Fosi Audio BT20A PRO Manual de usuario

BT20A PRO User Manual

Product Overview

Power

Indicator

RCA

Input

3.5mm

PRE OUT

Speakers

Output

Input

Bluetooth

Antenna

Treble

Control

The Bass/Treble knobs with midpoint position

Long press 5s to clear all bluetooth pairing records

Bass

Control

Volume

Control

Power

Switch

Product Specifications

Fosi Audio BT20A PRO is an upgraded Bluetooth 5.0 HiFi stereo amplifier

with PRE-OUT port, which can be used as a preamplifier. The BT20A PRO

supports RCA/Bluetooth input, suitable for most passive speakers as well

as active ones.

It adopts TI TPA3255 high-performance Class-D power amplifier chip

enabling true premium sound quality and allows ultra low distortion across

the audio band.

The BT20A PRO is mounted with high-power inductors.

Package Contents

BT20A PRO Bluetooth Amplifier ×1

Bluetooth Antenna ×1

Power Adapter ×1

AC Cord ×1

User Manual ×1

Audio Input

Audio Output

Power Output

SNR

Terminating Impedances

THD

Power Amplifier Chip

Power Adapter

DC Input Range

Frequency Response Range

Bluetooth Transmission Distance

RCA/Bluetooth

Speaker Output/3.5mm Pre out

300Wx2 @4Ω

≥108dB

2-8Ω

0.005%

TPA3255

32V 5A

DC24V-48V

20Hz-20kHz(±1.2dB)

Up to 50Ft

Quick Steup

Basic operation

Step 1: Install the Bluetooth antenna to the BT20A PRO.

Step 2: Connect your passive speakers to the BT20A PRO via speaker

wires.

NOTE: The PRE OUT can be connected to an active subwoofer and

speakers. Or you can connect it to the PRE OUT as a preamplifier.

You don’t need to connect all the outputs. You can connect 2 passive

speakers only.

And you can connect all the outputs simultaneously.

Step 3: Connect the power supply to BT20A PRO and the socket. Flip the

switch's toggle to power on the BT20A PRO.

Then the input mode indicator light of BT20A PRO stays red after

powered on.

NOTE 1: Please make sure the LED light on the power adapter stays on.

NOTE 2: Before connecting the power supply, please set the bass

and treble control to the center position and set the volume to zero to

avoid sudden loud noise.

Step 4: Connect the audio source (RCA input/Bluetooth input) to the

BT20A PRO.

Step 5: Adjust the Volume control, Bass/Treble control, then enjoy it!

NOTE: Make sure that all the cables are completely pushed into the

device.

Connectivity

RCA Input:

Use an RCA cable to connect the BT20A PRO and your device. The input

indicator light will stay on Red.

Bluetooth Input:

Turn on the Bluetooth on your device, and select "Fosi Audio BT20A PRO"

for pairing, the input mode indicator light will stay blue after a successful

connection.

Input priority: The Bluetooth input mode first.

NOTE: Please keep the Fosi Audio BT20A PRO away from other electrical

devices. The Fosi Audio BT20A PRO can't use with a radio at the same

time.

TIP: How to change/replace op-amp?

It is built in with two plug-in NE5532 Op-Amps, different op amps make

different sound quality, it can be replaced by LME49720HA/MUSES02/O-

PA26041P/OPA2134PA/LM4562/NJM4556AD Op-Amps etc.

Use a hex screwdriver to remove the back panel screws, pull the board out

and unplug the op-amp, align the holes and reassemble the other

op-amps.

Video Tutorial:

https://www.fosiaudio.com/how-to/change-bt20a-pro-op-amp-chip

TIP: How to clear the Bluetooth connection?

Press and hold the volume knob for 5 seconds and it will be disconnected.

screw

front panel

circuit board

amp chip

chip

socket

Troubleshooting/QA

Get noise when playing music?

• Bluetooth input mode: Try to use other Bluetooth devices. Weak or

unstable Bluetooth signal will cause this problem, try to place your

device nearer to the BT20A PRO.

• RCA input mode: Please change the audio cable to try.

•Try another RCA cable and make sure the audio cable is connected

correctly.

• Please unplug the RCA cable from the amplifier, and then turn it on to

try.

• Please change the audio source or other brand devices to try.

• Did you set the "treble" gain to the max? please turn the "Treble" gain

down.

• Make sure all cables are all securely in place and correctly

connected.

• Please keep this device away from other electronic devices.

All cables are connected, but there is no audio output?

• Check to make sure the indicator lights on the front panel of the

BT20A PRO and the power supply are both on.

• If the indicator light is on, please check if the volume knob is at the

minimum level. If yes, please turn up the volume.

• Make sure that the BT20A PRO is set to the input mode you want.

Note: Bluetooth input mode (The input mode indicator light will stay

on blue)

RCA input mode (The input mode indicator light will stay on red)

Input priority: The Bluetooth input mode first.

• Please check if the audio source is paused.

• Please try to change the sound source, cables, and speakers.

• Try restarting both your device and BT20A PRO, then connect again.

NOTE: Make sure that all the cables are completely pushed into the

device.

My Bluetooth device can’t be paired with the BT20A Pro?

• Check to make sure the BT20A PRO is powered on and the LED light

on the power adapter stays on.

• Ensure that the BT20A PRO is not paired with another device.

01.

02.

03.

• Make sure that the distance between your device and the BT20A

PRO is not too far, place your device nearer to the BT20A PRO.

• Make sure there are no obstacles between your device and the

BT20A PRO. Obstacles will affect the Bluetooth operation distance.

• Please try to change to another Bluetooth audio source to test.

• Please replug the power supply, move the amplifier to another room

and test it again.

• Restart the BT20A PRO and then try to connect again, try to use

another brand of mobile phone or device.

Why the sound is intermittent in Bluetooth mode?

• Use another Bluetooth device to have a try.

• Ensure that there is no other electronic equipment between the

BT20A PRO and the audio source which may cause interference.

• Put your device closer to the BT20A PRO.

• Replug the power supply.

One channel does not work?

• Please test whether the Bluetooth and AUX inputs have the same

problem first.

• If these two modes have the same problem, swap the speaker

cables of the left and right channels, or change to use another

speaker, and then test whether this channel still does not work;

• If only AUX mode does not work, change the audio source, change

the audio cable, and test again, and make sure that the audio source

and cables both deliver stereo sound, not MONO.

Can’t be powered on?

• Make sure that the LED light on the power adapter stays on.

• If it does not light up: Unplug the power adapter from the BT20A

PRO, plug the power adapter directly into the AC power source, and

see if the LED will light up. If it still does not light up, there may be a

problem with the power adapter. Please contact us to replace the

power adapter.

• You can use a DC 24V-48V power adapter of a camera or router to

connect the BT20A PRO to test whether it can be turned on.

The BT20A Pro can be used as a pre-amp?

• Yes. There is a PRE-OUT port on the rear panel, which allows it to be

04.

05.

06.

07.

used as a preamplifier.

Sound quality is not good?

• Make sure all the cables are fully connected.

• Adjust the treble and bass control of the BT20A PRO to find the right

tone.

• Please try to change the sound source and cables to test.

Why does the sound cut in and cut out?

• Try to reduce the sound of the sound source.

• Try to change the audio source to test.

• Reduce the gain of the treble and bass knob on the BT20A PRO.

• Ensure that the positive and negative poles of the speaker output do

not touch together. Some relatively large banana plugs are easy to

touch together and cause a short circuit.

Does the BT20A PRO support Bluetooth aptX and Low

Latency?

• No. The BT20A PRO does not support Dolby, aptX, aptX HD or aptX

Low Latency.

Can this amp be left on all the time?

• It can be connected all the time and it is safe without power

consumption.

Can I listen to two audio inputs at the same time?

• No, only one mode can be used at a time.

08.

09.

10.

11.

12.

Warranty Information

All Fosi Audio products have an 18-month limited warranty on parts and

labor from the date of purchase. Please contact us if you have any

problems.

About Fosi Audio

Fosi Audio designs and builds innovative audio products with all your

music in mind. Great sound, simple but elegant designs, high-quality

materials, and truly useful features are what Fosi Audio is about. We

sincerely hope you get as much enjoyment from our products as we’ve had

to create them!

Our website:

www.fosiaudio.com

Amazon store:

www.amazon.com/fosiaudio

Our Youtube channel:

Fosi Audio

Our Facebook page:

Fosi Audio

WhatsApp:

+86 13716612254

Call us:

+49 33389171782

After-sale Service and Technical Support Email:

[email protected]

製品の概要

電源

インジケータ

RCA

入力

3.5mm

プリアウト

スピーカー

出力

入力

Bluetooth

アンテナ

高音

コントロール

中間位置の低音/高音ノブ

5 秒を長押しして、すべての Bluetooth

ペアリング記録を消去します

低音

コントロール

音量

調整

電源

スイッチ

Tabla de contenidos

Idiomas:

Otros manuales de Amplificador de Fosi Audio

Fosi Audio

Fosi Audio BT30A Manual de usuario

Fosi Audio

Fosi Audio HD3 DSD DAC Manual de usuario

Fosi Audio

Fosi Audio BL20A Manual de usuario

Fosi Audio

Fosi Audio DAC-Q6 Manual de usuario

Fosi Audio

Fosi Audio P1 Manual de usuario

Fosi Audio

Fosi Audio DAC-Q4 Manual de usuario

Fosi Audio

Fosi Audio TP-02 Manual de usuario

Fosi Audio

Fosi Audio T10 Manual de usuario

Fosi Audio

Fosi Audio BL20A Manual de usuario

Fosi Audio

Fosi Audio DA-2120B Manual de usuario

Fosi Audio

Fosi Audio DA-2120D Manual de usuario

Fosi Audio

Fosi Audio BOX X2 Manual de usuario

Fosi Audio

Fosi Audio BT20A Manual de usuario

Fosi Audio

Fosi Audio BT20A Manual de usuario

Fosi Audio

Fosi Audio PH05 Manual de usuario

Fosi Audio

Fosi Audio T10 Manual de usuario

Fosi Audio

Fosi Audio TDA7498E Manual de usuario

Fosi Audio

Fosi Audio T20 Manual de usuario

Fosi Audio

Fosi Audio K5 Manual de usuario

Fosi Audio

Fosi Audio T3 Manual de usuario

Fosi Audio

Fosi Audio BT20A Manual de usuario

Fosi Audio

Fosi Audio DA2120A Manual de usuario

Fosi Audio

Fosi Audio K5 Manual de usuario

Fosi Audio

Fosi Audio DAC-Q4 Manual de usuario

Manuales populares de Amplificador de otras marcas

ASTRO

ASTRO HVO V40 P Manual de usuario

Marantz

Marantz SUPERSCOPE BLA-545 Instrucciones de montaje

NAD

NAD CI980 Manual de usuario

Technics

Technics SE-CH770 Manual de usuario

Harman Kardon

Harman Kardon HK6300 Manual de usuario

NAD

NAD T975 Manual de usuario

McIntosh

McIntosh MA6850 Manual de usuario

Electro-Harmonix

Electro-Harmonix ENGLISH MUFF’N Manual de usuario

Viatron

Viatron Autrix Manual de usuario

GME

GME GA9800 Manual de usuario

Atlas

Atlas CP700 Manual de usuario

Roland

Roland KC-1000 Manual de usuario

Pyle

Pyle PFMRA350BW Manual de usuario

Advantage

Advantage S-250 Manual de usuario

IRT Electronics

IRT Electronics DVA-3007 Manual de usuario

Dimavery

Dimavery BA-100 Series Manual de usuario

Sony

Sony XM-S400D Manual de usuario

Schertler

Schertler ROY X Manual de usuario