Enterasys ENTERASYS ATX Manual de usuario

ATX User’s Guide

Notice

Enterasys reserves the right to make changes in speciﬁcations and other information contained in this

document without prior notice. The reader should in all cases consult Enterasys to determine whether

any such changes have been made.

The hardware, ﬁrmware, or software described in this manual is subject to change without notice.

IN NO EVENT SHALL ENTERASYS BE LIABLE FOR ANY INCIDENTAL, INDIRECT, SPECIAL, OR

CONSEQUENTIAL DAMAGES WHATSOEVER (INCLUDING BUT NOT LIMITED TO LOST

PROFITS) ARISING OUT OF OR RELATED TO THIS MANUAL OR THE INFORMATION

CONTAINED IN IT, EVEN IF ENTERASYS HAS BEEN ADVISED OF, KNOWN, OR SHOULD HAVE

KNOWN, THE POSSIBILITY OF SUCH DAMAGES.

Virus Disclaimer

Enterasys has tested its software with current virus checking technologies. However, because no anti-

virus system is 100% reliable, we strongly caution you to write protect and then verify that the

Licensed Software, prior to installing it, is virus-free with an anti-virus system in which you have

conﬁdence.

Enterasys makes no representations or warranties to the effect that the Licensed Software is virus-free.

Printed in the United States of America.

Order Number: 9031891-03 April 2000

Enterasys, Inc.

P.O. Box 5005

Rochester, NH 03866-5005

Enterasys,NetSight and Matrix E7 are trademarks of Enterasys. Cabletron Systems,SPECTRUM,

BRIM,DNI,FNB,INA,Integrated Network Architecture,LANVIEW,LANVIEW Secure,Multi

Media Access Center,MiniMMAC, and TRMM are registered trademarks, and Bridge/Router

Interface Modules,BRIM-A100,CRBRIM-W/E,CRXMIM,CXRMIM,Desktop Network Interface,

Distributed LAN Monitoring,Distributed Network Server,DLM,DNSMIM,E1000,E2000,E3000,

EFDMIM,EMM-E6,EMME,EPIM,EPIM-3PS,EPIM-A,EPIM-C,EPIM-F1,EPIM-F2,EPIM-F3,

EPIM-T,EPIM-T1,EPIM-X,ESXMIM,ETSMIM,ETWMIM,FDCMIM-04,FDCMIM-08,FDMMIM,

FDMMIM-04,Flexible Network Bus,FOMIM,FORMIM,HubSTACK,IRBM,IRM,IRM-2,IRM-3,

Media Interface Module,MicroMMAC,MIM,MMAC,MMAC-3,MMAC-3FNB,MMAC-5,

MMAC-5FNB,MMAC-8,MMAC-8FNB,MMAC-M8FNB,MMAC-Plus,MRX,MRXI,MRXI-24,

MultiChannel,NB20E,NB25E,NB30,NB35,NBR-220/420/620,RMIM,SecureFast Switch,

SecureFast Packet Switching,SFS,SFPS,SPECTRUM Element Manager,SPECTRUM for Open

Systems,SPIM-A,SPIM-C,SPIM-F1,SPIM-F2,SPIM-T,SPIM-T1,TPMIM,TPMIM-22,

TPMIM-T1,TPRMIM,TPRMIM-36,TPT-T,TRBMIM,TRMM-2,TRMMIM, and TRXI are

trademarks of Cabletron Systems, Inc.

AppleTalk, Apple, Macintosh, and TokenTalk are registered trademarks; and Apple Remote Access

and EtherTalk are trademarks of Apple Computer, Inc.

SmartBoost is a trademark of American Power Conversion

ST is a registered trademark and C++ is a trademark of AT&T

Banyan and VINES are registered trademarks of Banyan Systems, Inc.

cisco, ciscoSystems, and AGS+ are registered trademarks; and cBus, cisco Router, CRM, IGS, and MGS

are trademarks of cisco Systems, Inc.

GatorBox is a registered trademark; and GatorMail, GatorMIM, GatorPrint, GatorShare, GatorStar,

GatorStar GX-M, and XGator are trademarks of Cayman Systems, Inc.

CompuServe is a registered trademark of CompuServe Incorporated

X Window System is a trademark of Consortium, Inc.

CTERM, DECnet, and ULTRIX are registered trademarks; and DEC, DEC C++, DECnet-DOS,

DECstation, VAX DOCUMENT, VMA, and VT are trademarks of Digital Equipment Corporation

Fore Systems, ForeRunner, and ForeRunner ASX-100 are trademarks of Fore Systems, Inc.

PC/TCP is a registered trademark of FTP Software, Inc.

HP OpenView is a registered trademark of Hewlett-Packard, Inc.

AIX, IBM, OS/2, NetView, and PS/2 are registered trademarks; and AT, Micro Channel, PC, PC-DOS,

PC/XT, Personal Computer AT, Operating System/2, Personal System/2, RISC System/6000, and

Workplace Shell are trademarks of International Business Machines Corporation

i960 microprocessor is a registered trademark; and Intel and Multichannel are trademarks of Intel

Corporation

Microsoft, MS-DOS, and Windows are registered trademarks of Microsoft Corporation

Chameleon, ChameleonNFS, Chameleon 32, IPX/link, and NEWT are trademarks of

NETMANAGE, Inc.

NetWare and Novell are registered trademarks; and Internetwork Packet Exchange (IPX), IPX, and

Network File System (NFS) are trademarks of Novell, Inc.

Motif and MS are registered trademarks; and Open Software Foundation, OSF, OSF/1, and OSF/Motif

are trademarks of The Open Software Foundation, Inc.

Silicon Graphics and IRIS are registered trademarks; and Indigo and IRIX are trademarks of Silicon

Graphics, Inc.

NFS, PC-NFS, SPARC, Sun Microsystems, and Sun Workstation are registered trademarks; and

OpenWindows, SPARCstation, SPARCstation IPC, SPARCstation IPX, Sun, Sun-2, Sun-3, Sun-4,

Sun386i, SunNet, SunOS, SunSPARC, and SunView are trademarks of Sun Microsystems, Inc.

OPEN LOOK and UNIX are registered trademarks of Unix System Laboratories, Inc.

Ethernet, NS, Xerox Network Systems and XNS are trademarks of Xerox Corporation

iii

ANNEX, ANNEX-II, ANNEX-IIe, ANNEX-3, ANNEX-802.5, MICRO-ANNEX-XL, and MICRO-

ANNEX-ELS are trademarks of Xylogics, Inc.

MAXserver and Xyplex are trademarks of Xyplex, Inc.

Restricted Rights Notice

(Applicable to licenses to the United States Government only.)

1. Use, duplication, or disclosure by the Government is subject to restrictions as set forth in

subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer Software clause at DFARS

252.227-7013.

Enterasys, Inc., 35 Industrial Way, Rochester, New Hampshire 03867-0505.

2. (a) This computer software is submitted with restricted rights. It may not be used, reproduced, or

disclosed by the Government except as provided in paragraph (b) of this Notice or as otherwise

expressly stated in the contract.

(b) This computer software may be:

(1) Used or copied for use in or with the computer or computers for which it was acquired,

including use at any Government installation to which such computer or computers may

be transferred;

(2) Used or copied for use in a backup computer if any computer for which it was acquired

is inoperative;

(3) Reproduced for safekeeping (archives) or backup purposes;

(4) Modified, adapted, or combined with other computer software, provided that the

modified, combined, or adapted portions of the derivative software incorporating

restricted computer software are made subject to the same restricted rights;

(5) Disclosed to and reproduced for use by support service contractors in accordance with

subparagraphs (b) (1) through (4) of this clause, provided the Government makes such

disclosure or reproduction subject to these restricted rights; and

(6) Used or copied for use in or transferred to a replacement computer.

software, it is licensed to the Government, without disclosure prohibitions, with the minimum

rights set forth in paragraph (b) of this clause.

(d) Any other rights or limitations regarding the use, duplication, or disclosure of this computer

software are to be expressly stated in, or incorporated in, the contract.

(e) This Notice shall be marked on any reproduction of this computer software, in whole or in part.

Contents

Chapter 1 Introduction

Using the ATX Switch User’s Guide..........................................................................1-2

Related Manuals............................................................................................................1-2

Software Conventions ..................................................................................................1-3

Common ATX Switch Window Fields................................................................1-3

Using Window Buttons.........................................................................................1-4

Getting Help .................................................................................................................. 1-5

Using On-line Help................................................................................................ 1-5

Getting Help from the Global Technical Assistance Center ............................ 1-5

Chapter 2 The ATX Switch Chassis View

Viewing Chassis Information......................................................................................2-2

Front Panel Information........................................................................................ 2-3

Menu Structure.......................................................................................................2-4

Port Status Displays............................................................................................... 2-7

Selecting a Port Status View.......................................................................... 2-8

Port Status Color Codes................................................................................. 2-9

The Chassis Manager Window..........................................................................2-10

Viewing Hardware Types...................................................................................2-10

Interface Description.................................................................................... 2-11

Managing the Hub...................................................................................................... 2-12

IPX Routing........................................................................................................... 2-12

Conﬁguring IPX Routing on a port............................................................2-13

Selecting the Frame Type for a Port...........................................................2-13

IP Routing ............................................................................................................. 2-14

Conﬁguring the IP Address Table.............................................................. 2-15

Conﬁguring IP Routing on a Port ..............................................................2-15

Port Conﬁguration...............................................................................................2-16

Bridge Port Conﬁguration..................................................................................2-17

Setting the Bridge Mode.............................................................................. 2-18

Transmitting BPDUs..................................................................................... 2-19

Source Route Conﬁguration........................................................................2-19

Spanning Tree Explorer Modes...................................................................2-19

Setting the Spanning Tree Explorer Mode.........................................2-20

Token Ring Translation................................................................................2-20

Using the Find Source Address Feature...........................................................2-23

Contents

Viewing I/F Summary Information..................................................................2-23

Interface Performance Statistics/Bar Graphs...........................................2-25

Viewing Interface Detail ..............................................................................2-26

Making Sense of Detail Statistics.........................................................2-28

Enabling and Disabling Ports.............................................................................2-29

Administratively Enabling and Disabling Ports......................................2-29

Chapter 3 Using ATX Trunking

The Port Trunking Window.........................................................................................3-2

Enabling and Disabling Trunking .......................................................................3-4

Chapter 4 Using ATX Port Filtering

Port Filters Table Information......................................................................................4-3

Editing the Port Filters Table.......................................................................................4-4

Adding a New Filter..............................................................................................4-5

Deleting a Port Filter............................................................................................4-10

Viewing Filter Statistics..............................................................................................4-10

Chapter 5 Workgroup Conﬁguration

Conﬁguring a Workgroup............................................................................................5-4

Deleting a Workgroup...........................................................................................5-5

Chapter 6 ATX Port Mirroring

The Port Mirroring Window........................................................................................6-2

Conﬁguring Port Mirroring..................................................................................6-3

If the port(s) being mirrored and the diagnostics port are both local.....6-4

If the port(s) being mirrored are remote......................................................6-4

From the device where the mirrored ports are located......................6-4

Chapter 7 IPX Routing Tables

IPX Statistics...................................................................................................................7-2

IPX Interface............................................................................................................7-2

IPX Route.................................................................................................................7-3

IPX SAP ...................................................................................................................7-4

Index

1-1

Chapter 1

Introduction

How to use this guide; related guides; software conventions; getting help; ATX Switch ﬁrmware version

information

Welcome to the NetSight Element Manager for the ATX User’s Guide. We have

designed this guide to serve as a simple reference for using NetSight Element

Manager for the ATX Switch.

The ATX Switch comprises a ﬁve-slot chassis along with a high-capacity Packet

Processing Engine (PPE), which occupies an additional top slot. The ATX Switch

is a multiprotocol LAN switch that enables high-bandwidth switching between

Ethernet, Token Ring, FDDI and 100Base-T LANs, with full connectivity to ATM.

The PPE uses a dual RISC processor design combined with specialized switching

hardware to provide wire-speed performance, the intelligence to manage the

bandwidth gained through switching, and the ability to perform core switching

functions (e.g., bridging, routing, programmable ﬁltering, and statistics

gathering).

Up to ﬁve modules in any combination can be installed in the ATX Switch chassis,

including Ethernet, Token Ring, FDDI, Fast Ethernet, and ATM modules. The

individual modules, each with at least one RISC CPU of its own, handle interface

control and translation functions at the port level.

The ATX, with its 1.6 Gbps internal bandwidth, combined with each LAN

module’s 400 Mbps bandwidth, offers a total system bandwidth exceeding 3.6

Gbps.

Introduction

1-2 Using the ATX Switch User’s Guide

Using the ATX Switch User’s Guide

Each chapter in this guide describes one major functionality or a collection of

several smaller functionalities of the ATX Switch. This guide contains information

about software functions which are accessed directly from the device icon; for

information about functions which are accessed via the NetSight Element

Manager platform, consult the User’s Guide and Tools Guide both of which are

included in this package.

Chapter 1, Introduction, provides a list of related documentation, describes

certain software conventions, and shows you how to contact the Enterasys Global

Call Center.

Chapter 2, The ATX Switch Chassis View, describes the visual display of the ATX

Switch and explains how to use the mouse within the Chassis View; the operation

of enabling and disabling ports is also described here.

Chapter 3, Using ATX Trunking, describes the trunking table and how to enable

and disable trunking on each interface on your ATX.

Chapter 4, Using ATX Port Filtering, describes how to use the Port Filtering

window to create custom ﬁlters and discard or forward trafﬁc based on the

speciﬁed criteria.

Chapter 5, Workgroup Conﬁguration, describes how to set up virtual work

groups on your ATX.

Chapter 6, ATX Port Mirroring, provides instructions for setting up port

mirroring on your ATX; you can conﬁgure a diagnostic port as either a local port

or a remote port on another ATX in your network.

Chapter 7, IPX Routing Tables, describes the IPX Tables window, which contains

statistics about IPX Routing on your ATX.

Chapter 8, ATX Bridging, provides a comprehensive look at all management

options associated with the bridge portion of the ATX, including Spanning Tree,

and the Filtering Database.

We assume that you have a general working knowledge of Ethernet IEEE 802.3,

Token Ring, Fast Ethernet, and FDDI type data communications networks and

their physical layer components, and that you are familiar with general bridging

and switching concepts.

Related Manuals

The ATX Switch user’s guide is only part of a complete document set designed to

provide comprehensive information about the features available to you through

NetSight Element Manager. Other guides which include important information

related to managing the ATX Switch include:

Tabla de contenidos

Otros manuales de Cambiar de Enterasys

Enterasys

Enterasys Vertical Horizon VH-2402S Manual de usuario

Enterasys

Enterasys Matrix 2G4072-52 Manual de usuario

Enterasys

Enterasys Matrix 7H4385-49 Manual

Enterasys

Enterasys G3G124-24 Manual de usuario

Enterasys

Enterasys SmartSwitch 2200 Series 2E253 Manual de usuario

Enterasys

Enterasys B5G124-24P2 Manual de usuario

Enterasys

Enterasys C5G124-24 Manual de usuario

Enterasys

Enterasys SecureStack B3G124-24 Manual de usuario

Enterasys

Enterasys Vertical Horizon VHIM100-S2MFX 100BASE FX-SC Manual de usuario

Enterasys

Enterasys S Series Manual

Enterasys

Enterasys Matrix-V V2H124-24 Manual

Enterasys

Enterasys SecureStack B2 B2G124-48P Manual

Enterasys

Enterasys Enterasys Gold Distributed Forwarding Engine... Manual

Enterasys

Enterasys Matrix 7H4202-72 Manual

Enterasys

Enterasys Matrix 7G4282-41 Manual

Enterasys

Enterasys 2H252-25R Manual de operación

Enterasys

Enterasys RoamAbout RBT-8200 Manual de usuario

Enterasys

Enterasys Enterasys Gold Distributed Forwarding Engine... Manual

Enterasys

Enterasys Mid-Span Power Hub Manual de usuario

Enterasys

Enterasys SecureStack C3 C3G124-24P Manual de usuario

Enterasys

Enterasys D-Series Manual de instrucciones

Enterasys

Enterasys SecureStack C2 C2G124-48P Manual

Enterasys

Enterasys SecureStack C3K122-24 Manual

Enterasys

Enterasys Matrix E5 5H153-50-G Manual de usuario

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Ruijie

Ruijie RG-PF2920 Series Manual de instalación y funcionamiento

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario