Escali TASO Manual de usuario
Instruction Manual
Escali®
Measuring What’s Next TM
TASO: Mixing Bowl Scale
www.facebook.com/escali www.escali.com/qr006
2
Thank you for purchasing
the Escali Taso Digital Mixing Bowl Scale.
Please read the following operation information to
ensure the proper function of your new scale.
Initial setup
1) The bowl is detachable
for cleaning. Slide up the
button below the handle
to unlock and detach the
bowl from the base. For
normal operation, attach
the bowl to the base.
2) The battery door is
located at the front of the
base. Pull out the plastic
battery insulation tab.
Bottom view of scale.
3) Make sure your scale
is on a at surface. An
uneven surface might
cause the display to read
a warning message of
unSt (Unstable).
3
Power On/Off
Make sure the bowl is attached to the base. Place the
bowl scale on a at surface and press the Ø button to
turn on the unit. Hold the Ø button for 3 seconds to
turn off the unit. The unit turns off automatically after
5 minutes of non-use.
Weight Measurement
1) Select “SCALE” display mode by pressing the [m]
button repeatedly.
2) Press the [u] to change the weight unit between
gram or oz. if needed.
3) Place the ingredient into the bowl.
Volume Measurement
1) Select the ingredient between water, milk,
oil, sugar or our by pressing the [m] button
repeatedly.
2) Press the [u] to change to the desired unit if
needed.
3) Place the ingredient into the bowl.
4
NOTE: The volume measurement is converted from
the weight & the pre-set density programmed into
the scale. There are different types of milk, oil,
sugar or our on the market. Different types, brands
& origins of the same ingredient have different
densities. For this reason, some variations on the
volume measurement will occur depending on the
type of ingredients you are using. The volume reading
provided by the bowl scale can only be used as an
approximate value.
Add & Weigh (Tare) Function
It is easy and convenient to build up & mix different
ingredients together all in the same bowl. After the
rst ingredient is added and measured, you may add
another ingredient after resetting the scale to zero.
1) Place your rst ingredient into the bowl scale. Your
scale will weigh your rst ingredient.
2) Press Ø. TARE will show on the display, followed
by zero.
3) Place your second ingredient into the bowl scale.
Your scale will now weigh just your second
ingredient.
4) Repeat step 2 and 3 if needed.
Clearing the “Tare” feature
Remove all items from the bowl and press the Ø key.
Mixing (IMPORTANT NOTE)
It is easy and convenient to mix different ingredients
in the bowl scale. It can withstand up to 11 Lbs / 5
Kg of maximum load. When the total weight and force
during mixing is greater than 11 Lbs / 5 kg, the unit
5
will beep and display “Err”. Make sure to remove the
weight and stop the mixing action immediately.
Sensitive weight scale components are located at the
base of the scale and excessive force & weight applied
to the base may permanently damage the scale inside
and provide inaccurate reading. To extend product life
span, please detach the bowl to mix your ingredients.
Do not place overweight items in the
scale
Weighing items over the maximum weight capacity will
cause an overload error “Err” to display. Immediately
remove overweight items to avoid causing damage to
your scale.
Calibration
To ensure accurate measurement, you are suggested
to check the weight of the empty bowl scale every
time you rst turn on the unit. It should read zero.
Calibration for the bowl is needed ONLY when the
reading of your EMPTY bowl scale is not zero. The
calibration process will reset the reading to zero.
To calibrate:
1) Make sure the bowl is attached to the base and
the bowl is completely empty.
2) Turn on the unit by a single press of the Ø button.
3) Make sure the bowl scale is placed steadily on a
at surface. Hold Ø for approximately 6 seconds
until “CAL” ashes. Do not touch or move the bowl
scale when “CAL” is ashing.
4) The display reading will show “0” and the
calibration is completed.
6
Cleaning and storage
IMPORTANT: Never immerse the base & handle
in water or put it into a dish washing machine for
cleaning. Only the bowl that is detached from the base
is waterproof and dishwasher safe (top rack). Do not
use boiling water to clean the detached bowl. Use a
damp cloth to clean the base and the handle.
Battery Replacement
Replace the batteries when the low battery symbol
appears on the display. The battery compartment is
located at the front of the base of the scale. Slide out
the battery compartment (use a screwdriver when
needed). Replace 2 pieces of AAA batteries according
to the polarity indicated. Please dispose of old
batteries in an environmentally friendly manner.
Additional Information
1) Make sure your scale is at room temperature, and
on a stable horizontal surface free of vibration.
2) This scale is not waterproof. Do not expose to
moisture.
3) As this scale is a precision instrument, it must be
handled with extreme care. Avoid rough treatment,
shaking and vibration.
4) To extend the product life span, remove any items
from the bowl scale when it is not in use.
5) Do not disassemble this scale or the warranty will
be void.
6) Product may not function properly if it is subject
to electrical interference or high-frequency radio
transmissions.
7
Specications
Capacity:
5000 gram / 11 Pound / 2500 mL, 10 Cups, 90 Fl. oz.
Increments:
1 gram, 1/8 ounce, 1/8 cups, 1/8 . oz., 1 mL
Weight Modes:
Gram, Milliliters, Pounds+ounces, Fluid Ounces & Cups
Auto Shut Off:
Turns off after 5 minutes of non-use.
Power Source:
2 (two) AAA batteries
Escali’s liability is limited to two (2) times the cost of
the product.
www.escali.com
© Copyright Escali Corp., 2012
See www.escali.com for full details.
MODE BUTTON:
Switch between Scale Mode (for weight measurement) and
Volume Modes (Water, Milk, Oil, Sugar, Flour.)
UNIT BUTTON:
Switch units between Ounces, Grams, Milliliters, Fluid
Ounces and Cups. Units will differ per mode selected.
ON/OFF, ADD & WEIGH BUTTON:
• When the scale is off, press this button to turn the scale on.
• When the scale is on, press this button to use the
Add & Weigh (Tare) Feature.
• When the scale is on, press and hold this button (4 sec.)
to turn the scale off.
Button Reference
Tabla de contenidos
Otros manuales de Escala de Escali
Escali
Escali US200L Manual de usuario
Escali
Escali Track & Target USTT180 Manual de usuario
Escali
Escali Digital Scale Manual de usuario
Escali
Escali POP Manual de usuario
Escali
Escali Vera PR2000S Manual de usuario
Escali
Escali Lunar Blue Manual de usuario
Escali
Escali USHM180G Manual de usuario
Escali
Escali Pana Manual de usuario
Escali
Escali Vera PR2000S Manual de usuario
Escali
Escali XL180 Manual de usuario
Escali
Escali ECO200 Manual de usuario
Escali
Escali 157 Manual de usuario
Escali
Escali Vitra Manual de usuario
Escali
Escali Primo P115 Manual de usuario
Escali
Escali Aqua Manual de usuario
Escali
Escali BFBW200 Manual de usuario
Escali
Escali ECO180 Manual de usuario
Escali
Escali USHM180G Manual de usuario
Escali
Escali Argenta Digital Kitchen Scale Manual de usuario
Escali
Escali EW180 Manual de usuario
