FIC P4MA PRO 533 Manual de usuario

FIC Mainboard

User’s Manual

FIC P4MA PRO 533

Version 1.00 - April, 2003

P/N

reproduced or transmitted in any form without express written authorization

from FIC.

Trademarks

All trademarks are the property of their respective holders.

Data protection

All data should be backed-up prior to the installation of any drive unit or

storage peripheral. FIC will not be responsible for any loss of data resulting

from the use, disuse or misuse of this or any other FIC product.

No Warranty

FIC has made every effort to ensure the accuracy of the content of this manual.

However, it is possible that it may contain technical inaccuracies or

typographical or other errors. FIC will assume no liability for any inaccuracy

found in this publication, nor for damages, direct, indirect, incidental,

consequential or otherwise, that may result from such an inaccuracy, including

without limitation loss of data or profits.

FIC provides this manual “as is”, and does not issue a warranty of any kind,

express or implied, including without limitation implied warranties of

merchantability or fitness for a particular purpose.

The information provided in this manual is subject to change without notice.

FIC reserves the right to alter product designs, layouts or drivers without

notification.

FCC-B Radio Frequency Interference Statement

This equipment has been tested and found to comply with the limits for a class

B digital device, pursuant to part 15 of the FCC rules. These limits are designed

to provide reasonable protection against harmful interference when the equipment

is operated in a commercial environment. This equipment generates, uses

and can radiate radio frequency energy and, if not installed and used in accordance

with the instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is likely to

cause harmful interference, in which case the user will be required to correct

the interference at his own expense.

Notice 1

The changes or modifications not expressly approved by the party responsible

for compliance could void the user’s authority to operate the equipment.

Notice 2

Shielded interface cables and A.C. power cord, if any, must be used in order to

comply with the emission limits.

iii

TRADEMARKS

All trademarks used in this manual are the property of their respective owners.

Intel and Pentium are registered trademarks of Intel Corporation.

PS/2 and OS/2 are registered trademarks of IBM Corporation.

Windows 95/98/98SE/ME/2000/XP and Windows NT are registered trademarks

of Microsoft.

Netware is a registered trademark of Novell.

Award is a registered trademark of Award Software Inc.

NOTE

1. Always read the safety instructions carefully.

2. Keep this User’s Manual for future reference.

3. Keep this equipment away from humidity.

4. Lay this equipment on a reliable flat surface before setting it up.

5. The openings on the enclosure are for air convection and protect the

equipment from overheating. DO NOT COVER THE OPENINGS.

6. Make sure the voltage of the power source and adjust properly 110/220V

before connecting the equipment to the power inlet.

7. Place the power cord such a way that people cannot step on it. Do not

place anything over the power cord.

8. Always Unplug the Power Cord before inserting any add-on card or module.

9. All cautions and warnings on the equipment should be noted.

10. Never pour any liquid into the opening. Doing so could cause damage or

electrical shock.

11. If any of the following situations arises, get the equipment checked by a

service personnel:

* The power cord or plug is damaged

* Liquid has penetrated into the equipment

* The equipment has been exposed to moisture

* The equipment does not work well or does not work according to

the User’s Manual.

* The equipment has dropped or damaged

* The equipment has been visably damaged

12. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT UNCONDITIONED,

STORAGE TEMPERATURE ABOVE 600 C (1400F), IT MAY

DAMAGE THE EQUIPMENT.

Box Contents

z1 x FIC Mainboard

z1 x User’s manual

z1 x Floppy ribbon cable

z1 x ATA-66/100/133 IDE ribbon cable

z1 x 2 Port USB 2.0 Module

z1 x Driver Utilities CD

vii

viii

Specifications

The FIC P4MA PRO 533 mainboard is based

around the FIC ProSavageDDR P4M266A chipset,

which brings support for high-performance DDR266

SDRAM to the Intel® Pentium® 4 platform. It is a high

performance, cost-effective and energy efficient SMA

chipset for the desktop PC. FIC’s advanced V-Link

controller brings optimal system efficiency by effectively

doubling bandwidth between the chipset’s north

and south bridges. P4M266A integrates S3 Graphics’

128-bit ProSavage8 graphics accelerator into a single

chip, providing ideal solution for the consumer and

entry level professionals.

This chapter includes the following sections:

1-1

CPU

• Supports Intel® Pentium® 4 Willamette/Northwood and Celeron® processors

in the 478 pin package

• Supports 1.6GHz, 1.7GHz, 1.8GHz, 1.9GHz, 2GHz, 2.2GHz and upwards

Chipset

• FIC P4M266A/VT8235 chipset

- Supports Intel® Pentium® 4 and Celeron® processors with 533/400 MHz

(133/100 MHz QDR) CPU Front Side Bus (FSB)

- Integrated ProSavage8 AGP Graphics

- External 4x AGP Bus

- High Bandwidth V-Link Client controller

- Integrated Hardware Sound Blaster/Direct Sound 6 channel AC’97

audio

- Ultra DMA 66/100/133 master mode PCI EIDE controller

- ACPI 1.0B and APM 1.2 compliant

Main Memory

• 2 x 184-pin DDR DIMM sockets

• Supports up to 2GB of 2.5v DDR SDRAM (PC2100/PC1600)

Slots

• 1 x AGP (Accelerated Graphics Port) 4X slot

• 3 x PCI 2.2 32-bit PCI bus slots (supports 3.3v/5v PCI bus interface)

• 1 x CNR (Communication Network Riser) slot

Onboard IDE

• Integrated IDE controller provides IDE HDD/CD-ROM with PIO, Bus Master

and Ultra DMA 66/100/133 operation modes

• Can connect up to 2 channel for 4 IDE devices

Onboard Floppy

• 1 x FDD Connector

Onboard LAN

• FIC VT6103 10/100 Base-T Ethernet PHY

Onboard Audio

• FIC VT1616 6 channel AC'97 Codec

1-2

Tabla de contenidos

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Gigabyte

Gigabyte GA-9IVDT Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario