FeiYu Tech A2000 Manual de usuario
3-Axis Gimbal for Mirrorless and DSLR Cameras
Guilin Feiyu Technology Incorporated Company
V 2.1ENUser Manual
1
[1] Tilting axis
[2] Cross arm
[3] Rolling lock screw
[4] Rolling axis
[5] Vertical arm
[6] Status indicator
[7] Joystick
[8] Function button
[9] Shutter button
[10] Shutter cable socket
[11] Sliding arm
[12] Quick plate
[13] Adjustment skateboard
[14] Adapter(Clamping plate)
[15] Panning lock screw
[16] Panning axis
[17] Socket connector
[18] Tilting lock screw
[19] Camera support frame screw
[20] Camera support frame
[21] Thumb screw
[22] Retaining ring
[23] Trigger button
[24] Charging indicator
[25] USB interface
[26] Handle
1. Product Overview
[1]
[4]
[3]
[2]
[18]
[19]
[14] [13] [12] [21]
[23]
[25] [24]
[15]
[16]
[17]
[9] [8]
[7] [6]
[22]
[26]
[5]
[11]
[10]
[21] [20]
2
Included Accessories
After installation, please
tighten the retaining ring
!
USB cable 4 Batteries
(type: 18650)
Shutter release
cable for Sony cameras
(3.5 audio to multi)
Smart charger Quick plate
Thumb screw
Camera support
frame screw
Camera support
frame
Cold shoe
mount
Double-Hand Foldable Set (optional)
Retaining ring
Retaining ring
1/4-20
inch screw
（double-hand foldable set）
Single Handle
Advanced Accessories
Installation Way
Tripod
Shutter release cable
for Panasonic cameras
(3.5 mm to multi port)
Shutter release cable
for Canon cameras
（RS-80N3）
3
2
(1)Remove the quick plate from the gimbal.
Insert the provided 1/4-20 screw into a mounting
hole on quick plate.For a front-heavy camera(i.e.
bigger,heaver lens),select a mounting hole closer
to the back end of the quick plate to ensure proper
balance.
1
2. User Guide
Attention: please read the following instructions before turning on the power on the gimbal
Insert the Batteries
Remove the handle, insert 2 pcs 18650 batteries
and tighten the handle.
Prior to use, please be sure to fully charge
the batteries.
Attach Camera
18650
18650
*The screw is screwed into the threaded
holes on the quick plate.
Thumb screw
4
Balance Adjustment
After installing the camera, press and hold the anti-column, place the quick plate with mounted which
the camera is mounted on the clamping plate, and tighten the screws.
（2）
3
!
Anti-column
Thumb
screw
Adjust the centre of gravity balance of the three axis (see section 9. Balance Adjustment for details)
then turn on the gimbal.
Note: centre of gravity imbalance can lead to stable performance degradation, and
may not balance the camera.
5
3. Modes / Functions
Power�on： press and hold the function button until the green light on and you hear the tone.
Power�o�：
press and hold the function button until the red light changes from quick flashing to constant
and you hear the tone.
4
Trigger button
Lock
Function button
Two taps
Two taps
One tap
Function
Three taps
Reset
Long press
Return to panning mode, tilting and rolling to return to initial level
Explanation
Function Explanation
Panning Mode
Panning and Tilting Mode Under panning and tilting mode, control the rolling axis by moving the
joystick to the left or right, and the control angle is - 30 °~+ 30°
Rotate horizontal 180° Make the camera lens rotate 180 °(the current mode of work does not
change)
Default mode
Operating Instructions
In the panning mode or panning and tilting mode, press and hold lock
shortcuts to enter the lock mode, release to return before mode
Four taps Both the panning and tilting directions can be rotated
Autorotation Mode
Five taps After the initialization succeeds or fails, you can click the function button
to wake up the gimbal
Initialization
Power On/Power Off
6
In case of low battery the indicator light will flash red three times
every 5 seconds. Please charge gimbal or replace batteries.
The current mode of the gimbal can be identified by
the indicator status.
LED indicator status Mode / status
Blue light flashes once
Blue light flashes twice
Panning Mode
Panning and Tilting Mode
Lock mode / initialize the gimbalBlue light constant on
Blue light keeps flashing Initialization failure / malfunction
Low battery Red light flashes three times
Red light keeps flashing Entering power off
!
Explanation of joystick control
Function
Button
Shutter
Button
Up
Indicator
Left
Right
Down
Panning Mode (default mode )
Panning and Tilting Mode
Lock Mode
Reset
The orientation of the camera is fixed.
Return to panning mode, tilting and rolling to return to initial level.
Tilting and rolling direction are fixed, and the camera lens moves according to the handle movement.
Working Modes
The rolling direction is fixed, and the camera lens moves according to the hand movement.
Explanation of LED Indicator Status
7
Autorotation Mode
With camera, delay photography function can be used to achieve mobile delay photography.
1. The speed setting is made by Feiyu ON App.
Note: both the panning and tilting directions can be rotated.
Manual Lock
Hold the camera and change
its angle in tilting axis direction.
Keep this position for half
a second, the current angle
will be locked manually.
2
1
Pull to the required angle and hold for half a second to lock in that position. (The tilting axis and panning axis in lock
mode can be manual. The tilting axis can be manually locked in the panning mode.) Take the tilting axis as an
example:
8
hours
/ turn
4
hours
/ turn
1
hour
/ turn
(default)
30
minutes
/ turn
15
minutes
/ turn
2
minutes
/ turn
4
minutes
/ turn
8
minutes
/ turn
30
seconds
/ turn
24
seconds
/ turn
18
seconds
/ turn
12
seconds
/ turn
1
minute
/ turn
a2000 Rotate Speed
8
5.The gimbal will go to the start position and
start the autorotation function.
4. Pull the gimbal (which can be rotated more
than one turn) to the rotation path you want
to set, and then click the function button to
record the end position.
3. Set the gimbal start rotation position: pull
the tilting axis or panning axis to the start
position by hand,click the function button to
record the start position.
2.Four taps on function button, gimbal will
enter the autorotation mode .
Exit operations：
1.Click the function button to exit the autorotation mode during automatic rotation.
2.Two taps the trigger button to exit the autorotation mode during setting the automatic rotation.
Function
Button
Tilting
Panning
Function
Button
Tilting
Panning
Function
Button
9
Input：5V/1A
（equipped by user）
Explanation of Charging Indicator Status
LED status Mode / status
Blue light on,
red light off
Blue light and
red light are
flashing
(If the two batteries voltage difference between the
larger, the process takes a long time)
Stop charging
The voltage of two batteries
balance ajustment
Blue light and
red light charging
Indicator
Charging indicator
7
Photograph
Manual photograph: click the shutter
button to focus, click again within 3s to
take pictures.If there is no operation within
3 seconds , the focus state is cleared.
Automatic continuous shooting: shutter
button long press 3s or more, gimbal "drop"
sound and enter the automatic continuous
shooting mode, the default 5s shot once.
One tap the shutter button to exit the
automatic continuous shooting mode.(you
can enter the Feiyu On App to setting the
photographic interval time.)
Micro USB
The shutter button can take pictures via the shutter release cable.
4. Charging
Tabla de contenidos
Otros manuales de Accesorios para cámaras de FeiYu Tech
FeiYu Tech
FeiYu Tech SCORP PRO Manual de usuario
FeiYu Tech
FeiYu Tech FY-G4 GS Manual de usuario
FeiYu Tech
FeiYu Tech SCORP 2 Manual de usuario
FeiYu Tech
FeiYu Tech G5 Manual de usuario
FeiYu Tech
FeiYu Tech Vimble 2A Guía de instalación
FeiYu Tech
FeiYu Tech AK2000C Manual de usuario
FeiYu Tech
FeiYu Tech SCORP Mini Manual de usuario
FeiYu Tech
FeiYu Tech SPG Manual de usuario
FeiYu Tech
FeiYu Tech a1000 Manual de usuario
FeiYu Tech
FeiYu Tech G4S Manual de usuario
FeiYu Tech
FeiYu Tech SCORP-C Manual de usuario
FeiYu Tech
FeiYu Tech G6 Manual de usuario
FeiYu Tech
FeiYu Tech VIMBLE 3 Manual de usuario
FeiYu Tech
FeiYu Tech G360 Manual de usuario
FeiYu Tech
FeiYu Tech FY-G4 GS Manual
FeiYu Tech
FeiYu Tech G3Ultra Manual
FeiYu Tech
FeiYu Tech VLOG Pocket Manual de usuario
FeiYu Tech
FeiYu Tech AK Series Manual de usuario
FeiYu Tech
FeiYu Tech G6 Manual de usuario
FeiYu Tech
FeiYu Tech MG Manual de usuario
