Fein KBE30 Guía de configuración
KBE 30
Repair instructions
C-SC_CSSM
Version 1.0
2019-02-12
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
Page 1of 61
KBE 30
Contents
C-SC_CSSM
Version 1.0
2019-02-12
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
Page 2of 61
1. Models described
2. Technical data
3. Notes and requirements
4. Tools required
5. Lubricants and auxiliary substances required
6. Removal
7. Fitting
8. Troubleshooting
9. Connection diagram
KBE 30
1. Models described
C-SC_CSSM
Version 1.0
2019-02-12
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
Page 3of 61
These repair instructions describe how to repair the following models:
Model
Order number
KBE 30
7 270 65 .. .. .
KBE 30
2. Technical data
C-SC_CSSM
Version 1.0
2019-02-12
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
Page 4of 61
Technical data
All the technical data can be found in the operating instructions for the model.
Test data
Up-to-date test data for all models can be found on the FEIN Extranet (Customer Service → Repair Guides).
Lubricants
The lubricants and container sizes available from FEIN can be found on the FEIN Extranet
(Customer Service →Repair Guides).
Lists of spare parts
Lists of spare parts and exploded views are available online at www.fein.com
KBE 30
3. Notes and requirements
C-SC_CSSM
Version 1.0
2019-02-12
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
Page 5of 61
Please note
These instructions are only intended for persons with suitable technical training. It is assumed that the reader has mechanical and
electrical training.
Only use original FEIN spare parts.
Provisions
Please note that power tools may only be repaired, maintained and checked by a trained electrician, as improper repair can result in
serious risks to the user.
The provisions set out in DIN VDE 0701-0702 should be observed after repairs.
The relevant accident prevention regulations of the employer’s liability insurance associations are to be observed when
commissioning.
The German Equipment and Product Safety Act [ProdSG] applies for correct use.
Outside Germany, the regulations applicable in the relevant country must be observed.
KBE 30
4. Tools required
C-SC_CSSM
Version 1.0
2019-02-12
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
Page 6of 61
Standard tools
Special tools
Outer puller
Drawing-off socket cap
6 41 04 150 00 8
Bolt
20 mm in diameter
Chuck cone 19 mm
6 41 07 019 00 7
Arbor press
Chuck cone 22 mm
6 41 07 022 00 1
Open-ended spanner
Sizes 6, 14, 17, 22, 23, 24 mm
Chuck cone 37 mm
6 41 07 037 00 3
Slide hammer
Sleeve
~20 mm outer diameter
12 mm inner diameter
~20 mm outer diameter
14 mm inner diameter
25 mm outer diameter
15 mm inner diameter
27 mm outer diameter
17 mm inner diameter
28 mm outer diameter
23 mm inner diameter
35 mm outer diameter
30 mm inner diameter
26 mm outer diameter
~23 mm inner diameter
KBE 30
4. Tools required
C-SC_CSSM
Version 1.0
2019-02-12
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
Page 7of 61
Standard tools
Inner puller
Socket wrenches
2.5 mm; 3 mm; 4 mm; 5 mm; 6 mm
PH2 cross-tip screwdriver
Torx
T10
Slotted screwdriver
Plastic hammer
Side-cutting pliers
Circlip pliers
Flat-nose pliers
Ball bearing support
8 mm inner diameter
12 mm inner diameter
KBE 30
5. Lubricants and auxiliary substances required
C-SC_CSSM
Version 1.0
2019-02-12
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
Page 8of 61
Lubricants
Grease
0 40 127 0100 0
80 g
Gearbox
KBE 30
6. Removal
C-SC_CSSM
Version 1.0
2019-02-12
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
Page 9of 61
Removing the cover
1. Remove the screw (1) and take off the cover (2).
2. Take out the two terminals (3) and remove the stranded wires.
3. Remove the two screws (4).
Tools:
- Cross-tip screwdriver
- Torx T10
2
1
3
3
4
KBE 30
6. Removal
C-SC_CSSM
Version 1.0
2019-02-12
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
Page 10 of 61
Removing the cover
1. Remove the two cable ties (1).
2. Remove the cover (2).
3. Remove the screw (3).
Tools:
- Side-cutting pliers
- Torx T10
1
3
2
Otros manuales para KBE30
2
Tabla de contenidos
Otros manuales de Perforar de Fein
Fein
Fein BOP6 Manual de usuario
Fein
Fein HandyMaster ABS 18V Guía de inicio rápido
Fein
Fein DSceu638 Manual de usuario
Fein
Fein ABS 14 Guía de configuración
Fein
Fein KBM 52 U Manual de usuario
Fein
Fein ASzx 648 Manual de usuario
Fein
Fein DSk 672 Manual de usuario
Fein
Fein ASq 658 Manual de usuario
Fein
Fein ASCM 12 C Manual de usuario
Fein
Fein AGWP10 Manual de usuario
Fein
Fein DDSK 672 Manual de usuario
Fein
Fein DDSk 672 Manual de usuario
Fein
Fein HandyMaster ASB 18V Guía de inicio rápido
Fein
Fein KBH25 Manual de usuario
Fein
Fein 7 270 27 Manual de usuario
Fein
Fein ASCM12 Manual de usuario
Fein
Fein KBE 35 N24 Guía de configuración
Fein
Fein ASzx 736 Manual de usuario
Fein
Fein BOZ 32-4M Manual de usuario
Fein
Fein ASCM18QM Series Manual de usuario
