Extron electronics DMP 64 Manual de usuario

IMPORTANT:

Go to www.extron.com for the

complete user guide, installation

instructions, and specifications.

Receive (Rx)

Transmit (Tx)

Ground ( )

Bidirectional

RS-232

Device

Ground ( )

Receive (Rx)

Transmit (Tx)

RxTx

Do not tin

the wires!

Disconnect Power and Mount the DMP64

Disconnect power to the DMP64 and turn off all devices connected to it. The DMP64 is housed in a half rack width, 9.5 inches

deep, 1U high metal enclosure that can sit on a table with the provided rubber feet or can be rack mounted. Select a suitable

mounting location, then choose an appropriate mounting option.

Connections

aConnect the Power Supply — The included power supply is prewired.

Plug the captive screw connector into the DMP64 power jack.

bMic/Line Inputs — Attach up to six microphone or mono line level

devices, balanced or unbalanced, to the DMP64 using the audio input

wiring diagram shown at right.

cConnect the Audio Outputs — For balanced or unbalanced mono audio

output, connect an audio output device to each of the four outputs. Wire

the connectors as shown in the audio output wiring diagram shown at

right.

dConnect the I/O Ports — To control or monitor external devices, connect

up to six digital I/O ports (connections not shown). See the DMP64 User

Guide for additional information.

RESET

DMP 64

POWER

12V

1.0A MAX

LAN

123

456

Tx Rx G

RS-232 (2)

Tx Rx G

RS-232 (1)

456 G

123 G

MIC

+48V

MIC/LINE INPUTS

OUTPUTS

I/O

REMOTE

This guide provides basic instructions for an experienced technician

to install the DMP64 ProDSP™Digital Matrix Processor and

DSPCongurator™software. For additional information see the

DMP64 User Guide found at www.extron.com.

IP Address: 192.168.254.254

Subnet Mask: 255.255.0.0

Default Gateway: 0.0.0.0

DHCP: OFF

DMP 64 • Setup Guide

ATTENTION:

• For unbalanced audio outputs, connect

the sleeves to ground.

• DO NOT connect the sleeves to the

negative (–) contacts.

eConnect a Control System — There are three options to connect a

control system: LAN, RS‑232, and USB. Extron recommends using the

LAN port for conguration and remote control of the DMP64.

LAN — Using a standard Ethernet cable, connect to a network via the LAN port (â). The

table at right shows the default network settings.

NOTE: To connect the DMP64 directly to a computer, use a crossover Ethernet

cable.

RS-232 — Connect the host RS‑232 cable to the rear panel of the switcher (à) using the

provided 3‑pole captive screw connector (see the wiring diagram at right).

USB — Connect the host USB port to the front panel conguration port, (notshown), using

a USB A to mini‑B cable. The USB connection should be used only for conguration. Use

the RS‑232 or LAN port for remote control of the DMP64.

When all connections have been made, power up the input and output devices, then apply

power to the DMP64.

(5 mm) MAX. (typ)

Audio OUTPUT Wiring

Unbalanced Output

Tip

Sleeve

NO Ground Here

Balanced Output

Tip

Sleev

Ring

Audio INPUT Wiring

Balanced Input

Sleeve

Ring

Tip Tip

Sleeve

Jumper

Unbalanced Input

DMP 64 • Setup Guide (continued)

DSPConﬁgurator Software Installation

There are no hardware controls for the DMP64. All conguration and control is done using the DSPCongurator software. Install

DSP Congurator on a PC running Microsoft®Windows®2000 or later. For full details about computer requirements, see the

DMP64 User Guide on the Extron website (www.extron.com).

To Download the DSPConﬁgurator Software from the Extron website:

1. On the Extron home page, click the Download tab. The Download page opens.

2. Under Software in the left column, select DSP Congurator Software. The DSP Congurator Software page opens.

3. Click the Download Now button and follow the on‑screen instructions.

NOTE: On the first installation of DSP Configurator, the USB driver automatically loads. Follow the on‑screen instructions.

Once the USB driver has loaded, the DSP Configurator software continues to load.

By default, the program installs in the folder C:\Program Files\Extron\DSP_Congurator and an icon is placed on the

desktop.

68-1790-50

Rev. C

10 13

DMP64 Setup and Control Software Conﬁguration

When the DMP64 is connected to power, an audio source, a power amplier, and speakers, it produces an audio output that can

easily be tailored to the listening environment. When a different conguration is required, change it using the setup and control

software, DSPCongurator.

To Conﬁgure the DMP64:

1. Ensure the control computer is connected to the Ethernet port

(recommended), RS‑232 port, or front panel USBCong port

of the DMP64 (see “Connect a Control System” on page1).

2. Start the DMPCongurator software. Select DMP 64 as the

device being connected to. The main DMP64 screen opens.

3. The program starts in Emulate mode.

a. To create a conguration ofine and upload (push) those

changes to the DMP64 at a later time, remain in emulate

mode.

b. To push a conguration to the device, or to make

immediate changes to the conguration or operation,

select Live mode.

NOTES:

• When live mode is selected, a connection dialog box

appears. Select the desired connection and follow the

on‑screen prompts.

• The connection can be changed from the Tools menu

by selecting Connect to Device, or by pressing F5.

For more information about live and emulate modes, see the DMP64 User Guide.

The main screen provides access to all the features of the DMP64. Full details about using the DSPCongurator software

can be found in the DMP64 User Guide on the Extron website at www.extron.com or in the help le for the program.

Extron Headquarters

+800.633.9876 Inside USA/Canada Only

Extron USA - West Extron USA - East

+1.714.491.1500 +1.919.850.1000

+1.714.491.1517 FAX +1.919.850.1001 FAX

Extron Europe

+800.3987.6673

Inside Europe Only

+31.33.453.4040

+31.33.453.4050 FAX

Extron Asia

+800.7339.8766

Inside Asia Only

+65.6383.4400

+65.6383.4664 FAX

Extron Japan

+81.3.3511.7655

+81.3.3511.7656 FAX

Extron China

+4000.EXTRON

+4000.398766

Inside China Only

+86.21.3760.1568

+86.21.3760.1566 FAX

Extron Middle East

+971.4.299.1800

+971.4.299.1880 FAX

Extron Korea

+82.2.3444.1571

+82.2.3444.1575 FAX

Extron India

1800.3070.3777

Inside India Only

+91.80.3055.3777

+91.80.3055.3737 FAX

Otros manuales para DMP 64

Otros manuales de Conmutador de matriz de Extron electronics

Extron electronics

Extron electronics MVX 128 VGA A Manual de usuario

Extron electronics

Extron electronics MMX 32 VGA A Manual de usuario

Extron electronics

Extron electronics FOX 4G Matrix 14400 Manual de usuario

Extron electronics

Extron electronics DMS 1600 Manual de usuario

Extron electronics

Extron electronics XTP II CrossPoint Series Manual de usuario

Extron electronics

Extron electronics CrossPoint 450 Plus 64 Series Manual de usuario

Extron electronics

Extron electronics XTP II CrossPoint 1600 Manual de usuario

Extron electronics

Extron electronics TPX 88 Manual de usuario

Extron electronics

Extron electronics CrossPoint 450 Plus 84 HV Manual de usuario

Extron electronics

Extron electronics DXP DVI Pro Manual de usuario

Extron electronics

Extron electronics ISM Series Guía de inicio rápido

Extron electronics

Extron electronics DMS 1600 Manual de usuario

Extron electronics

Extron electronics DXP DVI Manual de usuario

Extron electronics

Extron electronics DXP DVI Pro Manual de usuario

Extron electronics

Extron electronics MVX 128 Manual de usuario

Extron electronics

Extron electronics MTPX 1616 Manual de usuario

Extron electronics

Extron electronics MMX 32 VGA MTP Manual de usuario

Extron electronics

Extron electronics DTP CrossPoint 108 4K Manual de usuario

Extron electronics

Extron electronics ISM 182 Manual de usuario

Extron electronics

Extron electronics TPX 88 Series Manual de usuario

Extron electronics

Extron electronics Matrix 50 Series Manual de usuario

Extron electronics

Extron electronics SMX System Manual de usuario

Extron electronics

Extron electronics CrossPoint 450 Plus 64 Series Manual de usuario

Extron electronics

Extron electronics CrossPoint 450 Plus 64 Series Manual de usuario

Manuales populares de Conmutador de matriz de otras marcas

Broadcast Tools

Broadcast Tools SS 8.2 Manual de usuario

Altimium

Altimium MATF32 Manual de usuario

ALFAtron

ALFAtron ALF-MUK44N Manual de usuario

Monoprice

Monoprice Blackbird 15377 Manual de usuario

Kramer

Kramer XL 3216VS Manual de usuario

PTN

PTN FMX12 Manual de usuario

CYP

CYP nT15GX01 Manual de usuario

Kramer

Kramer VP-2x2 Manual de usuario

Kramer

Kramer Sierra Video 6432V5xl Manual de usuario

TESmart

TESmart HMA0402A40 Manual de usuario

Octava

Octava HD4XSTPMX Manual de usuario

Intelix

Intelix FLX-88 Instrucciones de funcionamiento

Kramer

Kramer LASSEN XL 3232S Manual de usuario

Roland

Roland XS-1HD Manual de usuario

Kramer

Kramer VS-66HDCPxl Manual de usuario

Atlona

Atlona AT-HDMI-22M Manual de usuario

Link

Link HD8X8 Manual de usuario

AMX

AMX AVS-OP-2020-117 Instrucciones y recetas