Fagor DEN 8000 Manual de usuario

DEN 8000

Encoder

4xA/V ASI

TABLE OF CONTENTS

1.-SAFETY INSTRUCTIONS

2.-SYSTEM PRINCIPLE

2.1 SYSTEM DIAGRAM

2.2 WORKING PRINCIPLE

2.2.1 VIDEO AUDIO A/D PROCESS

2.2.2 A/V ENCODING

2.2.3 AV TS PROCESS

2.2.4 DATA OUTPUT PORT

3.-SPECIFICATIONS

4.-EQUIPMENT CONNECTION

4.1 FRONT PANEL DISPLAY & KEY BUTTON

4.2 REAR PANEL

5. OPERATION

5.1 BASIC PROGRAMMING

5.2 MENU OPTION

5.2.1 LOCK STATUS DISPLAY

5.2.2 MAIN MENU DISPLAY

5.2.3 ENCODER SETTING

5.2.4 VIDEO SETTING

5.2.5 AUDIO SETTING

5.2.6 SYSTEM SETTING

5.2.7 OUTPUT SETTING

5.2.8 NETWORK SETTING

5.2.9 SAVE CONFIG

5.2.10 LOAD CONFIG.

5.2.11 VERSION

5.2.12 LANGUAGE

5.2.13 INFORMATION ERROR

6.-SYSTEM FAILURE & TROUBLE SHOOTING

6.1 INDICATOR STATUS

6.2 TROUBLE SHOOTING

7.-CE MARKING

1. SAFETY INSTRUCTION

●Read this manual carefully before use.

●Do not open the case without disconnecting it from the mains

●Allows the air circulation around the equipment

●Protects against the water or liquids drops on the equipment

●Do not place near to the heat sources.

●Do not obstruct he ventilation slots.

2. SYSTEM PRINCIPLE

2.1. SYSTEM DIAGRAM

2.2. WORKING PRINCIPLE

The DEN 8000 encoder structure is as per above picture, which consists of AV A/C process

unit, AV encoding unit, TS process unit, data output unit and CPU.

2.2.1 VIDEOAUDIO A/D PROCESS

AV A/D process unit converts analog audio & video input into digital format and send it to

encoding chipset. Video port supports ordinary signal source in broadcasting and various

standard video &audio signal ports, including analog CVBS input and mono, stereo audio

input. PAL/NTSC are both acceptable in this device.

2.2.2. A V ENCODING

AV encoding adopts MPEG-2 real-time encoding chipset, encoding the digital AV signal as

MPEG-2 format. The video encoding process is according to MPEG-2 main profile (MP@ML)，

max bit rate is 15Mbps.The audio encoding process is done by professional audio encoding

software according to MPEG-2 layer I and layer II.

2.2.3. A V TS PROCESS

A V TS multiplexing includes the 4 routes ES to MPTS process. All data are MPEG-2

compliance.

2.2.4. DATA OUTPUT PORT

The output TS is compliant with DVB ASI.

3. SPECIFICATIONS

3.1. APPLICATION

The DEN 8000 encoder transforms the 4input analogue A/V sources into a single DVB-ASI

digital stream.

3.2. CHARACTERISTICS

> Multiplexer function for up to 4 analogue A/V sources (PAL, NTSC).

> MPEG-2 MP@ML output video encoding, bit rate 1-15Mbps.

> MPEG-1 Layer 1, Layer 2 audio encoding.

> Programming via front panel (keyboard + LCD display) or PC (local or remote).

> Mountable in 19” rack.

> Includes:

- 4x 3RCA-3BNC cables for 4 analogue A/V sources.

-1 x BNC-F(m) cable for one COFDM output.

-1 x user's manual.

-1 x 230Vac cable.

4. EQUIPMENT CONNECTION

4.1. FRONT PANEL DISPLAY AND KEY BUTTON

LEFT, RIGHT：move the cursors

UP, DOWN：change parameters

ENTER：confirm and operate

Exit：back to upper menu or cancel the setting

Note ：

A、press ENTER and EXIT to unlock if device is in lock status

B、keyboard auto lock after 60 seconds without operation

C、in lock status, press “down” to see IP menu

LCD

Error indicator

POWER indicator

Directional arrow key

Enter

Exit

ENC 1~ENC4 Encoder Indicator

4.2. REAR PANEL

CH1 A/V input

CH2 A/V input

CH3 A/V input

CH4 A/V input

ASI port (optional )/IP out( optional)

ASI output port 1

ASI output port 2

Ethernet port

Power switch

5. OPERATION

5.1. BASIC PROGRAMMING GUIDE

•Switch on the power switch 9; the Front panel “Power” LED will be on

•Connect the A/V inputs: Yellow RCA to “CVBS”; White RCA to “L” input & Red RCA to

“R” input. When an useful signal is detected, the front panel ENC 1, ENC 2, ENC 3 or

ENC 4 will be on

•Connect the ASI output port 6 or 7 to the DMT 8000ASI Input

•The output bit rate is factory preset at 26 Mbps and each encoder at 6 Mbps. Both

parameters can be modified by programming

•Service name edition ( Example Encoder 1): Section 5.2.6.4

oEncoder 1 > System > Program Name

If one of the inputs is not used, this input could be removed from the output MUX

Entering in: Encoder x > Multiplexing > YES/NO: Section 5.2.3

5.2. MENU OPTION

5.2.1. LOCK STATUS DISPLAY

5.2.2. MAIN MENU DISPLAY

5.2.3. ENCODER SETTING: Each encoder can be programed using Up/Down keys and

pressing ENTER to confirm.

DEN 8000 4IN 1 Encoder

PG:04 BR：00.000Mbps

1. Encoder 1

2. Encoder 2

3. Encoder 3

4. Encoder 4

5. Output setting

6. Network setting

7. Save config.

8. Load config.

9. Version No.

10. Language

11. Error info

1.1 Multiplexing

1.1.1 Yes/No

1.2 Video

1.3Audio

1.4System

5.2.4. VIDEO SETTING: Select video config, LCD display as below :

5.2.4.1. VIDEO ENABLE. The user can switch ON/OFF the video at the output

5.2.4.2. VIDEO MODE: Three options can be chosen ( Auto, NTSC or PAL)

5.2.4.3. VIDEO GOP: Four structures could be chosen, the IBBP is recommended

5.2.4.4. BRIGHTNESS: The image brightness is adjusted

5.2.4.5. CONTRAST : The video contrast is adjusted

5.2.4.6. SATURATION: The color saturation is adjusted

1.2.1 Video Enable

1.2.2 Video mode

1.2.3 GOP

1.2.4 Brightness

1.2.5 Contrast

1.2.6 Saturation

1.2.7 Hue

1.2.8 Compression

1.1.1VIDEO

ENABLE

1 On

0Off

1.1.2 Video mode

Auto

NTSC

PAL

1.1.3GOP

IBP

IBBP

1.1.4 Brightness

127

1.1.5 Heft Contrast

127

1.1.6 Saturation

127

5.2.4.7. HUE: The color hue is adjusted

5.2.4.8. VIDEO COMPRESSION: The user can select one of them

5.2.5. AUDIO SETTING : The following parameters can be settled

5.2.5.1. AUDIO ENCODING TYPE :Two options can be chosen

5.2.5.2. SAMPLING FREQUENCY: There are three sampling rates to select

5.2.5.3. AUDIO BITRATE SETTING: One of them can be chosen

1.2.1 Audio Encoding

Layer1

Layer2

1.2.1Coding Type

1.2.2Samping Freq.

1.2.3Output bit rate

1.2.4Audio mode

1.2.2 Sampling rate

48 KHz

32 KHz

44.1 KHz

1.1.8 Video compression

3/4D1

2/3D1

HD1

SIF

1.1.7 Color

+000

1.2.3 Output bit rate

384Kbps

256Kbps

128Kbps

96 Kbps

64 Kbps

Tabla de contenidos

Otros manuales de Convertidor de medios de Fagor

Fagor

Fagor G2AP Manual de usuario

Fagor

Fagor L SINGLE Manual de usuario

Fagor

Fagor HA-D90 Manual de usuario

Fagor

Fagor evo PRO 100 Manual de usuario

Fagor

Fagor SAD Series Manual de usuario

Fagor

Fagor L3 Manual de usuario

Fagor

Fagor L3 Manual de usuario

Fagor

Fagor MM Series Manual de usuario

Fagor

Fagor SV2A Manual de usuario

Fagor

Fagor F SINGLE Manual de usuario

Fagor

Fagor S2AM Manual de usuario

Fagor

Fagor G3BD Manual de usuario

Fagor

Fagor SAS Manual de usuario

Fagor

Fagor HTT 102 Manual de usuario

Fagor

Fagor evo PRO 300 Manual de usuario

Fagor

Fagor L3BM Manual de usuario

Fagor

Fagor G2AI Manual de usuario

Fagor

Fagor SV2AD Manual de usuario

Fagor

Fagor SV2 Manual de usuario

Fagor

Fagor S2AD Manual de usuario

Fagor

Fagor S Series Manual de usuario

Fagor

Fagor evo PRO 100 D2 Manual de usuario

Fagor

Fagor SV3BM Manual de usuario

Fagor

Fagor G2AD Manual de usuario

Manuales populares de Convertidor de medios de otras marcas

SoundTraxx

SoundTraxx Blunami BLU-2200 Manual de usuario

SPROLINK

SPROLINK VA1 Manual de usuario

Acclaim Lighting

Acclaim Lighting DDC-1-AC Manual de usuario

Nikon

Nikon AF-S TC-20E III Manual de usuario

Axis

Axis AXIS Q7406 Manual de usuario

Omega

Omega TAC80B-J Manual de usuario

Zoom

Zoom Thunderbolt TAC-2R Manual de usuario

OST

OST iConverter 10/100M Manual de usuario

Vertiv

Vertiv Netsure Manual de usuario

birddog

birddog MINI Manual de usuario

Roland

Roland GI-10 Manual de usuario

Wallenstein

Wallenstein WX310 Manual de usuario

Pace

Pace MSS 200-1 Manual de usuario

Solar Converters

Solar Converters EQ 12/24-50 Manual de usuario

CYP

CYP EL-7400V Manual de usuario

TIE

TIE MIDI 1i1o Manual de usuario

DCS

DCS Vivaldi Upsampler Manual de usuario

Westermo

Westermo MCW-211 SERIES Manual de usuario