Esse-ti 4G.evox Manual de usuario
29/04/2022
User’s manual
Thanks for choosing an Esse-ti product
This product has been especially designed for
easy operation. It has been manufactured with
perfect workmanship using suitable materials for
long-lasting performance.
All Esse-ti products are subjected to extensive
reliability and operational testing in our
laboratories in order to provide total guarantee
for the user.
Esse-ti reserves the right to modify the product characteristics at any time
without prior notice.
TABLE OF CONTENTS
TABLE OF CONTENTS .......................................................................................................3
GENERAL INSTALLATION INSTRUCTIONS ..................................................................4
General Notes.....................................................................................................................4
Making the installation.......................................................................................................4
DESCRIPTION......................................................................................................................5
Main features.................................................................................................................................6
Hardware description..................................................................................................................... 8
LEDs.............................................................................................................................................. 9
INSTALLATION.................................................................................................................10
Installation recommendations ......................................................................................................10
Inserting the SIM card .................................................................................................................10
Inserting the antenna.................................................................................................................... 11
Connection to the telephone line..................................................................................................11
Connection to the LifTrack..........................................................................................................12
Connection to the power supply...................................................................................................13
Turning 4G.evox on..................................................................................................................... 13
4G.evox mounting operations......................................................................................................14
PROGRAMMING................................................................................................................15
Programming via telephone..............................................................................................15
(1) SIM card expiration control......................................................................................................19
(2) Battery check............................................................................................................................ 19
(3) External power failure control..................................................................................................20
(4) Automatic converter of dialed telephone number.....................................................................20
Programming via SMS.....................................................................................................22
Message format............................................................................................................................ 22
Notification message format........................................................................................................24
SERVICES...........................................................................................................................25
Incoming calls..................................................................................................................25
Outgoing calls ..................................................................................................................25
Measuring the signal level................................................................................................26
Reading the battery status.................................................................................................26
Reading the days missing to SIM card expiration ............................................................27
Reading advanced device and radio cell parameters ........................................................28
LIFTRACK...........................................................................................................................29
SIGNALS .............................................................................................................................30
Tones................................................................................................................................30
Calls signals .....................................................................................................................31
LED..................................................................................................................................31
Device status indicator LED (RED)............................................................................................. 31
Data transmission indicator LED (YELLOW).............................................................................31
Power supply status indicator LED (BLUE)................................................................................32
4G LTE/UMTS/GSM signal indicator LED (GREEN)................................................................33
Line status indicator LED (WHITE)............................................................................................ 33
PROBLEM-DETECTION GUIDE ......................................................................................34
EU DECLARATION OF CONFORMITY ..........................................................................35
Page 4
GENERAL INSTALLATION
INSTRUCTIONS
GENERAL NOTES
Carefully read the notes contained in this section as they provide important
information on safe correct installation, use and maintenance of the product.
•The product must be EXCLUSIVELY used for the purpose it was designed
for. Esse-ti shall not be responsible for damages arising from improper use.
•The product has been designed in compliance with the regulations in force and
must be installed in systems that comply with the provisions of law.
•Always disconnect power supply before performing internal or external
operations on the product (cleaning, maintenance, etc.).
•Always refer to an authorized service centre for repair.
•The device must be installed in a ventilated place, making sure that the
ventilation slots are never obstructed.
•Do not install the product in environments with risk of explosion.
•Make sure that the product has been installed as required.
•Do not introduce objects, liquids or powders inside the product. Do not use
sprays inside the product.
•Packing components (such as plastic bags, foam polystyrene, etc.) must be
kept out of the reach of children because potentially dangerous.
MAKING THE INSTALLATION
Internal telephone installations must be carried out by specialised personnel.
The installation and connection of telephone terminals to the
telecommunications network that do not comply with the regulations in force is
not permitted.
Page 5
DESCRIPTION
4G.evox is a 4G telephone gateway designed to be used in conjunction with the
LifTrack monitoring system.
Connected to LifTrack via CAN-bus, 4G.evox forwards the information
collected and processed by LifTrack sensors and inputs, via data, to an Esse-ti
server.
Real-time consultation of the acquired data is allowed by the e-stant web
application.
Equipped with an internal back-up battery to ensure operation even in the event
of a power failure, 4G.evox also enables fixed telephones, autodialers or other
telephone devices, connected to the TEL input, to send and receive calls over
the 4G LTE/UMTS/GSM network.
For correct operation the 4G.evox needs a SIM card enabled for
voice/SMS/data traffic.
Page 6
Main features
Hardware
•Module: LTE Cat 1 Penta-Band / UMTS HSPA+ Dual-Band / GSM Dual-
Band
•Frequency bands: LTE (700/800/900/1800/2100 MHz) / UMTS HSPA+
(900/2100 MHz) / GSM (900/1800 MHz)
•Speed: LTE Cat 1 download max. 10,2 Mbps / upload max. 5,2 Mbps
•3G / 2G fallback
•Automatic reboot under prolonged mobile signal absence
•FXS port (TEL terminal blocks)
•Terminal blocks for data transmission in CAN-bus standard
•Micro USB A/B port for PC connection
•SIM card slot: 2FF
•Device status indicator LED
•Data transmission indicator LED
•Power supply status indicator LED
•4G LTE/UMTS/GSM signal indicator LED
•Line status indicator LED
•Antenna connector: SMA/f
•100-240 Vac 12 Vdc external adapter input
•NiMH 800 mAh 7,2 V back up battery
•11-26 Vdc power supply input
•Firmware update OTA
Package contents
•4G.evox
•Magnetic base antenna with cable (L= 2 m)
•External adapter (input 100-240 Vac 50-60 Hz; output 12 Vdc 500 mA;
CE mark)
•Mounting screw
•User manual
Page 7
Functions
•Local programming via telephone (DTMF tones)
•Remote programming via SMS
•Reading of programming codes via SMS
•Data transmission through standard CAN-bus
•Voice calls
•Data connection and voice call simultaneously
•Display of caller identification
•Automatic country setting
•Clock setting
•CLIR
•Roaming setting
•SIM card expiration control
•Battery check
•External power failure control
•SMS notifications (SIM card expiration, low-battery, dead battery,
replaced battery, external power failure/restore, mobile network restore)
•Data notifications (battery, external power failure/restore, acquired data
by LifTrack) on the web-app e-stant web
•Measurement of 4G LTE/UMTS/GSM signal level
•Automatic converter of selected telephone number
•Receiver and transmitter gain adjustment
•Remote reboot function
Page 8
Hardware description
A Antenna cable connector
B SIM CARD housing
C Terminal blocks for CAN-bus data transmission
D Micro USB A/B port for PC connection
E Main terminal blocks
F 100-240 Vac 12 Vdc external adapter input
G Backup battery connector
H LED indicating device operation status (red), LED indicating data
transmission (yellow), LED indicating power supply status (blue),
LED indicating signal strength (green), LED indicating line status
(white)
I Battery compartment
Page 9
MAIN TERMINAL BLOCKS
TEL Telephone line output for telephone set connection or
autodialer/PABX analogue line connection
+12/24 V 11-26 Vdc power supply terminal block
GND Negative
CAN-BUS TERMINAL BLOCKS
1 GND
2 CAN bus L
3 CAN bus H
LEDs
Red LED: Device status indicator LED
Yellow LED: Data transmission indicator LED
Blue LED: Power supply status indicator LED
Green LED: 4G LTE/UMTS/GSM signal indicator LED
White LED: Line status indicator LED
LEDs flashing is described at chapter “Signals” (see page 31).
Page 10
INSTALLATION
Installation recommendations
•4G.evox must be installed in a location where the radio signal allows for using
the 4G LTE/UMTS/GSM system.
•It is advisable to leave plenty of space around 4G.evox for maintenance
operations.
•Do not install 4G.evox outdoors, since it lacks protection devices against
weather conditions that can damage 4G.evox (water, humidity, etc.).
•Do not install 4G.evox near magnetic devices.
•Do not install 4G.evox near electronic devices (radio or TV sets, Personal
Computers, wired radio systems, etc.) that could be subjected to RF
interference from 4G.evox; recommended distance from the antenna is min.
2,5 m.
•Do not install 4G.evox near medical devices. E.g. its operation may cause
damage to hearing aids or pacemakers.
•Always make sure that 4G.evox operation is permitted in the place of
installation (e.g. installation is not allowed in hospitals, airplanes, etc.).
Inserting the SIM card
Before inserting or replacing the SIM card, always make sure that 4G.evox has
been disconnected from the mains and that no electrostatic discharge is present
in order to avoid damaging it.
➢Carefully slide the SIM card into its housing cover.
WARNING
The SIM card PIN must be DISABLED. If the PIN is enabled, it
must be disabled through a mobile phone.
Tabla de contenidos
Otros manuales de Puerta de Esse-ti
Manuales populares de Puerta de otras marcas
LST
LST M500RFE-AS Manual de usuario
Kinnex
Kinnex Media Gateway Manual de usuario
2N Telekomunikace
2N Telekomunikace 2N StarGate Manual de usuario
Mitsubishi Heavy Industries
Mitsubishi Heavy Industries Superlink SC-WBGW256 Manual de usuario
ZyXEL Communications
ZyXEL Communications ZYWALL2 ET 2WE Manual de usuario
Telsey
Telsey CPVA 500 - SIP Manual de usuario
