Flexitron webdyn MTX-StarWater Manual de usuario
MTX-StarWater App
Software User Manual V1.3
www.webdyn.com
contact@webdyn.com | webdyn.com
V1.3 subject to changes | Webdyn © by Flexitron Group
2
Index
MTX-StarWater App .......................................................................................................... 3
1. Introduction........................................................................................................................................... 3
2. Material Needed ................................................................................................................................... 3
3. Installation ............................................................................................................................................ 4
4. Short User Manual................................................................................................................................ 6
5. Pulses .................................................................................................................................................... 14
6. Form Export........................................................................................................................................... 15
7. Controlled Shutdown of the MTX-StarWater........................................................................................ 16
8. Document Revisions............................................................................................................................. 17
Sales Contact ................................................................................................................... 18
contact@webdyn.com | webdyn.com
V1.3 subject to changes | Webdyn © by Flexitron Group
3
MTX-StarWater App
1. Introduction
This guide aims to explain the StarWater App utility.
StarWater App is an application developed for Windows that contains a simple and friendly graphical
interface: it allows reading and writing conguration parameters of the MTX-StarWater family devices.
2. Material Needed
• Tool “MTX-StarDebug cable” (code: 000199810001).
This cable connects to the DEBUG connector of the MTX-StarWater through the provided
external converter.
• 2.54mm pitch jumper (included inside the MTX-StarWater)
The jumper is connected to the JUMPER BOOT to be able to start the equipment in BOOT mode.
• Magnet to wake up the team.
If a magnet is not available, the SW1 button is accessible right next to the Reed magnetic
sensor.
Power supply Debug port
Jumper LEDs
Jumper BOOT
contact@webdyn.com | webdyn.com
V1.3 subject to changes | Webdyn © by Flexitron Group
4
Reed sensor
and switch
3. Installation
Run the following le to start the installation process on a Windows computer. This le is about 700 KB
in size.
contact@webdyn.com | webdyn.com
V1.3 subject to changes | Webdyn © by Flexitron Group
5
Select the folder where you want to place the program, typically C:\.
contact@webdyn.com | webdyn.com
V1.3 subject to changes | Webdyn © by Flexitron Group
6
When the installation has been successfully completed, a desktop shortcut is created. Run the shortcut
to start the StarWaterApp application.
4. Short User Manual
Open the enclosure of the MTX-StarWater equipment and connect the JUMPER BOOT.
Then connect the MTX-StarDebug cable to the PC serial port, and the DEBUG connector.
Select COM serial port. Open it: by default, the speed is always 115200 Baud.
contact@webdyn.com | webdyn.com
V1.3 subject to changes | Webdyn © by Flexitron Group
7
IMPORTANT: with the JUMPER BOOT inserted, now disconnect the battery cable, and reconnect it. You
only need to do it the rst time. Press the SW1 button (or activate the magnet) to turn the equipment on
again. In this way, we always make sure to start the MTX-StarWater in DEBUG mode.
On the console, we will see that the MTX-StarWater has started in BOOT mode when we see this message:
The next step is to enter the User LOGIN (by default: 0000): it must return OK as an answer; then, the
application will automatically read all the internal data of the MTX-StarWater, and it will show it through
the graphic interface.
The LOGIN is a parameter that is dened and recorded during the manufacturing of the MTX-StarWater.
It can be dened according to each project, please consult it with our commercial team.
contact@webdyn.com | webdyn.com
V1.3 subject to changes | Webdyn © by Flexitron Group
8
The Application consists of two windows: “MAIN” and “WINDOWS”.
MAIN WINDOW
In the MAIN window we can read and/or write conguration parameters of the MODEM and the Cervello
Stem network, as well as check the features of the MTX-StarWater unit.
MODEM
• TECHNOLOGY: connection technology.
contact@webdyn.com | webdyn.com
V1.3 subject to changes | Webdyn © by Flexitron Group
9
• SCAN_ORDER: order of priority, connection by technology.
From left to right, from highest to lowest priority.
• BAND: radio frequency bands in GSM, LTE and NB (NBIoT) technologies.
By double clicking with the mouse on the text box, a help menu will be displayed with some examples on
how to edit this text eld.
contact@webdyn.com | webdyn.com
V1.3 subject to changes | Webdyn © by Flexitron Group
10
By pressing the read button (RD) we can see the congured parameters of the MODEM, which come by
default from the factory.
We can edit any of these parameters in the text box or selection tab, and by pressing the write button
(WR) we can load the new conguration of the parameters (APN, USER, PASSWORD, DNS1, DNS2). Some
of these factory default parameters are blank.
(APN, USER, PASSWORD, DNS1, DNS2) are parameters that are dened and recorded during the
manufacturing of the MTX-StarWater. It can be dened according to each project, please consult it with
our sales team.
NOTE: When pressing WR, the TECHNOLOGY, SCAN_ORDER and BAND parameters are saved both in
EEPROM memory (conguration values) and in the MODEM itself (immediate effect).
In reading (RD) it will only show us the values that the MODEM has at that moment.
PLATFORM
This subgroup refers to the Cervello Stem platform or any other. Likewise, we can read and write by
editing in the text boxes.
Otros manuales para webdyn MTX-StarWater
2
Tabla de contenidos
Otros manuales de Instrumento de medición de Flexitron
Flexitron
Flexitron webdyn MTX-StarEnergy-E Manual de usuario
Flexitron
Flexitron webdyn MTX-StarWater Manual de usuario
Flexitron
Flexitron MTX-StarSensor Manual de usuario
Flexitron
Flexitron TAXITRONIC TX80 Urba Manual de usuario
Flexitron
Flexitron TAXITRONIC TX80 Urba Manual de usuario
Flexitron
Flexitron TAXITRONIC TX80 Urba Manual de usuario
Manuales populares de Instrumento de medición de otras marcas
Endress+Hauser
Endress+Hauser Proline Promag 50 Especificaciones técnicas
Siemens
Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas
KLINGER
KLINGER CMF V Series Manual de usuario
EXFO
EXFO FTB-2 Manual de operación y mantenimiento
Keysight
Keysight M8290A Manual de usuario
ADTEK
ADTEK MW-5 Manual de usuario