Enterasys 2E42-27 Documento técnico

PN 9033215 B-1

APPENDIX B

FLASH DOWNLOAD CONFIGURATION SCREEN

Firmware revision 4.10 changed the FLASH Download Conﬁguration

screen to allow conﬁguring the SmartSwitch device to upload or

download a conﬁguration ﬁle to or from a TFTP server.

This appendix applies to the SmartSwitch devices (standalone and

modules) that have ﬁrmware revision 4.10 and above, and supersedes the

FLASH Download Conﬁguration screen description contained in the

following documents:

•

SmartSwitch Series 2E42, 2E43, 2E48, 2E49, 2H22, 2H23, 2H28,

2H33 and 2M46 Local Management Supplement

(9032971-01)

•

SmartSwitch Series 6E122, 6E123, 6E128, 6E129, 6E132, 6E133,

6E138, 6E139, 6H122, 6H123, 6H128, 6H129, 6H133, and 6M146

Local Management Supplement

(9033026-01)

B.1 FLASH DOWNLOAD CONFIGURATION SCREEN

When to Use

To perform the following:

•

download a new ﬁrmware image ﬁle from a TFTP server to the

SmartSwitch device,

•

download a conﬁguration ﬁle from a TFTP server to the SmartSwitch

device, or

•

upload the conﬁguration ﬁle from the SmartSwitch device to a TFTP

server.

NOTE

To force an image download by changing the position of Switch

6 located inside the device, refer to your SmartSwitch device

user’s guide for details.

Appendix B:

LM Security Screens

B-2 PN 9033215

Before downloading an image to the device, copy the image to the

network TFTP server.

The download and upload conﬁguration capability enables customer

conﬁgurable settings to be copied from one SmartSwitch device to

another via the TFTP server, according to the rules described in this

section. The conﬁguration ﬁle can also be stored on the TFTP server to

prevent loosing the conﬁguration values while performing maintenance

on the SmartSwitch device. After the maintenance is completed, the

conﬁguration values can be downloaded to the same SmartSwitch device.

NOTE

For information on how to set up a workstation as a TFTP

server, refer to the speciﬁc workstation documentation.

NOTE

Conﬁguration ﬁles cannot be downloaded or uploaded directly

from one SmartSwitch device to another.

FLASH Download Conﬁguration Screen

PN 9033215 B-3

How to Access

Use the arrow keys to highlight the

FLASH DOWNLOAD

CONFIGURATION

menu item in the Device Conﬁguration Menu

screen, and press ENTER. The Flash Download Conﬁguration screen

(Figure B-1) displays.

Screen Example

Figure B-1 Flash Download Conﬁguration Screen

Download Method:

Reboot After Download:

TFTP Gateway IP Addr:

Download Server IP:

Download File Name:

Last Image Server IP:

Last Image File Name:

Transfer Status:

25044-49w

[RUNTIME]

[YES]

nnn.nnn.nnn.nnn

/tftpboot/SS2200.fls

nnn.nnn.nnn.nnn

/tftpboot/SS2200.fls

Download Successful

RETURN

EXECUTE EXIT

Appendix B:

LM Security Screens

B-4 PN 9033215

Field Deﬁnitions

Refer to Table B-1 for a functional description of each screen ﬁeld.

Table B-1 Screen Field Descriptions

Use this ﬁeld… To…

Download

Method

(Selectable)

Select a method (RUNTIME, DOWNLOAD

CONFIG, or UPLOAD CONFIG) to download

(receive) an image ﬁle from a TFTP server, or

upload (transmit) or download a conﬁguration ﬁle

to/from a TFTP server. The uploading and

downloading of a conﬁguration ﬁle is

accomplished according to the IP address and the

ﬁle name entered in the Download Server IP and

Download File Name ﬁelds, respectively.

RUNTIME

– Used to download a new image

from a TFTP server. This allows the replacement

of the image ﬁle currently stored in the

SmartSwitch device. Section B.1.1 describes how

to download using Runtime.

DOWNLOAD CONFIG

– Used to download a

conﬁguration ﬁle from a TFTP server to a

SmartSwitch device. The conﬁguration ﬁle must

be one that was uploaded to the TFTP server from

a SmartSwitch device of the same model with the

same optional hardware, and running ﬁrmware

revision 4.10 or higher.

The SmartSwitch device automatically reboots

after a successful download. Section B.1.2

describes how to download a conﬁguration ﬁle.

UPLOAD CONFIG

– Used to upload a

conﬁguration ﬁle from a SmartSwitch device to a

TFTP server. The conﬁguration ﬁle must be one

that was downloaded to a SmartSwitch device of

the same model with the same optional hardware,

and running ﬁrmware revision 4.10 or higher.

Section B.1.3 describes how to download using

TFTP.

FLASH Download Conﬁguration Screen

PN 9033215 B-5

Reboot After

Download

(Toggle)

Set the SmartSwitch device so it will either reboot

or not reboot after completing the download of an

image. This ﬁeld toggles betweenYES and NO,

when the Download Method ﬁeld is set to

RUNTIME.

IfYES is selected, the device reboots after the

download is completed. If NO is selected, the

device continues using the existing ﬁrmware

image and stores the new ﬁrmware image in

FLASH memory. The next time the SmartSwitch

device is reset or powered-up, the device boots

from FLASH memory using the new image.

When the Download Method ﬁeld is set to

DOWNLOAD CONFIG, the setting defaults to

YES and cannot be changed. In UPLOAD

CONFIG, the setting defaults to NO and cannot be

changed.

TFTP Gateway

IP Addr

(Modiﬁable)

Enter the IP address of the TFTP gateway server

deﬁned on the General Conﬁguration screen in the

local management supplement.

Download

Server IP

(Modiﬁable)

Select the IP address of the TFTP server to be used

for the download or upload.

Download File

Name

(Modiﬁable)

Select the complete TFTP server path and ﬁle

name of the new image or conﬁguration ﬁle.

Last Image

Server IP

(Read-Only)

See the IP address of the server used for the

previous download or upload.

Last Image File

Name

(Read-Only)

See the complete path and ﬁle name of the last

downloaded image.

Table B-1 Screen Field Descriptions (Cont’d)

Use this ﬁeld… To…

Appendix B:

LM Security Screens

B-6 PN 9033215

B.1.1 Image File Download Using Runtime

To download a ﬁrmware image ﬁle to the SmartSwitch device using

Runtime, proceed as follows:

Use the arrow keys to highlight the

Reboot After Download

field.

Use the SPACE bar to select either

YES

. Select

YES

if you

want the device to reboot after the download is completed. Select

if you want the device to store the new image in FLASH memory until

the device is reset or during the next power-up.

Use the arrow keys to highlight the

TFTP Gateway IP Addr

field.

Set the IP address of the TFTP gateway (this defaults to the same IP

address as that set in the TFTP Gateway IP Addr field on the General

Configuration screen).

Use the arrow keys to highlight the

Download Server IP

field.

Enter the IP address of the TFTP server using the DDN format.

For example:

nnn.nnn.nnn.nnn

Use the arrow keys to highlight the

Download File Name

field.

Enter the complete pathway and file name of the image stored on the

download server.

For example:

/tftpboot/SS2200.fls

Usethearrowkeystohighlight

EXECUTE

atthebottomofthescreen

and press ENTER. If Reboot After Download is set to

in step 2,

the message “RUNTIME DOWNLOAD IN PROGRESS” displays in

the event message line at the top of the screen and the new image is

downloaded into FLASH memory. If Reboot After Download is set to

YES

in step 2, the message “REBOOT WILL OCCUR AFTER

DOWNLOAD COMPLETES” displays.

During the downloading process, the screen displays the Download

Block Count (the number of frames received).

Transfer Status

(Read-Only) See the status of the current or most recent

download or upload.

Table B-1 Screen Field Descriptions (Cont’d)

Use this ﬁeld… To…

FLASH Download Conﬁguration Screen

PN 9033215 B-7

B.1.2 Conﬁguration File Download UsingTFTP

To download a conﬁguration ﬁle from a TFTP server to the SmartSwitch

device, proceed as follows:

Use the arrow keys to highlight the

Download Method

field.

Use the SPACE bar to select

DOWNLOAD CONFIG

Use the arrow keys to highlight the

TFTP Gateway IP Addr

field.

Set the IP address of the TFTP gateway (this defaults to the same IP

addressas that setin the

TFTPGatewayIP Addr

field on theGeneral

Configuration screen).

Use the arrow keys to highlight the

Download Server IP

field.

Enter the IP address of the TFTP server using the DDN format.

For example:

nnn.nnn.nnn.nnn

Use the arrow keys to highlight the

Download File Name

field.

Enter the complete pathway and file name of the image stored on the

download server.

Usethearrowkeystohighlight

EXECUTE

atthebottomofthescreen

and press ENTER. The message “DOWNLOADING

CONFIGURATION. REBOOT WILL OCCUR WHEN

DOWNLOAD COMPLETES.” displays in the event message line at

the top of the screen and the configuration file is downloaded to the

SmartSwitch device from the TFTP server.

NOTE

When DOWNLOAD CONFIG is selected, the Reboot After

Download ﬁeld is automatically set toYES (and cannot be

changed), so that the SmartSwitch device automatically

reboots after a successful download.

Appendix B:

LM Security Screens

B-8 PN 9033215

B.1.3 Conﬁguration File Upload UsingTFTP

To upload a conﬁguration ﬁle to a TFTP server, proceed as follows:

Use the arrow keys to highlight the

Download Method

field.

Use the SPACE bar to select

UPLOAD CONFIG

Use the arrow keys to highlight the

TFTP Gateway IP Addr

field.

Set the IP address of the target TFTP server which is to receive a copy

of the SmartSwitch device conﬁgurable settings.

Use the arrow keys to highlight the

Download Server IP

field.

Enter the IP address of the target TFTP server using the DDN format.

For example:

nnn.nnn.nnn.nnn

Use the arrow keys to highlight the

Download File Name

field.

Enter the complete pathway and file name of the configuration file in

the SmartSwitch device.

Usethearrowkeystohighlight

EXECUTE

atthebottomofthescreen

and press ENTER. The message “UPLOAD CONFIGURATION IN

PROGRESS” displays in the event message line at the top of the

screen and the SmartSwitch device configuration file is uploaded to

the TFTP server.

NOTE

When Upload Conﬁg is selected, the Reboot After Download

ﬁeld is automatically set to NO (and cannot be changed).

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Cambiar de Enterasys

Enterasys

Enterasys SecureStack A2 A2H123-24 Manual

Enterasys

Enterasys FN10 Manual

Enterasys

Enterasys I3H252-12TX Manual de usuario

Enterasys

Enterasys SecureStack C3 C3G124-24 Manual de usuario

Enterasys

Enterasys B5G124-24 Manual

Enterasys

Enterasys 2H25x Manual de usuario

Enterasys

Enterasys RoamAbout RBT-8100 Manual de usuario

Enterasys

Enterasys SmartSwitch 2200 Manual del propietario

Enterasys

Enterasys 7100G Series Manual

Enterasys

Enterasys RoamAbout RBT-8110 Manual de usuario

Enterasys

Enterasys Matrix-V V2H124-24 Manual

Enterasys

Enterasys C5G124-24 Manual de usuario

Enterasys

Enterasys SecureStack C2 C2G124-48P Manual

Enterasys

Enterasys Matrix E1 1G694-13 Manual de usuario

Enterasys

Enterasys VH-4802 Manual de usuario

Enterasys

Enterasys Matrix 7G4282-41 Manual

Enterasys

Enterasys Vertical Horizon VH-2402S2 Manual

Enterasys

Enterasys Vertical Horizon VH-8G Manual de programación

Enterasys

Enterasys SSR-GTX32-04 Manual de usuario

Enterasys

Enterasys Vertical Horizon VH-2402S Cómo utilizar

Enterasys

Enterasys Vertical Horizon VHIM1000-S1TX Manual de usuario

Enterasys

Enterasys SecureStack A2 A2H254-16 Manual

Enterasys

Enterasys SecureStack A2 A2H124-24P Manual de usuario

Enterasys

Enterasys I Series Manual

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Ruijie

Ruijie RG-PF2920 Series Manual de instalación y funcionamiento

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario