................................................................... 2-9

2.3.1 General-Purpose Registers (GPRs).............................................................................. 2-9

2.3.2 Integer Exception Register (XER)............................................................................... 2-9

2.4 Registers for Branch Operations...................................................................................... 2-9

2.4.1 Condition Register (CR).............................................................................................. 2-9

2.4.2 Link Register (LR)..................................................................................................... 2-10

2.4.3 Count Register (CTR)................................................................................................ 2-10

2.5 Processor Control Registers........................................................................................... 2-10

2.5.1 Machine State Register (MSR).................................................................................. 2-10

2.5.2 Processor ID Register (PIR) ...................................................................................... 2-12

2.5.3 Processor Version Register (PVR)............................................................................. 2-13

2.5.4 System Version Register (SVR)................................................................................. 2-13

PowerPC e500 Core Family Reference Manual, Rev. 1

Freescale Semiconductor vii

Contents

Paragraph

Number Title

Page

Number

2.6 Timer Registers..............................................................................................................2-14

2.6.1 Timer Control Register (TCR)................................................................................... 2-15

2.6.2 Timer Status Register (TSR)...................................................................................... 2-16

2.6.3 Time Base (TBU and TBL) ....................................................................................... 2-16

2.6.4 Decrementer Register (DEC)..................................................................................... 2-16

2.6.5 Decrementer Auto-Reload Register (DECAR)..........................................................2-16

2.6.6 Alternate Time Base Registers (ATBL and ATBU)................................................... 2-16

2.6.6.1 Alternate Time Base Upper (ATBU) ..................................................................... 2-17

2.7 Interrupt Registers..........................................................................................................2-17

2.7.1 Interrupt Registers Defined by Book E......................................................................2-18

2.7.1.1 Save/Restore Register 0/1 (SRR0 and SRR1) .......................................................2-18

2.7.1.2 Critical Save/Restore Register 0/1 (CSRR0 and CSRR1)..................................... 2-18

2.7.1.3 Data Exception Address Register (DEAR)............................................................ 2-18

2.7.1.4 Interrupt Vector Prefix Register (IVPR)................................................................ 2-19

2.7.1.5 Interrupt Vector Offset Registers (IVORs)............................................................ 2-19

2.7.1.6 Exception Syndrome Register (ESR) ....................................................................2-20

2.7.2 e500-Specific Interrupt Registers .............................................................................. 2-22

2.7.2.1 Machine Check Save/Restore Register 0 (MCSRR0)...........................................2-22

2.7.2.2 Machine Check Save/Restore Register 1 (MCSRR1)...........................................2-22

2.7.2.3 Machine Check Address Register (MCAR) .......................................................... 2-22

2.7.2.4 Machine Check Syndrome Register (MCSR)........................................................ 2-23

2.8 Software-Use SPRs (SPRG0–SPRG7 and USPRG0) ................................................... 2-24

2.9 Branch Target Buffer (BTB) Registers.......................................................................... 2-24

2.9.1 Branch Buffer Entry Address Register (BBEAR) ..................................................... 2-25

2.9.2 Branch Buffer Target Address Register (BBTAR)....................................................2-25

2.9.3 Branch Unit Control and Status Register (BUCSR)..................................................2-26

2.10 Hardware Implementation-Dependent Registers...........................................................2-27

2.10.1 Hardware Implementation-Dependent Register 0 (HID0).........................................2-27

2.10.2 Hardware Implementation-Dependent Register 1 (HID1).........................................2-29

2.11 L1 Cache Configuration Registers................................................................................. 2-31

2.11.1 L1 Cache Control and Status Register 0 (L1CSR0) .................................................. 2-31

2.11.2 L1 Cache Control and Status Register 1 (L1CSR1) .................................................. 2-33

2.11.3 L1 Cache Configuration Register 0 (L1CFG0) .........................................................2-34

2.11.4 L1 Cache Configuration Register 1 (L1CFG1) .........................................................2-35

2.12 MMU Registers.............................................................................................................. 2-35

2.12.1 Process ID Registers (PID0–PID2)............................................................................ 2-36

2.12.2 MMU Control and Status Register 0 (MMUCSR0)..................................................2-36

2.12.3 MMU Configuration Register (MMUCFG) .............................................................. 2-37

PowerPC e500 Core Family Reference Manual, Rev. 1

viii Freescale Semiconductor

Contents

Paragraph

Number Title

Page

Number

2.12.4 TLB Configuration Registers (TLBnCFG) ............................................................... 2-37

2.12.4.1 TLB0 Configuration Register (TLB0CFG)...........................................................2-38

2.12.4.2 TLB1 Configuration Register 1 (TLB1CFG)........................................................2-39

2.12.5 MMU Assist Registers (MAS0–MAS4, MAS6–MAS7) .......................................... 2-39

2.12.5.1 MAS Register 0 (MAS0)....................................................................................... 2-40

2.12.5.2 MAS Register 1 (MAS1)....................................................................................... 2-41

2.12.5.3 MAS Register 2 (MAS2)....................................................................................... 2-42

2.12.5.4 MAS Register 3 (MAS3)....................................................................................... 2-43

2.12.5.5 MAS Register 4 (MAS4)....................................................................................... 2-43

2.12.5.6 MAS Register 6 (MAS6)....................................................................................... 2-44

2.12.5.7 MAS Register 7 (MAS7)—e500v2 Only..............................................................2-45

2.13 Debug Registers.............................................................................................................2-45

2.13.1 Debug Control Registers (DBCR0–DBCR2)............................................................ 2-46

2.13.1.1 Debug Control Register 0 (DBCR0)......................................................................2-46

2.13.1.2 Debug Control Register 1 (DBCR1)......................................................................2-46

2.13.1.3 Debug Control Register 2 (DBCR2)......................................................................2-47

2.13.2 Debug Status Register (DBSR).................................................................................. 2-47

2.13.3 Instruction Address Compare Registers (IAC1–IAC4).............................................2-48

2.13.4 Data Address Compare Registers (DAC1–DAC2).................................................... 2-48

2.14 SPE and SPFP APU Registers....................................................................................... 2-49

2.14.1 Signal Processing and Embedded Floating-Point Status and Control

2.14.2 Accumulator (ACC)................................................................................................... 2-52

2.15 Performance Monitor Registers (PMRs) ....................................................................... 2-52

2.15.1 Global Control Register 0 (PMGC0)......................................................................... 2-53

2.15.2 User Global Control Register 0 (UPMGC0).............................................................. 2-54

2.15.3 Local Control A Registers (PMLCa0–PMLCa3) ...................................................... 2-55

2.15.4 User Local Control A Registers (UPMLCa0–UPMLCa3)........................................2-56

2.15.5 Local Control B Registers (PMLCb0–PMLCb3)...................................................... 2-56

2.15.6 User Local Control B Registers (UPMLCb0–UPMLCb3)........................................ 2-57

2.15.7 Performance Monitor Counter Registers (PMC0–PMC3).........................................2-57

2.15.8 User Performance Monitor Counter Registers (UPMC0–UPMC3).......................... 2-58

2.16 Synchronization Requirements for SPRs....................................................................... 2-58

Chapter 3

Instruction Model

3.1 Operand Conventions ...................................................................................................... 3-1

3.1.1 Data Organization in Memory and Data Transfers......................................................3-1

3.1.2 Alignment and Misaligned Accesses........................................................................... 3-2

PowerPC e500 Core Family Reference Manual, Rev. 1

Freescale Semiconductor ix

Contents

Paragraph

Number Title

Page

Number

3.1.3 e500 Floating-Point Implementation ........................................................................... 3-2

3.1.4 Unsupported Book E Instructions................................................................................ 3-3

3.2 Instruction Set Summary ................................................................................................. 3-5

3.2.1 Classes of Instructions ................................................................................................. 3-6

3.2.2 Definition of Boundedly Undefined............................................................................ 3-6

3.2.3 Synchronization Requirements.................................................................................... 3-6

3.2.3.1 Synchronization Requirements for e500-Specific SPRs .........................................3-8

3.2.3.2 Synchronization with tlbwe and tlbivax Instructions...........................................3-10

3.2.3.3 Context Synchronization ....................................................................................... 3-11

3.2.3.4 Execution Synchronization.................................................................................... 3-11

3.2.3.5 Instruction-Related Interrupts................................................................................ 3-12

3.3 Instruction Set Overview ............................................................................................... 3-13

3.3.1 Book E User-Level Instructions ................................................................................ 3-13

3.3.1.1 Integer Instructions................................................................................................ 3-13

3.3.1.1.1 Integer Arithmetic Instructions.......................................................................... 3-13

3.3.1.1.2 Integer Compare Instructions ............................................................................ 3-15

3.3.1.1.3 Integer Logical Instructions............................................................................... 3-15

3.3.1.1.4 Integer Rotate and Shift Instructions................................................................. 3-16

3.3.1.2 Load and Store Instructions................................................................................... 3-17

3.3.1.2.1 Self-Modifying Code......................................................................................... 3-17

3.3.1.2.2 Integer Load and Store Address Generation......................................................3-18

3.3.1.2.3 Integer Load Instructions................................................................................... 3-20

3.3.1.2.4 Integer Store Instructions................................................................................... 3-21

3.3.1.2.5 Integer Load and Store with Byte-Reverse Instructions.................................... 3-22

3.3.1.2.6 Integer Load and Store Multiple Instructions.................................................... 3-22

3.3.1.3 Branch and Flow Control Instructions................................................................... 3-23

3.3.1.3.1 Conditional Branch Control............................................................................... 3-23

3.3.1.3.2 Branch Instructions............................................................................................ 3-24

3.3.1.3.3 Condition Register Logical Instructions............................................................ 3-25

3.3.1.3.4 Trap Instructions................................................................................................ 3-25

3.3.1.4 System Linkage Instruction................................................................................... 3-26

3.3.1.5 Processor Control Instructions............................................................................... 3-26

3.3.1.5.1 Move to/from Condition Register Instructions.................................................. 3-26

3.3.1.5.2 Move to/from Special-Purpose Register Instructions........................................ 3-26

3.3.1.6 Memory Synchronization Instructions .................................................................. 3-30

3.3.1.6.1 mbar (MO = 1).................................................................................................. 3-31

3.3.1.7 Atomic Update Primitives Using lwarx and stwcx............................................... 3-32

3.3.1.7.1 Reservations....................................................................................................... 3-34

3.3.1.7.2 Forward Progress............................................................................................... 3-36

3.3.1.7.3 Reservation Loss Due to Granularity ................................................................ 3-36

PowerPC e500 Core Family Reference Manual, Rev. 1

xFreescale Semiconductor

Contents

Paragraph

Number Title

Page

Number

3.3.1.8 Memory Control Instructions ................................................................................ 3-37

3.3.1.8.1 User-Level Cache Instructions .......................................................................... 3-37

3.3.2 Supervisor-Level Instructions.................................................................................... 3-39

3.3.2.1 System Linkage Instructions.................................................................................. 3-39

3.3.2.2 Supervisor-Level Memory Control Instructions.................................................... 3-40

3.3.2.2.1 Supervisor-Level Cache Instruction .................................................................. 3-40

3.3.2.2.2 Supervisor-Level TLB Management Instructions.............................................3-41

3.3.3 Recommended Simplified Mnemonics...................................................................... 3-42

3.3.4 Book E Instructions with Implementation-Specific Features.................................... 3-43

3.3.5 e500 Instructions........................................................................................................ 3-43

3.3.6 Context Synchronization............................................................................................ 3-44

3.4 Memory Access Alignment Support.............................................................................. 3-44

3.5 Using msync and mbar to Order Memory Accesses....................................................3-45

3.5.1 Lock Acquisition and Import Barriers....................................................................... 3-45

3.5.1.1 Acquire Lock and Import Shared Memory............................................................ 3-45

3.5.1.2 Obtain Pointer and Import Shared Memory .......................................................... 3-45

3.5.1.3 Lock Release and Export Barriers......................................................................... 3-46

3.5.1.3.1 Export Shared Memory and Release Lock........................................................3-46

3.5.1.3.2 Export Shared Memory and Release Lock using mbar (MO = 0).................... 3-47

3.5.2 Safe Fetch ..................................................................................................................3-47

3.6 Update Instructions........................................................................................................ 3-47

3.7 Memory Synchronization .............................................................................................. 3-48

3.8 EIS-Defined Instructions and APUs Implemented on the e500 .................................... 3-48

3.8.1 SPE and Embedded Floating-Point APUs................................................................. 3-49

3.8.1.1 SPE Operands: Signed Fractions........................................................................... 3-51

3.8.1.2 SPE Integer and Fractional Operations.................................................................. 3-52

3.8.1.3 SPE APU Instructions............................................................................................ 3-52

3.8.1.4 Embedded Floating-Point APU Instructions.........................................................3-58

3.8.2 Integer Select (isel) APU........................................................................................... 3-60

3.8.3 Performance Monitor APU........................................................................................ 3-60

3.8.4 Cache Locking APU.................................................................................................. 3-61

3.8.5 Machine Check APU ................................................................................................. 3-63

3.9 e500-Specific Instructions ............................................................................................. 3-63

3.9.1 Branch Target Buffer (BTB) Locking Instructions.................................................... 3-63

3.10 Instruction Listing.......................................................................................................... 3-66

Tabla de contenidos

Otros manuales de Placa madre de Freescale Semiconductor

Freescale Semiconductor

Freescale Semiconductor i.MX28 EVK Manual de usuario

Freescale Semiconductor

Freescale Semiconductor MPC5675EVB Manual de usuario

Freescale Semiconductor

Freescale Semiconductor M52259DEMOKIT Manual de usuario

Freescale Semiconductor

Freescale Semiconductor KIT22XS4200EKEVB Manual de usuario

Freescale Semiconductor

Freescale Semiconductor KIT33879AEKEVBE Manual de usuario

Freescale Semiconductor

Freescale Semiconductor FRDM-KL25Z Manual de usuario

Freescale Semiconductor

Freescale Semiconductor TWR-K65F180M Manual de usuario

Freescale Semiconductor

Freescale Semiconductor KL25Z128VLK Manual de usuario

Freescale Semiconductor

Freescale Semiconductor i.MX 6UltraLite Manual de instalación

Freescale Semiconductor

Freescale Semiconductor KIT33810EKEVME Manual de usuario

Freescale Semiconductor

Freescale Semiconductor MPC5748G EVB Manual de usuario

Freescale Semiconductor

Freescale Semiconductor TWR-MPC5125 Manual de usuario

Freescale Semiconductor

Freescale Semiconductor IB112 Manual de usuario

Freescale Semiconductor

Freescale Semiconductor S12XF Starter Kit Manual de usuario

Freescale Semiconductor

Freescale Semiconductor TWR-LS1021A Manual de usuario

Freescale Semiconductor

Freescale Semiconductor KIT33730EKEVBE Manual de usuario

Freescale Semiconductor

Freescale Semiconductor DSPD56362EVM Guía de inicio rápido

Freescale Semiconductor

Freescale Semiconductor FRDM-KV31F Manual de usuario

Freescale Semiconductor

Freescale Semiconductor ColdFire MCF5275 Manual de usuario

Freescale Semiconductor

Freescale Semiconductor TWR-K40D100M Manual de usuario

Freescale Semiconductor

Freescale Semiconductor KIT33882EKEVB Manual de usuario

Freescale Semiconductor

Freescale Semiconductor S12ZVC Manual de usuario

Freescale Semiconductor

Freescale Semiconductor M5407C3 Manual de usuario

Freescale Semiconductor

Freescale Semiconductor MSC8156 Manual de usuario

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Gigabyte

Gigabyte GA-9IVDT Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario