Epson 1705C - PowerLite XGA LCD Projector Manual de usuario

Epson PowerLite 1705c Quick Start Guide

(adapted from the original http //files.support.epson.com/pdf/pl1705/pl1705qs.pdf

TURN ON YOUR EQUIPMENT

Connect the power cord to the back of the

projector and plug the other end into an

electrical outlet.

Open the A/V Mute slide. Make sure the

slide is opened completely.

To turn the projector on, press the

Power button on the projector or the

remote con

trol. The projector beep

and the projector’s Power light flashes

green and then stays on.

CAUTION Before unplugging the

projector…

Shut down the projector properly:

1. Press the Power bu

tton twice.

When the orange light stops flashing

and the projector beeps, you can unplug

the projector.

Epson PowerLite 1705c Quick Start Guide

(adapted from the original http //files.support.epson.com/pdf/pl1705/pl1705qs.pdf

Connect the power cord to the back of the

projector and plug the other end into an

Open the A/V Mute slide. Make sure the

To turn the projector on, press the

Power button on the projector or the

trol. The projector beep

s once,

and the projector’s Power light flashes

CAUTION Before unplugging the

Shut down the projector properly:

tton twice.

When the orange light stops flashing

and the projector beeps, you can unplug

ADJUST THE IMAGE

1. To raise the image,

press the blue foot

release button for th

and lift the front.

Release the button to

lock the foot in position.

Turn the focus ring to sharpen the image.

Turn the zoom ring to reduce or enlarge the

image.

If your image looks like

move the projector so that it is directly in

front of the screen, facing the screen

squarely.

If your image looks like

pres the or

projector to correct it.

(adapted from the original http //files.support.epson.com/pdf/pl1705/pl1705qs.pdf

)

press the blue foot

release button for th

e front adjustable foot

Release the button to

lock the foot in position.

Turn the focus ring to sharpen the image.

Turn the zoom ring to reduce or enlarge the

If your image looks like

move the projector so that it is directly in

front of the screen, facing the screen

If your image looks like

buttons on the

projector to correct it.

CHOOSE A PRESENTATION METHOD

“Tethered” (recommended when viewing video)

1. Make sure you’ve turned on the projector

and adjusted the image as described earlier.

2. Locate the computer cable that came with

the projector.

Connect one end to the projector’s blue

Computer (Component Video) port.

Connect the other end to the laptop’s video

out port (may also be blue) or monitor port.

3. Press the Source Search button on the

projector or the remote control and use the

directional arrow button to select

‘computer.’

4. If you see a blank or blue screen that reads

“No signal,” hold down the FN (function)

key on the keyboard and tap the F4 or F5

key ( ) until the image is on your

desktop as well as projecting to the screen.

(Allow a few seconds for the projector to

sync up.)

You may see this

“Wireless”

NOTES

Make sure the wireless module and the Easy MP (EMP

NS Connection) software has been installed and that the

projector is configured for our network.

Your computer must have a wireless card

or built

wireless connection.

Turn on the projector and adjust the image

as described earlier.

2. Press the Source Search

button on the

projector and use the directional arrow

button to select Easy MP

or press

on the projector’s remote control.

The projector displays a screen like this

From the start menu or desktop shortcut,

select EMP NS Connection.

If you see this screen

Select “Advanced

Connection Mode

“

Set the selected Connection Mode as the

default mode for future connections.”

Click K.

Make sure the wireless module and the Easy MP (EMP

NS Connection) software has been installed and that the

or built

-in

Turn on the projector and adjust the image

button on the

projector and use the directional arrow

or press

Easy MP

on the projector’s remote control.

The projector displays a screen like this

From the start menu or desktop shortcut,

Connection Mode

” and

Set the selected Connection Mode as the

default mode for future connections.”

If you see this screen,

5. You see this screen

Once the name of your projector appears,

select it and click

Connect

•

If a projector is “in use” and

“locked” to prevent interruption,

you won’t be able to select it.

•

If you see a message asking for a

keyword, enter the four digits that

appear on the

Screen

and click

You see the image on your monitor

transmitted to the projector and a

control bar appears on the computer

screen.

You can minimize this control bar to the

task bar.

When you’re finished with your

presentation, click

Disconnect

control bar.

Press the power button twice to turn off.

If you see this screen,

click Yes.

Once the name of your projector appears,

Connect

If a projector is “in use” and

“locked” to prevent interruption,

you won’t be able to select it.

If you see a message asking for a

keyword, enter the four digits that

appear on the

Easy MP Network

and click

You see the image on your monitor

transmitted to the projector and a

floating

control bar appears on the computer

You can minimize this control bar to the

When you’re finished with your

Disconnect

on the

Press the power button twice to turn off.

Otros manuales para 1705C - PowerLite XGA LCD Projector

Otros manuales de Proyector de Epson

Epson

Epson EMP 400W Manual de usuario

Epson

Epson EX21 Guía de referencia

Epson

Epson EB-96W Manual de usuario

Epson

Epson EB-X10 Manual de usuario

Epson

Epson EX3220 Guía de instalación

Epson

Epson EX5260 Pro Manual de usuario

Epson

Epson EMP 7800 Manual de usuario

Epson

Epson PowerLite W16SK Manual de usuario

Epson

Epson EB-1965 Manual de usuario

Epson

Epson EX5230 Manual de usuario

Epson

Epson EMP-X56 Manual de usuario

Epson

Epson EX6210 Hoja de especificaciones

Epson

Epson PowerLite 50c Manual de usuario

Epson

Epson PowerLite Home Cinema 5010 Instrucciones de funcionamiento y seguridad

Epson

Epson PowerLite 460 Manual de usuario

Epson

Epson EB-1850W Manual de usuario

Epson

Epson PowerLite S17 Manual del sistema

Epson

Epson EB-710Ui Manual de usuario

Epson

Epson PowerLite 8200i Hoja de especificaciones

Epson

Epson PowerLite 713c Manual de usuario

Epson

Epson EX30 Manual de usuario

Epson

Epson PowerLite 5000 Manual de usuario

Epson

Epson ELPDC05 - High Resolution Document Imager... Guía de referencia

Epson

Epson 1810p - PowerLite XGA LCD Projector Manual de usuario

Manuales populares de Proyector de otras marcas

iEmmet

iEmmet MP-312 Manual de usuario

Sony

Sony VPL-HS10 Marketing Specifications & Features Manual de usuario

Sony

Sony VPL-HW65ES Manual de servicio

Toshiba

Toshiba TLP-791U Manual de usuario

Philips

Philips LC1341 Guía de referencia

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Manual de usuario

NEC

NEC NP600S EDU Manual de usuario

BenQ

BenQ SH753P Manual de usuario

Eiki

Eiki EK-623U series Manual de usuario

Christie

Christie LHD700 Manual de usuario

Navitar

Navitar FX Manual de usuario

InFocus

InFocus LitePro 560 Manual de usuario

Sony

Sony SRX-R815P Manual de usuario

Vivitar

Vivitar DP1500 X Manual de usuario

Acer

Acer C20 Series Manual de usuario

Asus

Asus ZenBeam Latte Manual de usuario

BOXLIGHT

BOXLIGHT CP-322i/CP-634i Manual de usuario

JVC

JVC 1108TTH-AO-AO Manual de usuario