Ergotron Peanut Manual de usuario

1 of 2

300-5611-00 rev. B • 06/16

Built with Anthro-DNA™

The Peanut

Product Part#

The Peanut PT1GMPW3

The Peanut for Tablets PT2GMPW3

For the latest User Installation Guide please visit: www.ergotron.com

User's Guide

NOTE: The Peanut, Tall, is shown. The tablet and keyboard are not included.

2 of 4

300-5611-00 rev. B • 06/16

TOOLS

The Peanut comes with these tools:

• 3-way wrench

Not provided, but suggested:

• 7/16" nut driver

• 3/8" nut driver

PARTS LIST

Before beginning assembly of The Peanut, please review

the parts list to verify that your shipment is complete.

Product Quantity Part Number

01 Shelf 1

for The Peanut 225-4834-00

for The Peanut for Tablets 225-4837-00

02 Handle (installed on shelf) 1 125-5411-00

03 Column Assembly 1

for The Peanut 500-1108-00

for The Peanut for Tablets 500-1109-00

04 Cable Sleeve 1 280-5056-00

05 Base 1 225-4833-00

06 Casters, Non-locking 2 150-5117-00

07 Casters, Locking 2 150-5118-00

08 1/4-20 Nylock Nut 24 325-5259-00

09 VESA Tilt Assembly 1 835-5639-00

for Peanut for Tablets

10 Easel Assembly 1 835-5640-00

for Peanut for Tablets

11 #10-24 x 0.75" Flat Head Screw 2 325-5270-00

for Peanut for Tablets (not shown)

For Peanut for Tablets:

3 of 2

300-5611-00 rev. B • 06/16

Locking Casters

1/4-20 Nylock Nuts

325-5259-00

1/4-20 Nylock Nuts

325-5259-00

1/4-20 Nylock Nuts

325-5259-00

#10-24 x 0.75” Flat-hd Screw

325-5270-00

STEP 1 - ATTACH THE CASTERS TO THE BASE

Lay the base upside down on work surface or oor.

Align the mounting holes in each caster plate with the bolts sticking

out of the base. Locking casters (with tabs as shown) attach to the

longer base legs.

Attach each caster with four nylock nuts using a 7/16" nut driver.

STEP 2 - ATTACH BASE TO THE COLUMN

Align mounting holes in base with bolts

sticking out of the bottom of the

column.

Attach the base with four nylock nuts

using a 7/16" nut driver.

STEP 3 - ATTACH SHELF TO COLUMN AND CABLE SLEEVE

Stand the column up on its casters.

Align mounting holes on column with

bolts in shelf so the handle is over the

locking casters.

Attach the shelf with four nylock nuts

using a 7/16" nut driver.

Slip the Cable Sleeve over the tube and

press into place.

STEP 4 - ATTACH VESA MOUNT TO COLUMN

Rotate VESA plate on mounting assembly so it can lay at.

Align mounting holes in mounting assembly with holes in top of

column.

Attach VESA mounting assembly with two hex bolts using 1/8" hex key.

4 of 4

300-5611-00 rev. B • 06/16

3/8” Acorn Nut

325-5023-00

All trademarks are the property of their respective companies. Anthro is a registered trademark and brand of Ergotron Inc.

Anthro-DNA is a trademark of Ergotron Inc.

STEP 5A - ATTACH DEVICE HOLDER TO VESA PLATE

Align device holder with the VESA plate so the four threaded studs on

the holder line up with four holes on the plate.

Attach the device holder to the plate with four acorn nuts using your

3/8" driver.

To adjust the device holder, loosen the adjustment knobs at the back of

the device holder, slide the top of the holder into position, then tighten

the knobs.

STEP 5B - ATTACH TABLET CASE TO VESA PLATE

Align the holes in the back of your tablet case with the four outer holes

in the VESA mount.

Attach monitor with mounting screws that come with the case.

CONGRATULATIONS! YOUR CART ASSEMBLY IS COMPLETE!

For local customer care phone numbers visit: http://contact.ergotron.com

For Service visit: www.ergotron.com

For Warranty visit: www.ergotron.com/warranty

Este manual sirve para los siguientes modelos

Otros manuales de Carrito para exteriores de Ergotron

Ergotron

Ergotron Dell Network Ready/Unmanaged Charging Cart 30... Manual de usuario

Ergotron

Ergotron CareFit Pro Manual de usuario

Ergotron

Ergotron ERGITD-013 Manual de usuario

Ergotron

Ergotron PS Laptop Cart Manual de usuario

Ergotron

Ergotron STYLEVIEW SV42-3262-1 Manual de usuario

Ergotron

Ergotron StyleView SV42 Manual de usuario

Ergotron

Ergotron STYLEVIEW SV42-3362-1 Manual de usuario

Ergotron

Ergotron ERGITD-010 Manual de usuario

Ergotron

Ergotron StyleView SV40-6100-0 Manual de usuario

Ergotron

Ergotron STYLEVIEW SV44-12C2-1 Manual de usuario

Ergotron

Ergotron SV44-1312-4 Manual de usuario

Ergotron

Ergotron SV Tablet Cart Manual de usuario

Ergotron

Ergotron YES36 Manual de usuario

Ergotron

Ergotron YES 35 Manual de usuario

Ergotron

Ergotron Styleview SV22-92026 Manual de usuario

Ergotron

Ergotron STYLEVIEW SV42-3162-1 Manual de usuario

Ergotron

Ergotron StyleView Manual de usuario

Ergotron

Ergotron ERGITD-015 Manual de usuario

Ergotron

Ergotron StyleView SV44 Manual de usuario

Ergotron

Ergotron STYLEVIEW SV44-22C2-1 Manual de usuario

Ergotron

Ergotron STYLEVIEW SV44-13C2-1 Manual de usuario

Ergotron

Ergotron STYLEVIEW SV42-7202-1 Manual de usuario

Ergotron

Ergotron StyleView SV42 Manual de usuario

Ergotron

Ergotron CareFit Slim LCD Cart with Drawer Manual de usuario

Manuales populares de Carrito para exteriores de otras marcas

Costway

Costway TH10057 Manual de usuario

Vivo

Vivo CART-PC02S Manual de usuario

VEVOR

VEVOR SC01 Manual de usuario

Carts Vermont

Carts Vermont 20 Manual de usuario

Vivo

Vivo CART-PC01 Manual de usuario

Costway

Costway TL0400 Manual de usuario

XPOtool

XPOtool 30261 Manual de usuario

Branick

Branick 130 Manual de uso y cuidado

Anthro

Anthro PrinterCart Manual de usuario

Westward

Westward 2CZY4 Manual de servicio

Hupfer

Hupfer TTW/V Manual de usuario

Gorilla Carts

Gorilla Carts GCR-10P Manual de usuario

Numatic

Numatic EcoMatic EM-5 Manual de usuario

Bosch

Bosch XL-Cart Instrucciones de montaje

Tennsco

Tennsco Modular Cart Top Component Assembly Manual de instrucciones

Makita

Makita DCU601 Manual de usuario

Clam

Clam POLAR TRAILER HD MAX Manual de usuario

Trinity

Trinity 1569839 Manual de usuario