Farmcomp Wile 65 Manual de usuario

EN Operating instructions

DE Gebrauchsanweisung

Grain Moisture meter

Getreidefeuchtemesser

Operating instructions for Wile 65

1. Box Contents........................................4

2. Technical features of the meter............4

Technical features of Wile 65 -moisture

meter:.......................................................4

3. Usage...................................................6

3.1. reparation for the measurement.....6

3.2. Taking the sample.............................6

3.3. Filling the measuring cup..................7

3.4. Measurement and functions of the

meter........................................................8

3.5. Exceptional result............................16

4. Grain properties..................................16

5. Battery................................................18

6. Warranty and the maintenance of the

meter......................................................18

Gebrauchsanweisung für den

Getreidefeuchtemesser Wile 65

1. Lieferumfang......................................20

2. Zentrale Eigenschaften......................20

3. Betrieb................................................22

3.1. Vorbereitung der Messung .............22

3.2. robenahme....................................23

3.3. Befüllen der Messzelle....................23

3.4. Die Messung im Einzelnen sowie

Gerätefunktionen....................................24

3.5. Abweichendes Messergebnis.........34

4. Eigenschaften der Getreidearten.......35

5. Batterie...............................................36

6. Wartung, Garantie und Aufbewahrung

des Feuchtemessers..............................37

Operating instructions for Wile 65

1. ox Contents

- Wile 65 -moisture meter

- filling cup

- carrying case

- carrying strap

- operating instructions

- 9 V 6F22 battery (installed)

2. Technical features of the meter

Wile 65 measures the moisture content of

whole grains and seeds. Wile 65 used

together with Wile 651L -external

temperature probe (extra accessory) is

suitable for measuring the temperature of

stored grain and seeds, hay, compost etc.

Technical features of Wile 65 -moisture

meter:

- Direct moisture read-out for 16 different

grains

- Informative alphanumeric display for

easy use

- Connector for external temperature

probe

- Automatic temperature compensation of

the difference between the temperature of

grain and the meter

- Automatic average calculation (max 99

measurement results)

- Opportunity to adjust the measurement

result to conform to the result of oven

drying as a reference value or to other

reference value (use Adjustment

-function).

- Quick guide to the measurement on the

side label of the meter

The meter shows the material moisture

content in weight percent. Measurement

method is based on the alternating current

resistance (capacitance). The

measurement repeatability is +/- 0,5

percent moisture or better.

Moisture measurement range:

grain and seeds 8-35%

oil seeds 5-25%.

(for more information see the package

box).

Temperature measurement range:

0-60°C

Method of moisture content definition is

based on the technical specification: grain

ISO 712, oil seeds ISO 665 and corn ISO

6540.

Our method to sample the grain is based

on ISO 950 standard and while handling

the samples we follow ISO 7700/1 and

ISO 7700/2 standards (ISO = International

Organization for Standardization).

3. Usage

3.1. Preparation for the measurement

Important: The scales of Wile- moisture

meters are developed to measure the

quality of standard grain. Exceptional

growth conditions and new sorts of grain

can considerably affect grain features.

Therefore, before the new harvest season

we recommend you check the readings of

your meter against an oven dried sample.

If the measurement result is different from

the reference value, adjust the result to

conform to the reference value according

to the instructions in paragraph Adjusting

the result). Always take measurements of

several samples and calculate the

moisture content of the grain load by

calculating the average of those

measurements. This is especially

important when you handle a lot of grain.

If the meter has not been used for some

time, follow these steps:

- replace the battery (for more details

see paragraph attery)

- read the operating instructions

thoroughly

- make sure that the measuring cup is

empty and clean

- if needed clean the measurement

cup with a wood stick or tough brush.

3.2. Taking the sample

- Taking the sample is one of the most

important steps of the measurement. It is

very important to take a representative

sample, which represents as accurate as

possible the entire lot of grain.

- Always take samples from different

places within the load. We recommend

taking at least five samples. Define

moisture content of the load by calculating

the average value of your five

measurements.

- Remove scrap, green and other

exceptional grains from the samples.

- When taking the sample directly from the

dryer wait until the temperature

compensation is done or pre-warm the

measuring cup with warm grain.

- Remember that the moisture inside the

load in the grain dryer varies until the final

stage of the drying process.

3.3. Filling the measuring cup

- fill the measuring cup one quarter with

grain (1)

- gently shake the meter (grains will settle

tighter in the measuring cup) (2)

- fill the measuring cup to the brim (3)

- wipe off excess grain (4)

- twist and tighten the cap until the center

of the cap is on the same level with the

cap's surface (5,6).

Important: Always fill the measuring cup

according to the given instructions and

always in the same way. Filling the

measuring cup in a different way can

cause the incorrect measurement result!

3.4. Measurement and functions of the

meter

ress the left Menu -button to list the

options and to select the option. Confirm

your choice by pressing the right ON/OFF

(OK) -button. The text appearing on the

screen will give you more information

about the usage of the buttons.

Action How to use

Switching the

power on

ress ON/OFF -button

Switching the

power off

ress ON/OFF -button

when the button label is

OFF or the menu option

is OFF. ower will also

be switched off

automatically in about 30

seconds from the latest

action.

Checking and

choosing the

scale

Switch on the meter with

a single press on the

ON/OFF -button The

name of the currently

selected grain will

appear on the display. If

you want to change the

scale follow the

instructions:

Go to the main menu

with a single press on

the Menu -button. List

the options pressing the

Menu -button until Grain

appears on the display.

roceed to choosing the

grain with a single press

on ON/OFF when Grain

is displayed. Then keep

pressing the Menu

-button until the name of

the correct grain is

displayed. Confirm your

choice with a single

press on ON/OFF

-button.

Moisture

measurement

Switch on the meter.

When the name of the

currently selected grain

is displayed, press once

the ON/OFF –button.

The meter will calculate

the measurement and in

a moment the

measurement result

(moisture content) will be

displayed. At the same

time the temperature of

grain in the measuring

cup will appear on the

left upper edge of the

display.

Important! If an

external temperature

probe is connected to

the meter, remember to

disconnect the probe

before the moisture

measurement.

Average

calculation.

Make the measurement

as usual. When the

Saving the

measurement

result for the

average

calculation.

result is displayed press

the Menu -button. When

Add average appears

on the left lower edge of

display press ON/OFF.

Now the measurement

result has been saved

for average calculation.

If you don't want to

include the

measurement result into

the average calculation,

don't do anything after

the measurement, just

wait until the meter

automatically turns off

and is ready for the next

measurement.

Important! efore

calculating the average

value of every new

load of material, make

sure that average

calculation memory is

empty and erase it if

required.

Checking the

number of

measurement

results saved

for average

calcultaion.

Switch on the meter. List

the options by pressing

the Menu -button until

Average appears on the

display and then press

ON/OFF. The number of

measurement results

saved for average

calculaton and the

average value of those

measurements will

appear on the display.

Tabla de contenidos

Idiomas:

Otros manuales de Instrumento de medición de Farmcomp

Farmcomp

Farmcomp Wile 78 Crusher Manual de usuario

Farmcomp

Farmcomp Unimeter Digital Manual de usuario

Farmcomp

Farmcomp Wile 27 Manual de usuario

Farmcomp

Farmcomp FARMEX HT-PRO Manual de usuario

Farmcomp

Farmcomp Wile BIO Moisture Manual de usuario

Farmcomp

Farmcomp wile 55 Manual de usuario

Farmcomp

Farmcomp WILE-26 Manual de usuario

Farmcomp

Farmcomp Wile-25 Manual de usuario

Farmcomp

Farmcomp Wile Rice Manual de usuario

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario