ennoLogic eL200K Manual de usuario
ENNOLOGIC LIGHT METER EL200K-QUICK-START GUIDE 1
Install the Batteries
Use a screwdriver to unscrew the battery compartment
cover on the back of the unit and insert the four AA
batteries included in the package. Make sure the
polarity is correct (match the positive and negative
terminals according to the diagram inside
the battery compartment.)
Reinstall the battery cover.
Open the Package
When you open the package, you should
nd your manual, your light meter, its
carrying case, an analog output interface
cable, and 4x AA batteries. The manual is
located inside the lid, behind the foam.
1
2
EnnoLogic Light Meter eL200K
Quick-Start Guide
WHEN YOUR LIGHT METER ARRIVES
ENNOLOGIC LIGHT METER EL200K-QUICK-START GUIDE 2
Turning the Light Meter On and Off
Press the POWER key to turn the meter on.
Press it again to turn it o.
After 5 minutes without use the meter will
automatically power o.
Switching Units
Press the UNITS key to switch between Fc
(foot candle) and Lux.
Backlight
Press the BACKLIGHT key to turn
the backlight on or o.
Tracking the Maximum,
Minimum and Average Values
Press the MAX key to capture the maximum light
intensity. The reading will remain unchanged until
a higher reading is detected. Press the MAX key
again to capture the minimum reading (MIN), and
press it again to display average readings (AVG).
Press the MAX key one more time to exit this
mode.
TAKE IT FOR A SPIN
WANT TO LEARN MORE?
You’ll nd more information in the
user manual downloadable at our website.
QUESTIONS? NEED ADDITIONAL SUPPORT?
(541) 525-9175
ENNOLOGIC LIGHT METER EL200K-QUICK-START GUIDE 3
Hold Function
Press the HOLD key to enter and exit data hold
mode. When in Hold mode, the displayed value will
no longer update.
Disable Auto-Power-Off
To disable the Auto-Power-O feature hold the
UNITS key down while turning the meter on, then
release the UNITS key. You will see the Power symbol
appear on the LCD, indicating that the auto-power-o
feature has been disabled.
ADVANCED FEATURES
External Power
The unit can be powered with the USB cable provided, connected to
a standard USB power adapter or port.
Tabla de contenidos
Otros manuales de Instrumento de medición de ennoLogic
ennoLogic
ennoLogic eL200K Manual de usuario
ennoLogic
ennoLogic eS528L Manual de usuario
ennoLogic
ennoLogic eA980R Manual de usuario
ennoLogic
ennoLogic eA990R Manual de usuario
ennoLogic
ennoLogic eS440A Manual de usuario
ennoLogic
ennoLogic eA980R Manual de usuario
ennoLogic
ennoLogic eH710T Manual de usuario
Manuales populares de Instrumento de medición de otras marcas
Endress+Hauser
Endress+Hauser Proline Promag 50 Especificaciones técnicas
Siemens
Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas
KLINGER
KLINGER CMF V Series Manual de usuario
EXFO
EXFO FTB-2 Manual de operación y mantenimiento
Keysight
Keysight M8290A Manual de usuario
ADTEK
ADTEK MW-5 Manual de usuario