Fermax VIDEO DIGITAL COLOR KIT Manual de usuario
Pag 24
Congratulations for buying a quality product. FERMAX
ELECTRONICA S.A.E. manufactures and sells its well known
prestigious equipment, designed to the most technologic and
aesthetic requirements. The components of this KIT have been
designed by Ramón Benedito, National Spanish Design Award
winner, and developed by FERMAX ELECTRÓNICA S.A.E.
We hope you will have many years of service from it.
If you wish further information about FERMAX, or make
any sugestion, contact us in the web (http:\\www.fermax.es).
ENGLISH
Pag 25
VIDEO DIGITAL COLOR KIT manual
INDEX
INTRODUCTION ................................................................................................ 26
THE CITYMAX COLOUR MONITOR ................................................................. 27
THE OUTDOOR PANEL .................................................................................... 27
MONITOR INSTALLATION ................................................................................ 28
OUTDOOR PANEL INSTALLATION .................................................................. 29
POWER SUPPLY INSTALLATION..................................................................... 31
OUTDOOR PANEL SETUP ................................................................................ 32
MONITOR CONFIGURATION ............................................................................ 32
OPERATION ....................................................................................................... 33
INSTALLATION DIAGRAMS .............................................................................. 34
KIT EXPANSIONS .............................................................................................. 37
How to add terminals ............................................................................. 38
How to add an Outdoor Panel ............................................................... 39
ACCESORIES..................................................................................................... 40
Extension call .......................................................................................... 41
Stair light Relay ....................................................................................... 41
Second door control ............................................................................... 42
Connection to TV set .............................................................................. 42
TROUBLESHOOTING HINTS ........................................................................... 43
TABLE OF SECTIONS ....................................................................................... 43
OUTDOOR PANELS INTERNAL WIRING ......................................................... 44
Pag 26
INTRODUCTION
The VIDEO DIGITAL COLOR KIT is an advanced Video Door Entry
professional system for simplified installation (no call wires), specially designed
to be installed in bungalows or small residential complexes. It is basically made
up of an Outdoor Panel, which is installed outside the house, and a Color
Monitor, installed inside. Moreover, the corresponding Power Supply must be
installed in an inner place.
VERY IMPORTANT NOTES:
The Power Supply should be installed on a hard
and flat surface, as inside the buiding as in the lobby,
etc... but always in inner places. It can be installed in
a DIN box for electric switches.
Before installing the VIDEO DIGITAL COLOR KIT,
install the cables needed to Monitor (or monitors),
Outdoor Panel and Power Supply, following the
installation diagram.
To install the Monitor, choose a hard and flat
surface, far away from direct heat sources (radiators,
heaters, ...) or very smoky environments (kitchens,
etc.). We advise to install the Monitor in a place
where the call could be heard all inside the house.
The Outdoor Panel is protected against humidity
and atmosferical agents. In adverse conditions with
permanently hard rain or salty environment, it is
recommended to install the Panel with a hood or under
shelter. Strong light coming straight into the camera
(against the light) will produce contrast and/or
brightness losses.
Pag 27
VIDEO DIGITAL COLOR KIT manual
FLAT MONITOR
HIGH RESOLUTION
2
1
1
2
HIGH RESOLUTION
COLOR CAMERA
Only in installations withAUXILIARY COLOR CAMERA
KIT or ADDITIONAL COLOR VIDEO PANEL (optional).
*
*
THE CITYMAX MONITOR
THE OUTDOOR PANEL
AMPLIFIER
mesh
Terminals for
CONNECTION
DOOR RELEASE
push button
2nd CAMERA
connection
BRIGHTNESS
control
COLOR
control
ON/OFF
switch
AUTO SWITCH-ON
push button
STAIRS LIGHT
push button
COLOR
CAMERA
module
CALL
Push buttons
CONFIGURATION
jumpers
Volume for
MONITOR
Volume for
OUTDOOR PANEL
PUSHBUTTON
connector
Pag 28
3.Once the wires are connected, plug in
the connector and place the Monitor as
shown above: 1 - 2 - 3 .
90º
FLAT MONITOR
HIGH RESOLUTION
2
1
FLAT MONITOR
HIGH RESOLUTION
2
1
2
1
3
4.To unhook the Monitor, insert the screw-
driver in the notch , turn it a few degrees
and slide up the Monitor.
Once the equipment is fully installed, the Monitor will need to be programmed
in order to assign it a call pushbutton. Follow the set up sequence shown in
page 32.
90º
1
2
3
1.60m
FROM THE
FLOOR
1.Use a plain screw-driver to separate the
base from the Monitor. Put it in, rotate
and slide the Monitor up.
2.Install the Monitor on a hard and flat
surface. Mark and drill the wall at the
holes in the base.
MONITOR INSTALLATION
The CityMax monitors allow a quick and easy installation, without neccesity
of doing any kind of building-work. Do not remove the screen protection film
until the Monitor is completely installed.
Pag 29
VIDEO DIGITAL COLOR KIT manual
1.7m
1.Before embedding the box, break the
flange where the cables will be passed
through.
2.Place the embedding box at the desired
height (1.7m aprox.). Make sure that the
box is totally flush with the wall.
OUTDOOR PANEL INSTALLATION
Follow the recommendations shown in this chapter to install the Outdoor
Panel correctly. Do not forget to remove the protective plastic film in the front
of the camera once the installation is finished.
3.Place the waterproof tapes supplied with
the KIT.
4.Use the hinges to connect the wires and
handle the Panel comfortably.
Pag 30
+18V 1.5A
50-60 H. 50VA MAX.
12V 1A
FUENTE ALIMENTACION
KIT DIGITAL
MADE IN SPAIN
+18V 1.5A
50-60 H. 50VA MAX.
12V 1A
FUENTE ALIMENTACION
KIT DIGITAL
MADE IN SPAIN
POWER SUPPLY INSTALLATION
Finally, the Power Supply must be placed in a place dry and safe from the
weather. Its DIN 6 format allows you to install it in any type box or directly on
the wall by using the wallplugs and screws supplied.
1.Drill 2 holes in the wall, place the
wallplugs and fasten the screws, fixing
the Power Supply to the wall.
2.The Power Supply can be fitted on a
DIN rail inside a box pressing it as shown
in figure.
MARIA
LORCA
HIGH RESOLUTION
COLOUR TELECAMERA
6.Close the Panel and fasten the screws
with the allen key supplied. Place the
covers to finish the installation.
5.Push up the houvre behind nameplate
the louvre and place the label. You can
use the labels supplied with the Outdoor
Panel.
Pag 31
VIDEO DIGITAL COLOR KIT manual
+18V 1.5A
50-60 H. 50VA MAX.
12V 1A
FUENTE ALIMENTACION
KIT DIGITAL
MADE IN SPAIN
FUENTE ALIMENTACION
KIT DIGITAL
220 - 240 V
MADE IN SPAIN
+ - +
3.The Power Supply can be unmounted
from the DIN rail by levering at the flange
with a flat screw-driver.
NOTE:
The Power Supply must be installed in a place dry and safe from
inclemency of weather. It is advisable to install it protected through a
thermo-magnetic circuit breaker at the main input.
4.Plug-in the wires in the corresponding
terminals following the installation
diagrams attached.
ING
* The jumper JP1 must be always
connected, except when having 2
Outdoor Panels, in which case the
jumper in one of them will be removed
(secondary).
* Select the language of the door open
message by means of JP2: english
(ING), french (FRA), spanish (ESP) and
german (ALE).
OUTDOOR PANEL SET UP
The Outdoor Panel must be set up depending on the type of installation,
using the jumpers in the rear side of the amplifier.
ESP
FRA
ALE
JP2
JP1
Pag 32
OPERATION
Once the VIDEO DIGITAL COLOR KIT has been installed, it is advisable to
check all its features.
Call
* When pressing the call pushbutton in the Outdoor Panel it produces an
electronic sound in the Monitor, which is activated to show the visitor in
the screen. The image must be clear, day and night, because of the
camera's lighting. You can watch the visitors without letting them know if
the apartment is inhabited.
MONITOR CONFIGURATION
Before programming, the system must be fully wired, the handset on hook
and the Monitor connected as shown below.
HIGH RESOLUTION
COLOUR TELECAMERA
J1
PRG
J1
PRG
1.Put the jumper J1 to the
PRG position. A
confirmation sound will
be heard.
2.Press the button which
will identify the Monitor.
Once again confirmation
is generated.
3.Put back the jumper
back to its original
position and hang up the
Monitor.
Time between steps 1 and 2 must not be longer than 2 minutes. In case this
would occur, put back the jumper to its original position and restart the sequence.
Pag 33
VIDEO DIGITAL COLOR KIT manual
NOTE:
* For normal use of the Monitor, the switch must be in the ON
position. When the Monitor is not going to be used for a long time,
switch off the monitor using this switch.
* In installations with additional terminals (monitors and/or telephones),
the call activates all the terminals (call tone and video). When picking
up one of the handsets the communication channel with the Outdoor
Panel is opened, and the rest of terminals are blocked. From the blocked
monitors, the only function available will be the auto switch-on
1
.
* The spoken message when releasing the lock is selectable from 4
different languages (see page 31). If it is not needed, the message may
be cancelled.
* Picking up the handset you can hold a conversation with the visitor up to
a maximum of 90 seconds, or until you hang up the handset.
* Pressing the button you will release the door lock, giving access to
the visitor. When the door opening is produced, a spoken message can
be heard: "The door is opened. Please, close the door behind you.".
Reconnect a call
* At any time, you can re-stablish communication with the Outdoor Panel
by pressing
1
and picking up the handset.
Auto switch-on
* You can also activate the Monitor at will by pressing the auto switch-on
1
, obtaining the image from the Outdoor Panel. This feature allows
you to control the area covered by the camera whenever you need
(vigilance and watching functions). The Monitor will switch-off
automatically after 30 seconds.
If the system does not work correctly check out the chapter TROUBLE
SHOOTING HINTS in page 43 of this manual.
Tabla de contenidos
Otros manuales de Sistema de intercomunicación de Fermax
Fermax
Fermax Olympo Basic Series Manual de usuario
Fermax
Fermax DUOX VIDEO MARINE KIT 1-2 L Manual de usuario
Fermax
Fermax Kit City iLoft KT-51 Manual de usuario
Fermax
Fermax LOFT VISION 5 Manual de usuario
Fermax
Fermax DUOX iLOFT Instrucciones de montaje
Fermax
Fermax 1151 Manual de usuario
Fermax
Fermax VDS Manual de usuario
Fermax
Fermax DUOX CITYLINE VEO Manual de usuario
Fermax
Fermax Minicentral MDS Digital Instrucciones de montaje
Fermax
Fermax Way-Fi Guía del usuario
Fermax
Fermax DETECTA-6 Manual de usuario
Fermax
Fermax VEO XS DUOX Manual de usuario
Fermax
Fermax VDS Guía de configuración
Fermax
Fermax Way-Fi Manual de usuario
Fermax
Fermax LOFT BUS2 Manual de usuario
Fermax
Fermax 5207 Guía del usuario
Fermax
Fermax DUOX VIDEO MARINE KIT 1-2 L Manual de usuario
Fermax
Fermax CITYMAX BASIC 4+N Manual de usuario
Fermax
Fermax SKYLINE 4+N KIT Guía del usuario
Fermax
Fermax iloft Manual de usuario
