Etac Turner PRO Instrucciones de uso

Turner PRO

Wheels / Wheel axles

Rotating mechanism

If turner rotates porly:

• Unscrew bolt (5).

• Clean Low friction disc (2) and ﬂoor plate (1).

• If deep groves or damages in (1) or (2), replace

(1,2,3,4,5).

• Apply loctite 243 or simular on bolt (5), tighten bolt

ﬁrmly (approx 20Nm).

If antislip knobs are missing or worn down:

• Flip out old knobs (3).

• Clean holes and push in new knobs.

Washing

• Lay the Turner PRO on the ﬂoor in an angeled position

after washing, so the water runs out of the rotating

mechanism.

• You may also use copressed air to blow dry inside

rotating mechanism.

• Controls wheel and shaft for wear.

• Check if the wheels turn easily, remove hair and dirt.

If wheels are worn out, or still rotates porly after

cleaning:

• Use a solvent-free detergent with a pH level bet-

ween 5 and 9.

• Can be washed at 70° C for 10 minutes.

• Flip out starlock with

an screwdriver or

simular (1).

• Remove bolt and

wheel.

• Replace 1,2,3.

• Place wheel between

forks.

• Insert bolt and knock

.starlock in place.

Reconditioning

Turner PRO

Leg Support

Main plate/outer pole

• Check bracket on leg support for cracks and

wear. If cracs, replace coplete leg support.

• Check cushion for wear, should be tight and ﬁrm

around the pipe. If loose or damaged, replace

cushion.

Original spare parts from Etac should always be used.

Handle/inner pole

• Check for cracs and dents, if cracs or dents

replace inner pole.

If complete leg support needs to be replaced:

• Unscrew bolts and remove outer pole.

• Pull leg support out of pole.

If cushion need to be replaced:

• Flip out knob (3) and remove cushion.

• Clean pipe, insert new cushion and knock knob in

place.

• Insert leg support with kneepads pointing upwards

• Make sure both knobs are on the same side (1).

• Tighten knob by turning knob clockwise (2).

• Place the base plate on an even surface. Insert

pole with knee pads facing away from

the wheels.(1)

• Insert all three screws into holes in the base

plate. Use allen key to screw in bolts. Apply

loctite 243 or simular on bolts, tighten

bolt ﬁrmly, (approx 20Nm). (2)

• Check for cracks and wear on main plate and

outer pole. If cracks, replace complete Turner-

PRO.

• Check bolted conection between pole and

main plate (3 bolts), if loose bolts tighten all

bolts.

Reconditioning

Otros manuales para Turner PRO

Otros manuales de Ayuda a la movilidad de Etac

Etac

Etac Molift RgoSling Shadow Manual de usuario

Etac

Etac 2Move Manual de usuario

Etac

Etac molift RgoSling 1721570 Manual de usuario

Etac

Etac Mustang R82 Manual de usuario

Etac

Etac immedia MultiGlide Single Patient Use Manual de usuario

Etac

Etac Molift Air Tilt Manual de usuario

Etac

Etac Molift EvoSling Shadow Manual de usuario

Etac

Etac immedia 4WayGlide NylonSheet Manual de usuario

Etac

Etac Molift Air Series Manual de usuario

Etac

Etac Star StabilAir SA3 Manual de usuario

Etac

Etac Molift UnoSling Manual de usuario

Etac

Etac immedia IM429 Manual de usuario

Etac

Etac Ono Instrucciones de uso

Etac

Etac immedia SatinSheet 2Direction Manual de usuario

Etac

Etac Stapel Manual de usuario

Etac

Etac molift MRS Duo Manual de usuario

Etac

Etac Rex Manual de usuario

Etac

Etac Molift RgoSling Toilet HighBack Manual de usuario

Etac

Etac Turner Manual de usuario

Etac

Etac immedia TwinSheet4Glide Manual de usuario

Etac

Etac Clean Series Manual de usuario

Etac

Etac Clean 24" Manual de usuario

Etac

Etac Molift EvoSling HighBack Manual de usuario

Etac

Etac molift EvoSling MediumBack Manual de usuario

Manuales populares de Ayuda a la movilidad de otras marcas

Alber

Alber Scalamobil iQ Manual de usuario

Ferno

Ferno CCT-PX Manual de usuario

HEPRO

HEPRO Gripo Manual de usuario

Otto Bock

Otto Bock Pheon 3R62 Manual de usuario

NRS Healthcare

NRS Healthcare M11090 Manual de usuario

Medline

Medline MDS86835DSHEC Guía de instalación

Guldmann

Guldmann Twin Turner II Manual de usuario

Drive

Drive ROOMBA Manual de usuario

Gate

Gate Balder Manual de usuario

Decon wheel

Decon wheel TNS Notos Manual de usuario

ExoAtlet

ExoAtlet ExoAtlet-II Manual de usuario

Invacare

Invacare Storm Series Manual de instrucciones

Rhythm Healthcare

Rhythm Healthcare B3800F Manual de usuario

AMF-BRUNS

AMF-BRUNS PROTEKTOR Manual de usuario

Drive DeVilbiss Healthcare

Drive DeVilbiss Healthcare OTTER Manual de usuario

Rhythm Healthcare

Rhythm Healthcare C500U Manual de usuario

Lumex

Lumex RJ4200A Manual de usuario

Rebotec

Rebotec Jumbo Manual de usuario