EOS Farblichtmodul Manual de usuario

Druck Nr. 29343325en/ - 43.06

Assembly instruction

Farblichtmodul

2GB

lInstallation of electrical equipment

should only be carried out by authorised

electrician.

lRegulations of public ullity (EVU) as well

as appropriate VDE-rules (DIN VDE

0100) must be abided.

lAttention! Danger for life! Please do not

repair and install the equipment yourself.

The cover should only be removed by

qualified personnel only!

lThe equipment should be disconnected

from all power system! Power supply and

fuses have to be switched off completely.

General security rules

Assembly the coloured light module in control unit EMOTEC HCS9003,

/ DC9000 / HIC 75 (ArtNr. 9427671)

plug socket

plug (double-pole)Connecting screws (3 parts)

Layout of coloured light module

Fig. 5

N (blue)

red

yellow

green

blue

Mounting of coloured light module (ArtNr. 942761)

in control unit EMOTEC HCS 9003

Please open the control unit just as described in the assembly instruction.

clamps for

supply lines

Fig 2

Fig. 3

pin border

Fig. 4

Please establish the electrical connection.

- The power supply line for the coloured

light module (longish wire) should be

connected with the clamps below the

transformer.

- The outgoing lines (shortish wire) should

be insert to the attached terminal. The

correct order of the wires has to access

to following colours (fig. 3):

N - red - yellow - green - blue

lease insert now the coloured light module

on to the plug border.

(blue)

red yellow green blue

4GB

safety

screws

plug border

Fig. 5

Fix the coloured light module with the

attached screw.

Attention:

Contact pins should catch the pin border.

Starting up

Please find the appliance of coloured light

modules in the instruction of the

appropriated control unit EMOTEC

HCS9003 / DC9000.

Fig. 6

Please press the mounting nib into the

inside with a flat screwdriver.

Pivot the upper part to open it.

Open the control unit

Remove the safety spinner

Remove the both safety spinner Àand Á

with a screwdriver.

The preparing for the instruction

ÀÁ

Fig. 7

Open the clamp plate

Lift the clamp plate and turn it up.

Fig. 8

Make plug connection

Connect the plug socket of coloured light

module with the pins of the plug at the

mainboard (fig. 9 and 11).

Fig. 9

plug socket (double-pole) pins

Connect the coloured light module to the

spacers with the 3 mounting screws.

Mounting of coloured light module

Fig. 10

mounting screws

6GB

Connect the plug

Insert the double-pole plug in the

appropriate socket at the mainboard (see

fig. 6) .

Install the clamp plate

Reinstall the clamp plate.

It must be catched into the 4 pins of the

plug.

Fig. 11

pins

Fig. 12

masked

Impress the safety spinner

Impress (tight fit) the both safety spinners

again.

ÀÁ

Fig. 13

Connection of cable

Please connect the cables with the upper

clamps sequential from left to right

according to the clamps inscription.

N - red- yellow - green - blue

Fig. 14

Mounting of coloured light

appliance

Fig. 15

Connect the coloured light appliance with

those clamps which are marked in the

figure according to the clamps inscription.

Please regard the connection schema at

fig.1.

Maximum allowable light power: 100 W

Close the upper cover

Please close the upper cover.

Fig. 16

Starting up

Please find the appliance of coloured light

modules in the instruction of the

appropriated control unit HIC 75.

Tabla de contenidos

Otros manuales de Unidad de control de EOS

EOS

EOS ECON S2 Manual de usuario

EOS

EOS EMOTEC DC 9000 Manual de usuario

EOS

EOS ECON H3 Guía del usuario

EOS

EOS EMOTEC DC 9000 Manual de usuario

EOS

EOS EMOTEC L 09 Relay Manual de usuario

EOS

EOS EMOTEC L 09 Guía de planificación

EOS

EOS EmoStyle Di Manual de usuario

EOS

EOS SBM GLT KNX Manual de usuario

EOS

EOS InfraTec Premium Guía del usuario

EOS

EOS ECON D2 Guía del usuario

EOS

EOS ECON A1 Manual de usuario

EOS

EOS ECON D4 Manual de lista de piezas

EOS

EOS InfraStyle Manual de usuario

EOS

EOS ECON H2 Manual de usuario

EOS

EOS ECON D1 Guía del usuario

EOS

EOS EmoTouch 3 Manual de usuario

EOS

EOS SBM-IR Modul Manual de usuario

EOS

EOS WCI-01 Manual de usuario

EOS

EOS Emotec D Manual de usuario

EOS

EOS ECON F1 Manual de usuario

EOS

EOS EMOTEC DC 9000 Manual de usuario

EOS

EOS 94 00 Series Manual de usuario

EOS

EOS ECON 45A2 Guía de planificación

EOS

EOS EmoTouch II + Manual del propietario

Manuales populares de Unidad de control de otras marcas

Festo

Festo Compact Performance CP-FB6-E Manual de lista de piezas

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manual de usuario

JS Automation

JS Automation MPC3034A Manual de usuario

JAUDT

JAUDT SW GII 6406 Series Guía rápida

Spektrum

Spektrum Air Module System Manual de usuario

BOC Edwards

BOC Edwards Q Series Manual de usuario

KHADAS

KHADAS BT Magic Manual de usuario

Etherma

Etherma eNEXHO-IL Manual de usuario

PMFoundations

PMFoundations Attenuverter Manual de usuario

GEA

GEA VARIVENT Manual de usuario

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manual de usuario

Altronix

Altronix LINQ8PD Instrucciones de montaje

Eaton

Eaton Powerware Series Manual de usuario

WAGO

WAGO 750-407/040-000 Manual de usuario

Sony

Sony CCU-590 Manual de usuario

Graco

Graco 25D614 Manual de usuario

Task Force Tips

Task Force Tips YE-RF-900 Manual de programación

Shini

Shini SPV-U Series Manual de usuario