Fluke 9062 Manual de usuario

PN 2438554

April 2005

All product names are trademarks of their respective companies.

9062

Motor and Phase Rotation Indicator

Users Manual

LIMITED WARRANTY AND LIMITATION OF LIABILITY

This Fluke product will be free from defects in material and workmanship for two

years from the date of purchase. This warranty does not cover fuses, disposable bat-

teries, or damage from accident, neglect, misuse, alteration, contamination, or ab-

normal conditions of operation or handling. Resellers are not authorized to extend

any other warranty on Fluke’s behalf. To obtain service during the warranty period,

contact your nearest Fluke authorized service center to obtain return authorization

information, then send the product to that Service Center with a description of the

problem.

THIS WARRANTY IS YOUR ONLY REMEDY. NO OTHER WARRANTIES, SUCH

AS FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSED OR IMPLIED.

FLUKE IS NOT LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSE-

QUENTIAL DAMAGES OR LOSSES, ARISING FROM ANY CAUSE OR THEORY.

Since some states or countries do not allow the exclusion or limitation of an implied

warranty or of incidental or consequential damages, this limitation of liability may not

apply to you.

Fluke Corporation

P.O. Box 9090

Everett, WA 98206-9090

U.S.A.

Fluke Europe B.V.

P.O. Box 1186

5602 BD Eindhoven

The Netherlands

11/99

Table of Contents

Title Page

Introduction.......................................................................................................... 1

Contacting Fluke ................................................................................................. 1

Unpacking the 9062 ............................................................................................ 2

Safety Information ............................................................................................... 2

Symbols............................................................................................................... 5

Elements of the 9062 .......................................................................................... 6

Using the Motor & Phase Rotation Indicator....................................................... 7

Determine Rotary Field Direction .................................................................... 7

Non-Contact Rotary Field Indication ............................................................... 9

Determine the Motor Connection .................................................................... 12

Magnetic Field Detection................................................................................. 13

Maintaining the 9062........................................................................................... 13

Cleaning........................................................................................................... 13

Replacing and Disposing of the Batteries ....................................................... 14

Specifications ...................................................................................................... 17

List of Tables

Table Title Page

1. Symbols ....................................................................................................... 5

2. Reliable Motor Test Requirements .............................................................. 11

List of Figures

Figure Title Page

1. The 9062 Motor and Phase Rotation Indicator............................................ 6

2. Phase Indication Table ................................................................................ 8

3. Motor Rotation ............................................................................................. 10

4. Battery Replacement ................................................................................... 16

9062

Introduction

The Fluke 9062 Motor and Phase Rotation Indicator (hereafter referred to, “the 9062”) is a

handheld, battery-operated instrument designed to detect the rotary field of three-phase

systems and determine motor-rotation direction.

Contacting Fluke

To contact Fluke, call one of the following telephone numbers:

USA: 1-888-44-FLUKE (1-888-443-5853)

Canada: 1-800-36-FLUKE (1-800-363-5853)

Europe: +31 402-675-200

Japan: +81-3-3434-0181

Singapore: +65-738-5655

Anywhere in the world: +1-425-446-5500

USA Service: 1-888-99-FLUKE (1-888-993-5853)

Or, visit Fluke's Web site at www.fluke.com.

To register your product, visit register.fluke.com

9062

Users Manual

Unpacking the 9062

The 9062 ships with the following items:

•3 test leads

•3 test probes

•3 alligator clips

•9 V battery

•Users Manual

If an item is damaged or missing, contact the place of purchase immediately.

Safety Information

A WCaution identifies conditions and actions that may damage the9062.

A XWWarning identifies conditions and actions that pose hazard(s) to the user.

Motor & Phase Rotation Indicator

Safety Information

XW Read First: Safety Information

To avoid possible electric shock or fire, do the following:

•Read the following safety information carefully before using or

servicing the instrument.

•Adhere to local and national safety codes.

•Individual protective equipment must be used to prevent shock and

injury

•Use of instrument in a manner not specified by the manufacturer may

impair safety features/protection provided by the equipment.

•Avoid working alone.

•Inspect the test leads for damaged insulation or exposed metal. Check

test lead continuity. Damaged leads must be replaced. Do not use the

9062 if it looks damaged.

•Be careful when working above 30 V ac rms, 42 V ac peak and 60 V dc.

Such voltages pose a shock hazard.

•When using the probes, keep fingers away from probe contacts. Keep

fingers behind the finger guards on the probes.

9062

Users Manual

•Measurements can be adversely affected by impedances of additional

operating circuits connected in parallel or by transient currents.

•Verify operation on a known source prior to measuring hazardous

voltages (voltages above 30 V ac rms, 42 V ac peak and 60 V dc).

•Do not use the 9062 with any of the parts removed.

•Do not use the 9062 around explosive gas, vapor, or dust.

•Disconnect the test leads from power sources and the 9062 before

changing the battery.

•Do not use the 9062 in a wet environment.

Motor & Phase Rotation Indicator

Symbols

The following symbols appear on the 9062 or in this manual.

Table 1. Symbols

YRisk of electric shock JEarth

WRisk of Danger. Important information.

See manual. DAC or DC

XHazardous voltage. v= Recycling information

TEquipment protected by double or

reinforced Insulation PConforms to EU directives.

Battery CAT III

OVERVOLTAGE (Installation)

CATEGORY III, Pollution Degree

2 per IEC1010-1 refers to the level

of Impulse Withstand Voltage

protection provided. Equipment of

OVERVOLTAGE CATEGORY III

is equipment in fixed installations

(e.g., electricity meter and primary

over-current protection equipment.

9062

Users Manual

Elements of the 9062

Indicators, buttons, and jacks are shown in Figure 1.

ON/OFF button

ON/OFF indicator

Test lead input jack

L1, L2, L3 Indicators

Clockwise Rotation

LCD Indicator

Counter-Clockwise Rotation

LCD Indicator

Orientation Symbol

bby03f.eps

Figure 1. The 9062 Motor and Phase Rotation Indicator

Tabla de contenidos

Otros manuales de Instrumento de medición de Fluke

Fluke

Fluke ScopeMeter 125 Manual de usuario

Fluke

Fluke MICROSCANNER Manual de usuario

Fluke

Fluke VT305 Manual de usuario

Fluke

Fluke ScopeMeter 123B Manual de usuario

Fluke

Fluke 96000 Series Manual de usuario

Fluke

Fluke 317 Manual de usuario

Fluke

Fluke 5790A Manual de usuario

Fluke

Fluke 5790B Manual de usuario

Fluke

Fluke SONOCHEK Manual de usuario

Fluke

Fluke i800 Manual de usuario

Fluke

Fluke OptiView FiberInspector OPV-FT600 Manual de usuario

Fluke

Fluke 279 FC Manual de usuario

Fluke

Fluke NORMA 6003 Manual de usuario

Fluke

Fluke i400s Manual de uso y cuidado

Fluke

Fluke 725 Manual de usuario

Fluke

Fluke 772 Manual de usuario

Fluke

Fluke Cable Analyzer DTX-ELT Manual de usuario

Fluke

Fluke 434-II Guía de configuración

Fluke

Fluke 374 Manual de usuario

Fluke

Fluke 1773 Manual de uso y cuidado

Fluke

Fluke 301A Manual de uso y cuidado

Fluke

Fluke 85RF II Manual de usuario

Fluke

Fluke 414D Manual de usuario

Fluke

Fluke 771 Manual de usuario

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario