Event Lighting LM7X12W Manual de usuario

WASH MOVING HEAD

LM7X12W

USER MANUAL

For safety, please read this user manual carefully before initial use.

Event Lighting reserves the right to revise the manual at any time. Information and specifications within this manual are subject to

change without notice. Event Lighting assumes no liability or responsibility for any errors or omissions. Please consult Event Lighting

for any clarification or information regarding this item.

www.event-lighting.com.au

Ver.06

Safety Instructions

WARNING

• Do not open this device, there is no user-serviceable parts inside. Risk of electric shock.

• Do not look at the light source when the device is on.

• CAUTION: This unit's housing may be hot during and after operation.

• Install this device in a location with adequate ventilation, at least 20 inch (50 cm) from adjacent surfaces.

• Do not leave any flammable material within 50 cm of this unit while operating or connected to power.

• Use a safety chain when mounting this device overhead.

• Do not operate this device outdoors or in any location where dust, excessive heat, water, or humidity may affect it.

• Do not operate this device if the housing, lenses, or cables appear damaged.

• Do not connect this device to a dimmer or rheostat.

• ONLY connect this device to a grounded and protected circuit.

• ONLY use the hanging bracket to carry this device.

• In case of a serious operating problem, stop using immediately.

• The maximum ambient temperature is 104° F (40° C). Do not operate this device at higher temperatures.

Power Input & Power Linking

This device has an auto-switching power supply work with input voltage range of 100~240 VAC, 50/60 Hz.

Link up to the maximum 8A. DO NOT exceed this.

Fuse Replacement

If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating.

Before replacing the fuse, unplug mains lead.

Procedure:

Step 1: Unscrew the fuse holder on the rear panel with a fitting screwdriver from the housing (anticlockwise).

Step 2: Remove the old fuse from the fuse holder.

Step 3: Install the new fuse in the fuse holder.

Step 4: Replace the fuse holder in the housing and fix it.

Product Installation

This device can be mounted in many orientations provided each

individual device is secured by the use of correct mounting bracket.

Use a safety chain when mounting this device overhead.

Product Dimensions

Menu Operation

Display Function

1.DMX Address 001- 512 Select DMX address from 001 to 512

2.Speed Mode Fade Speed / Fast Speed Set movement speed (Slow or Fast)

3.Master/Slave Master / Slave Select Master or Slave mode

4.Auto Mode Program1 - Program8 Select built-in program

5.Sound Mode OFF / ON Set sound active mode

6.Pan Rev OFF / ON Reverse Pan

7.Tilt Rev OFF / ON Reverse Tilt

8.Display Rev OFF / ON Reverse display

9.Sensitivity 000 - 100 Set sound sensitivity level

10.Factory Reset OFF / ON Restore settings to factory default

11.Calibration

All To Origin Clear PAN and TILT Home Position after 3s

Pan 000-120 Set calibration for Pan

Tilt 000-120 Set calibration for Tilt

Focus 000-120 Set calibration for Focus

13.Reset Reset

DMX Chart

15 channel Mode

Channel Value Function

1 000 - 255 Pan Coarse

2 000 - 255 Pan Fine

3 000 - 255 Tilt Coarse

4 000 - 255 Tilt Fine

5 000 - 255 XY SPEED

6 000 - 255 Dimmer(0-100%)

000 - 009 Shutter closed

010 - 245 Strobe effect slow to fast

246 - 255 Shutter open

8 000 - 255 Red

9 000 - 255 Green

10 000 - 255 Blue

11 000 - 255 White

12 000 - 255 Color Temp

000 - 010 closed

011 - 020 R

021 - 030 G

031 - 040 B

041 - 050 W

051 - 060 R+G

061 - 070 G+B

071 - 080 B+W

081 - 090 R+B

091 - 100 G+W

101 - 110 R+W

111 - 120 R+G+B

121 - 130 R+G+W

131 - 140 G+B+W

141 - 150 RGBW

151 - 255 Jump from slow to fast

14 000 - 010 Macro Color Line (Disable)

011 - 255 Slow from slow to fast

000 - 020 No Function

021 - 040 Internal program 1

041 - 060 Internal program 2

061 - 080 Internal program 3

081 - 100 Internal program 4

101 - 120 Internal program 5

121 - 140 Internal program 6

141 - 160 Internal program 7

161 - 180 Internal program 8

181 - 200 Empty

201 - 225 Motor Reset

226 - 255 Empty

16 0-255 Focus

Technical Specifications

Power

Input Voltage: 100~240V AC, 50/60 Hz

Power Consumption: 95W

Connection: IEC in

Fuse: T2A, 250V

Photometric

Light Source: 7 pcs 12W RGBW LED

Beam Angle: 6° - 40°

Output: 9500lux @ 3M

PWM: 3000Hz

LED Lifespan: 20,000 hours

Effects

Dimming: 0~100%

Strobe: 1~20 Hz

Zoom: 6° - 40°

Movement 8 / 16 – bit

Pan: 540° (1.4 sec)

Tilt: 190° (0.8 sec)

Control

Protocol: DMX512

DMX Channels: 16

Interface: 3-pin XLR in & out

Built-in Programming: Yes

Sound Active: Yes

Display: 4-button 1 inch OLED display control panel

Cooling: Fan

Housing

Materials: Metal & Flame retardant ABS

Finishing: Matte black

IP rating: IP20

Net Weight: 4 kg

Overall Size: 300 x 200 x 160 mm

WARRANTY

Please refer to your local dealer or please contact Event Lighting Pty Ltd

Website: www.event-lighting.com.au.

Tabla de contenidos

Otros manuales de Equipo de DJ de Event Lighting

Event Lighting

Event Lighting NITROBALL2 Manual de usuario

Event Lighting

Event Lighting CO2RGB Manual de usuario

Event Lighting

Event Lighting PAN2*1*30 Manual de usuario

Event Lighting

Event Lighting BLINDER Series Manual de usuario

Event Lighting

Event Lighting BM7W10RGBW Manual de usuario

Event Lighting

Event Lighting M7W40RGBW Manual de usuario

Event Lighting

Event Lighting PS300IICW Manual de usuario

Event Lighting

Event Lighting PAN8X1X30 Manual de usuario

Event Lighting

Event Lighting M1S80W Manual de usuario

Event Lighting

Event Lighting M6B20W Manual de usuario

Event Lighting

Event Lighting PIXBAR6x12 Manual de usuario

Event Lighting

Event Lighting PANBEAM4x4x10 Manual de usuario

Event Lighting

Event Lighting PAR19X12L Manual de usuario

Event Lighting

Event Lighting ZP200LE Manual de usuario

Event Lighting

Event Lighting SToRM Manual de usuario

Event Lighting

Event Lighting ORBIT2 Manual de usuario

Event Lighting

Event Lighting Fresnel Manual de usuario

Event Lighting

Event Lighting Fresnel Manual de usuario

Event Lighting

Event Lighting LM6X15 Manual de usuario

Event Lighting

Event Lighting DARKSTAR2 Manual de usuario

Event Lighting

Event Lighting PS200LECW Manual de usuario

Event Lighting

Event Lighting PIXBAR12x12 Manual de usuario

Event Lighting

Event Lighting PRO PAR PAR6X12OB Manual de usuario

Event Lighting

Event Lighting LM180 Manual de usuario

Manuales populares de Equipo de DJ de otras marcas

ALPHA LITE

ALPHA LITE ALPHA 1500 Manual del propietario

Chauvet

Chauvet OVATION E-930VW Manual de usuario

Zumtobel

Zumtobel APHRODITE Home Manual de usuario

Snow Masters

Snow Masters Zig Oscillator Manual de usuario

EuroLite

EuroLite 50530554 Manual de usuario

Beamz

Beamz BUV243 Manual de usuario

thomann

thomann Stairville DJ Lase 40-G MK-III Manual de usuario

Eagletone

Eagletone 6 Eyes Flower Manual de usuario

EuroLite

EuroLite FLD-1508 Manual de usuario

Technical Pro

Technical Pro LG8xSEA Manual de usuario

JB Systems

JB Systems Lounge Laser DMX Manual de usuario

Lightmaxx

Lightmaxx Vega Halo 90 Manual de usuario

Elation

Elation FUZE WASH Z350 Manual de usuario

Maverick

Maverick MK3 WASH Manual de usuario

Infinity

Infinity TF-260C7 Fresnel Manual de usuario

Chauvet

Chauvet EVE E-50Z Manual de usuario

Eliminator Lighting

Eliminator Lighting E 138 Manual de usuario

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Manual de usuario