Fayat Group Bomag BVP 10/36 Instrucciones de uso
BVP 10/36 / BVP 18/45
Forward marching vibratory plate
Operating Instruction
Maintenance Instruction
Original Operating Instructions
S/N 861 834 03 3962> / S/N 861 834 04 7632> / S/N 861 834 11 1001>
© 08/2014008 062 61
www.discount-equipment.com
Go to Discount-Equipment.com to order your parts
Discount-Equipment.com is your online resource for quality parts & equipment.
Florida: 561-964-4949 Outside Florida TOLL FREE: 877-690-3101
Need parts?
Click on this link: http://www.discount-equipment.com/category/5443-parts/ and
choose one of the options to help get the right parts and equipment you are looking
for. Please have the machine model and serial number available in order to help us
get you the correct parts. If you don’t find the part on the website or on one of the
online manuals, please fill out the request form and one of our experienced staff
members will get back to you with a quote for the right part that your machine needs.
We sell worldwide for the brands: Genie, Terex, JLG, MultiQuip, Mikasa, Essick, Whiteman,
Mayco, Toro Stone, Diamond Products, Generac Magnum, Airman, Haulotte, Barreto,
Power Blanket, Nifty Lift, Atlas Copco, Chicago Pneumatic, Allmand, Miller Curber, Skyjack,
Lull, Skytrak, Tsurumi, Husquvarna Target, Stow, Wacker, Sakai, Mi-T-M, Sullair, Basic,
Dynapac, MBW, Weber, Bartell, Bennar Newman, Haulotte, Ditch Runner, Menegotti,
Morrison, Contec, Buddy, Crown, Edco, Wyco, Bomag, Laymor, EZ Trench, Bil-Jax, F.S.
Curtis, Gehl Pavers, Heli, Honda, ICS/PowerGrit, IHI, Partner, Imer, Clipper, MMD, Koshin,
Rice, CH&E, General Equipment ,Amida, Coleman, NAC, Gradall, Square Shooter, Kent,
Stanley, Tamco, Toku, Hatz, Kohler, Robin, Wisconsin, Northrock, Oztec, Toker TK, Rol-Air,
APT, Wylie, Ingersoll Rand / Doosan, Innovatech, Con X, Ammann, Mecalac, Makinex, Smith
Surface Prep,Small Line, Wanco, Yanmar
Table of contents
1 Foreword................................................................................................................................................ 5
2Technical data....................................................................................................................................... 9
3 Safety regulations............................................................................................................................... 15
4 Display and control elements............................................................................................................ 25
4.1 General notes.............................................................................................................................. 26
4.2 Description of indicators and control elements....................................................................... 27
5 Operation............................................................................................................................................. 29
5.1 General......................................................................................................................................... 30
5.2 Tests before taking into operation............................................................................................ 31
5.3 Mounting the steering bow........................................................................................................ 32
5.4 Starting the engine ..................................................................................................................... 33
5.5 Work/operation............................................................................................................................ 38
5.6 Switching on the water sprinkling systemOptional equipment ........................................................ 39
5.7 Switching the motor off.............................................................................................................. 40
5.8 Loading/transport....................................................................................................................... 41
6 Maintenance........................................................................................................................................ 43
6.1 General notes on maintenance.................................................................................................. 44
6.2 Fuels and lubricants .................................................................................................................. 46
6.3 Table of fuels and lubricants..................................................................................................... 48
6.4 Running-in instructions.............................................................................................................. 49
6.5 Maintenance table....................................................................................................................... 50
6.6 Maintenance every day............................................................................................................... 51
6.6.1 Cleaning the machine................................................................................................................ 51
6.6.2 Check the engine oil level.......................................................................................................... 51
6.6.3 Check the fuel level.................................................................................................................... 52
6.6.4 Filling the water tankOptional equipment ............................................................................................ 53
6.7 Weekly maintenance................................................................................................................... 54
6.7.1 Check, clean the air filter............................................................................................................ 54
6.8 Maintenance every month.......................................................................................................... 56
6.8.1 Clean the cooling fins and the cooling air intake openings........................................................ 56
6.9 Maintenance every 6 months..................................................................................................... 57
6.9.1 Change the engine oil ............................................................................................................... 57
6.9.2 Check, clean the spark plug, replace if necessary..................................................................... 58
6.9.3 Clean the slurry filter ................................................................................................................. 59
6.9.4 Checking the oil level in the vibrator housing............................................................................. 60
6.9.5 Checking the V-belt, tightening, replacing if necessary............................................................. 60
6.10 Annual maintenance................................................................................................................. 62
6.10.1 Check, adjust the valve clearance .......................................................................................... 62
6.10.2 Cleaning the fuel screen.......................................................................................................... 63
6.10.3 Replacing the starter rope........................................................................................................ 65
6.10.4 Change the oil in the exciter housing....................................................................................... 66
6.10.5 Check the rubber buffers ......................................................................................................... 68
6.11 As required................................................................................................................................ 69
6.11.1 Change the air filter.................................................................................................................. 69
Table of contents
BVP 10/36 / BVP 18/45
3
Go to Discount-Equipment.com to order your parts
6.11.2 Flushing the water sprinkler systemOptional equipment ................................................................... 70
6.11.3 Tightening the screws.............................................................................................................. 70
6.11.4 Engine conservation................................................................................................................. 70
7 Trouble shooting................................................................................................................................. 73
7.1 General notes.............................................................................................................................. 74
7.2 Engine problems......................................................................................................................... 75
8 Disposal............................................................................................................................................... 77
8.1 Final shut-down of machine....................................................................................................... 78
Table of contents
BVP 10/36 / BVP 18/45
4
Go to Discount-Equipment.com to order your parts
1 Foreword
Foreword
BVP 10/36 / BVP 18/45
5
Go to Discount-Equipment.com to order your parts
BOMAG manufactures machine for earth, asphalt and refuse
compaction, stabilizers/recyclers as well as milling machine
and finishers.
BOMAG’s vast experience in connection with state-of-the-art
production and testing methods, such as lifetime tests of all
important components and highest quality demands guar-
antee maximum reliability of your machine.
This manual comprises:
nSafety regulations
nOperating instructions
nmaintenance instructions
nTrouble shooting
Using these instructions will
nhelp you to become familiar with the machine.
navoid malfunctions caused by unprofessional operation.
Compliance with the maintenance instructions will
nenhance the reliability of the machine on construction sites,
nprolong the lifetime of the machine,
nreduce repair costs and downtimes.
BOMAG will not assume liability for the function of the machine
nif it is handled in a way not complying with the usual modes of
use,
nif it is used for purposes other than those mentioned in these
instructions.
No warranty claims can be lodged in case of damage resulting
from
noperating errors,
ninsufficient maintenance and
nwrong fuels and lubricants.
Please note!
This manual was written for operators and maintenance personnel
on construction sites.
These operating and maintenance instructions are part of the
machine.
You should only operate the machine after you have been
instructed and in compliance with these instructions.
Strictly observe the safety regulations.
Please observe also the guidelines of the Civil Engineering Liability
Association ”Safety Rules for the Operation of Road Rollers and
Soil Compactors” and all relevant accident prevention regulations.
For your own personal safety you should only use original
spare parts from BOMAG.
In the course of technical development we reserve the right
for technical modifications without prior notification.
These operating and maintenance instructions are also available in
other languages.
Foreword
BVP 10/36 / BVP 18/45
6
Go to Discount-Equipment.com to order your parts
Apart from that, the spare parts catalogue is available from your
BOMAG dealer against the serial number of your machine.
Your BOMAG dealer will also supply you with information about the
correct use of our machines in soil and asphalt construction.
The above notes do not constitute an extension of the warranty
and liability conditions specified in the general terms of business of
BOMAG.
We wish you successful work with your BOMAG machine.
BOMAG GmbH
Copyright by BOMAG
Please fill in
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Machine type (Fig. 1)
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Serial No. (Fig. 1 and 2)
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Engine type (Fig. 3)
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Engine No. (Fig. 3)
Supplement the above data together with the commis-
sioning protocol.
During commissioning our organisation will instruct you
in the operation and maintenance of the machine.
Please observe strictly the safety regulations and all
notes on risks and dangers!
Fig. 1
Foreword
BVP 10/36 / BVP 18/45
7
Go to Discount-Equipment.com to order your parts
Fig. 2
Fig. 3
Foreword
BVP 10/36 / BVP 18/45
8
Go to Discount-Equipment.com to order your parts
2 Technical data
Technical data
BVP 10/36 / BVP 18/45
9
Go to Discount-Equipment.com to order your parts
Fig. 4
BVP 10/36 H H1L L1W
Dimensions in mm 535 915 1115 558 360
Dimensions in inch 21.1 36.0 43.9 22.0 14.2
BVP 10/36
Weights
Operating weight (CECE) 83 kg 183 lbs
Basic weight 82 kg 181 lbs
Water sprinkling system (optional equipment) + 10 kg + 22 lbs
Transport wheels (optional equipment) + 4 kg + 9 lbs
Travel characteristics
Working speed max. 25 m/min 82 ft/min
Max. gradability (depending on soil) 30 % 30 %
Drive
Engine manufacturer Honda Honda
Type GX 120 GX 120
Cooling Air Air
Technical data
BVP 10/36 / BVP 18/45
10
Go to Discount-Equipment.com to order your parts
Otros manuales para Bomag BVP 10/36
1
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Herramientas eléctricas de Fayat Group
Fayat Group
Fayat Group BOMAG BP 12/40 Manual de usuario
Fayat Group
Fayat Group Bomag BPR 70/70 D Instrucciones de uso
Fayat Group
Fayat Group BOMAG BP 20/50 Manual de usuario
Fayat Group
Fayat Group DYNAPAC DFP7AX Manual de usuario
Fayat Group
Fayat Group BOMAG BPR 35/60 D Manual de usuario
Fayat Group
Fayat Group DYNAPAX DRP45DX Instrucciones de uso
Fayat Group
Fayat Group BOMAG BT 60/4 Manual de usuario
Fayat Group
Fayat Group BOMAG BPR 35/60 Instrucciones de uso
Fayat Group
Fayat Group Bomag BVP 10/36 Manual de usuario
Fayat Group
Fayat Group BOMAG BRP 35/60 D Instrucciones de uso
