Fein KBM 32Q Manual de usuario

Sahre/MVK 03/07

retains all powers of disposition such as copying and right of transfer.

FRT: KBM 32 Q

Starting page

KBM 32 Q

Sahre/MVK 03/07

retains all powers of disposition such as copying and right of transfer.

FRT: KBM 32 Q

Contents

1. Technical data

2. Maintenance

3. General inspection

4. Disassembly

5. Assembly

6. Tools

7. Lubricants

8. Modifications

Spare design and parts list available on the Internet (www.fein.com)

Sahre/MVK 03/07

retains all powers of disposition such as copying and right of transfer.

FRT: KBM 32 Q

Order reference 7 270 27

Model KBM 32 Q

Power consumption Watt 700

Power output Watt 650

Speed at full load 1/min 440

Type of current 1 ~

Safety class 1

Cable length with plug m 4

Weight kg 10

Drill - Ø Steel max.

Core drill mm 12-32

Twist drill (with drill chuck) mm 13

Tapping drill M 12

Chuck QuickIN

Magnetic holding force N 9000

Height (drill jigs) mm 373

Cam (adjustable) mm 135-260

Magnetic foot measurement mm 160 x 80 x 45

1. Technical data

Sahre/MVK 03/07

retains all powers of disposition such as copying and right of transfer.

FRT: KBM 32 Q

2. Maintenance

Check power cable for damage

Vent motor using dry compressed air

Check carbon brushes

General functional control

Carbon brush replacement:

The drill motor has carbon brushes with automatic switch-off.

The replacement should be done by an electrician, prior in

an authorised FEIN - workshop.

During the insertion of the new carbon brush observe free movement in the carbon brush holder.

New carbon brushes have to run in for 15 min in no load speed.

Only use original Fein - carbon brushes and Fein - replacement parts



Sahre/MVK 03/07

retains all powers of disposition such as copying and right of transfer.

FRT: KBM 32 Q

3. General inspection

3.1. General functional test

3.2. Test data

3.3. Testing devices and aids

3.4. Connection plan

3.5. Security inspection after completed repair

For a detailed troubleshooting and inspection possibilities

see Excel - file at the end of the presentation !



Sahre/MVK 03/07

retains all powers of disposition such as copying and right of transfer.

FRT: KBM 32 Q

3.1 General functional test

Self-start lock and magnetic foot:

Switch on the main switch (magnet) and motor switch, then connect the machine to the main power

- The motor may not start

- Magnetic foot attaches

- Check power input (0.30 A)

Switch off motor switch

- Magnetic foot remains on

- Power input has to sink to half the amount (0.15A)

Motor test:

Turn on and load motor

- Measure idle speed

- Speed is adjusted when loaded

- at approx. 1100 Watt strong speed reduction

Overload cut-out:

Heavily load or block motor

- after 10 - 16 sec. automatic cut-out ( overload protection )

Sahre/MVK 03/07

retains all powers of disposition such as copying and right of transfer.

FRT: KBM 32 Q

3.2. Test data

Nominal voltage 220 - 240 V 110 V / 120 V

Test voltage / 2 % Nominal voltage

No-load current / 10 % (1,44-1,76A) 1,6 A 3 A

No-load speed / 10% (486 - 594 U/min) 540 U/min

Main switch on

Voltage at X7,X8 10% (90-110V/DC) 100 V / DC 50 V / DC

Current consumption 0,15 A 0,25 A

Main switch on, motor on

Voltage at X7,X8 10% (180-220V/DC) 200 V / DC 100 V / DC

Current consumption 0,30 A 0,60 A

Resistance of magnetic base 5% bei 25°C (627-693 Ohm) 660 Ohm 160 Ohm

Minimum drilling force min. 2700 N

Test voltage on motor without electronics 180 V / AC 86 V / AC

Sahre/MVK 03/07

retains all powers of disposition such as copying and right of transfer.

FRT: KBM 32 Q

3.3. Testing devices and aids

Multimetre for effective measuring (voltage, current, resistance)

Speed gauge

Force measurement tin for measurement of pressing force up to approx. 5000 N

Smoothed steel plate ( ST 37 - approx. 500x250x25 mm )

Adjustable isolating transformer (inspection motor without electronics with 145 V)

Sahre/MVK 03/07

retains all powers of disposition such as copying and right of transfer.

FRT: KBM 32 Q

3.4. Connection plan

Sahre/MVK 03/07

retains all powers of disposition such as copying and right of transfer.

FRT: KBM 32 Q

3.5. Security inspection after completed repair

(directly after approx. 15 min. of breaking in)

Attention!

Basis for

the security

inspection are the

specifications of the

current

DIN VDE 0701 Part 1

(Appendix "E" for

electr. tools).

Test steps

Test type

Pressing off force

1. Place KBM on smoothed steel plate (St 37).

2. Attach mains power cable to mains socket

3. Motor switch on, only then main switch on

4. Pressing off force, min 4500N (new) or min 4050N (used), measure

with force measurement tin

Self-start lock

1. Connect KBM 50Q to 230 V/50 Hz

2. Main switch and then motor switch "on"

3. If machine runs, then pull mains plug

4. Connect mains plug into the mains socket again

= Machine must not start again

protective earth

conductor test

1. Activate

Measuring points: Gear head against PE on the plug

Open circuit voltage on the measuring device: 4 V - 24 V, AC or DC

Measurment current: min. 0.2 A

Testing time: 3 sec

PE resistance: max. 0.3 Ohm with 4 m long mains power cable

Insulation

resistance

measurement

1. Activate

2. Connect L1 and N to plug

3. Main switch and motor switch "ON"

Measuring points: Gear head and screws (270) against L1/N

Testing time: 3 sec

Testing voltage: 500 V DC

Insulation resistance: min 2.0 M Ohm

High voltage test

1. Activate

2. Connect L1 and N to plug

3. Main switch and motor switch "ON"

Measuring points: Gear head and screws (270) against L1/N

Testing time: 3 sec

Testing voltage: 1000 V AC

Trip circuit: 5mA > overload relay must not respond

Otros manuales para KBM 32Q

Tabla de contenidos

Otros manuales de Perforar de Fein

Fein

Fein BOP6 Manual de usuario

Fein

Fein ABS18 Q Manual de usuario

Fein

Fein KBM 50 Q Manual de usuario

Fein

Fein DSk 658 Manual de usuario

Fein

Fein BOZ 32-4M Manual de usuario

Fein

Fein KBU 110-4 M Manual de usuario

Fein

Fein KBU 35 PQ Guía de configuración

Fein

Fein Slugger JHM USA 101 X Manual de usuario

Fein

Fein KBE 35 Series Manual de usuario

Fein

Fein ASCM14 Manual de usuario

Fein

Fein Slugger JME Holemaker III Manual de usuario

Fein

Fein KBM 65 U Manual de usuario

Fein

Fein ASCM14 Manual de usuario

Fein

Fein Handy Master ABS9 Manual de usuario

Fein

Fein ABS 9 Manual de usuario

Fein

Fein ASy 630 Manual de usuario

Fein

Fein ASz 648 d Manual de usuario

Fein

Fein ASCM 12 C Manual de usuario

Fein

Fein ASge636 Manual de usuario

Fein

Fein MBS16X Manual de usuario

Fein

Fein KBE 32 QW Manual de usuario

Fein

Fein KBE 35 (A) Guía de configuración

Fein

Fein KBC35 Manual de usuario

Fein

Fein 7 205 43 Manual de usuario

Manuales populares de Perforar de otras marcas

Makita

Makita BDF456 Manual de usuario

Black & Decker

Black & Decker LDX220 Manual de usuario

Hitachi

Hitachi DH 40MA Manual de usuario

Challenge

Challenge JO Manual de referencia técnica

Makita

Makita LXFD01 Manual de usuario

Festool

Festool T18+3 Manual de usuario

Milwaukee

Milwaukee M12 FPDX-202X Manual de usuario

EINHELL

EINHELL TE-RH 32 E Manual de usuario

Makita

Makita DHP484 Manual de usuario

Makita

Makita FD05 Manual de usuario

Bosch

Bosch PSB 530 RA Manual de usuario

Maximum

Maximum 054-1359-4 Manual de usuario

Makita

Makita HP332D Manual de usuario

Raider

Raider RDP-HD31H Manual de usuario

Bort

Bort BPM-1400x2 Manual de usuario

Black & Decker

Black & Decker 7266 Manual de usuario

KENT USA

KENT USA TRD1230 Manual de usuario

Bosch

Bosch GSB 19-2 RE Manual de usuario