Extron electronics MPX 866 A Manual de usuario
Specifications — MPX 866 A
Video
Routing
RGB/VGA ........................ 8 x 6 matrix
S-video/composite video 6 x 6 matrix
Gain ............................................... Unity
Bandwidth
RGB/VGA ........................ 300 MHz (-3 dB), fully loaded
S-video/composite video 150 MHz (-3 dB), fully loaded
0 - 10 MHz: no more than +0.1 dB to -0.1 dB
0 - 30 MHz: no more than +0.1 dB to -0.5 dB
Differential phase error .............. 1.0º at 3.58 MHz and 4.43 MHz
Differential gain error ................. 1.0% at 3.58 MHz and 4.43 MHz
Crosstalk
RGB/VGA ........................ <-50 dB @ 10 MHz, <-30 dB @ 100 MHz
S-video/composite video -50 dB @ 5 MHz
Switching speed ........................... 100 ms (max.)
Video input
Number/signal type
RGB/VGA ........................ 8 VGA-UXGA RGBHV, RGBS, RGsB, RsGsBs
S-video/composite video Up to 4 S-video and 2 composite video
or
6 composite video
Connectors
RGB/VGA ........................ 8 female 15-pin HD
S-video/composite video 4 x 2 female BNC for S-video or composite video (inputs 11 to 14) and
2 x 1 female BNC for composite video or genlock only (inputs 9 and 10)
Nominal level ............................... 1 Vp-p for Y of S-video and for composite video
0.7 Vp-p for RGB
0.3 Vp-p for C of S-video
Minimum/maximum levels
RGB/VGA ........................ Analog: 0.3 V to 1.5 Vp-p with no offset
S-video/composite video Analog: 0.5 V to 2.0 Vp-p with no offset
Impedance .................................... 75 ohms
Horizontal frequency (RGB) ...... 15 kHz to 145 kHz
Vertical frequency (RGB)............ 30 Hz to 170 Hz
Return loss
RGB/VGA ........................ <-40 dB @ 5 MHz
S-video/composite video <-30 dB @ 5 MHz
DC offset (max. allowable, S-video or composite video)
1.5 V
External sync (genlock, S-video or composite video)
0.3 V to 0.4 Vp-p
Video output
Number/signal type
RGB/VGA ........................ 6 VGA-UXGA RGBHV, RGBS, RGsB, RsGsBs, (follows input type)
S-video/composite video 2 S-video, 2 S-video or composite video, and 2 composite video
Connectors
RGB/VGA ........................ 6 female 15-pin HD
S-video/composite video 2 x 2 female BNC for S-video only (outputs 9 and 10)
2 x 2 female BNC for S-video or composite video pass-through (outputs 11 and 12)
2 x 1 female BNC for composite video only (outputs 7 and 8)
1-2 MPX 866 A Media Presentation Matrix Switcher • Specifications
Nominal level ............................... 1 Vp-p for Y of S-video and for composite video
0.7 Vp-p for RGB
0.3 Vp-p for C of S-video
Minimum/maximum levels
RGB/VGA ........................ Analog: 0.3 V to 1.5 Vp-p with no offset (follows input)
S-video/composite video Analog: 0.0 V to 2.0 Vp-p with no offset
Impedance .................................... 75 ohms
Return loss
RGB/VGA ........................ -40 dB @ 5 MHz
S-video/composite video -30 dB @ 5 MHz
DC offset
S-video/composite video ±5 mV with input at 0 offset
VGA ................................... ±10 mV with input at 0 offset
Switching type
RGB/VGA ........................ Triple-Action
S-video/composite video Vertical interval
Sync
Input type (VGA group) ............. RGBHV, RGBS, RGsB, RsGsBs
Output type (VGA group) .......... RGBHV, RGBS, RGsB, RsGsBs (follows input)
Genlock connector ....................... 1 BNC female (video input 9)
Standards ...................................... NTSC 3.58, NTSC 4.43, PAL, SECAM
Input level ..................................... 1.9 V to 5.0 Vp-p
Output level .................................. TTL: 5.0 Vp-p, unterminated for RGBHV, RGBS
Input impedance .......................... 510 ohms
Output impedance ...................... 75 ohms
Max input voltage ....................... 5.0 Vp-p
Max. propagation delay.............. 30 ns
Max. rise/fall time ....................... 4 ns
Polarity .......................................... Positive or negative (follows input)
Audio
Routing .......................................... 14 x 6 stereo matrix
Gain ............................................... Unbalanced output: -6 dB; balanced output: 0 dB
Frequency response ..................... 20 Hz to 20 kHz, ±0.05 dB
THD + Noise ................................ 0.03% @ 1 kHz, 0.3% @ 20 kHz at nominal level
S/N ................................................ >85 dB, balanced, at maximum output (21 dBu) (unweighted)
Crosstalk ....................................... <-120 dB @ 1 kHz, fully loaded
Stereo channel separation .......... >80 dB @ 1 kHz
CMRR ............................................ >75 dB @ 20 Hz to 20 kHz
Volume range ............................... -98 dB to 0 dB (volume numbers 0 to 64 in 1.0 dB steps)
Full attenuation is volume level 0, -98 dB. The default is -0 dB, volume level 64.
Audio input
Number/signal type ................... 14 stereo, balanced/unbalanced
Connectors .................................... (14) 3.5 mm captive screw connectors, 5 pole
Impedance .................................... >25k ohms unbalanced, 50k ohms balanced, DC coupled
Nominal level ............................... -10 dBV (316 mVrms)
Maximum level ............................ +20 dBu, (balanced or unbalanced) at 1% THD+N
Input gain adjustment................. –18 dB to +24 dB, adjustable per input by RS-232, Ethernet, or front panel
0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV 2 dBu
MPX 866 A Media Presentation Matrix Switcher • Specifications 1-3
Specifications — MPX 866 A (continued)
Audio output
Number/signal type ................... 6 stereo, balanced/unbalanced
Connectors .................................... (6) 3.5 mm captive screw connectors, 5 pole
Impedance .................................... 50 ohms unbalanced, 100 ohms balanced
Gain error ...................................... ±0.1 dB channel to channel
Maximum level (Hi-Z) ................ >+20 dBu, balanced or unbalanced at 1% THD+N
Control/remote — switcher
Serial host control port ............... (2) RS-232: 2 rear panel 3.5 mm captive screw connectors, 3 pole;
1 front panel 2.5 mm stereo mini jack (in parallel with the rear panel secondary
port)
Baud rate and protocol ............... 9600 baud; 8 data bits, 1 stop bit, no parity
Serial control pin configurations Captive screw connectors: 1 = TX, 2 = RX, 3 = GND
Mini stereo jack: tip = TX, ring = RX, sleeve = GND
Ethernet host control port .......... 1 RJ-45 female connector
Ethernet data rate ........................ 10/100Base-T, half/full duplex with autodetect
Ethernet protocol ......................... ARP, DHCP, ICMP (ping), TCP/IP, Telnet, HTTP, SMTP
Default settings ............................ Link speed and duplex level = autodetected
IP address = 192.168.254.254
Subnet mask = 255.255.0.0
Gateway = 0.0.0.0
DHCP = off
Web server .................................... Up to 200 simultaneous sessions
1 MB nonvolatile user memory
Program control ........................... Extron’s control/configuration program for Windows®
Extron’s Simple Instruction Set (SIS™)
Microsoft®Internet Explorer ver. 6 or higher, Telnet
General
Power ............................................. 100 VAC to 240 VAC, 50/60 Hz, 15 watts, internal, autoswitchable
Temperature/humidity .............. Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +104 °F (0 to +40 °C) / 10% to 90%, noncondensing
Rack mount ................................... Yes
Enclosure type .............................. Metal
Enclosure dimensions ................. 3.5" H x 17.0" W x 9.4" D (2U high, full rack wide)
8.9 cm H x 43.2 cm W x 23.9 cm D
(Depth excludes connectors. Width excludes rack ears.)
Product weight ............................. 15 lbs (6.8 kg)
Shipping weight ........................... 25 lbs (12 kg)
DIM weight .................................. TBD
Vibration ....................................... ISTA 1A in carton (International Safe Transit Association)
Listings .......................................... UL, CUL
Compliances ................................. CE, FCC Class A, VCCI, AS/NZS, ICES
MTBF ............................................. 30,000 hours
Warranty ....................................... 3 years parts and labor
All nominal levels are at ±10%.
Specifications are subject to change without notice.
(7.52-091006-D2)
1-4 MPX 866 A Media Presentation Matrix Switcher • Specifications
Otros manuales para MPX 866 A
2
Tabla de contenidos
Otros manuales de Cambiar de Extron electronics
Extron electronics
Extron electronics System 4LQ xi Manual de usuario
Extron electronics
Extron electronics SMX System Manual de usuario
Extron electronics
Extron electronics SW 2 AR MX Manual de usuario
Extron electronics
Extron electronics SW2 RGBHVcc Manual de usuario
Extron electronics
Extron electronics DTP T DSW 4K 333 Manual de usuario
Extron electronics
Extron electronics PoleVault PVS 204SA Manual de usuario
Extron electronics
Extron electronics FOX SW8 MM Manual de usuario
Extron electronics
Extron electronics FOX 4G Matrix 3200 Manual de usuario
Extron electronics
Extron electronics IN1804 Series Manual de usuario
Extron electronics
Extron electronics Extron SW 2 VGAcc Manual de usuario
Extron electronics
Extron electronics SW 2 RGB Manual de usuario
Extron electronics
Extron electronics RGB 320 Manual de usuario
Extron electronics
Extron electronics VSW 2VGA A Manual de usuario
Extron electronics
Extron electronics XTP T USW 103 Manual de usuario
Extron electronics
Extron electronics ISS 608 Manual de usuario
Extron electronics
Extron electronics System 5cr Plus Manual de usuario
Extron electronics
Extron electronics SW 4 AR MX HV Manual de usuario
Extron electronics
Extron electronics MLS 608 D Series Manual de usuario
Extron electronics
Extron electronics PVS 305SA Manual de usuario
Extron electronics
Extron electronics MPS 601 Manual de usuario
