Engcon GRB1250 Manual de usuario
User manual
Grading beam
GRB1250 | GRB1500L | GRB1500 | GRB2000 | GRB2500 | GRB3000
Article 9000372 | Version 1.1
Original Instructions
Preface
Preface
Dear Customer,
Thank you for choosing a product from engcon.
engcon is the market leader in tiltrotators and tools for excavators. We represent
innovation, knowledge and experience, and we develop our products with a focus on the
customer's needs. Please visit our website for contact information and details about the
rest of our product range.
www.engcon.com
2
Table of Contents
Table of Contents
1. Introduction
1.1. General............................................................................................................ 4
1.2. Scrapping and recycling.................................................................................. 4
1.3. Warranty.......................................................................................................... 5
1.4. Technical support and spare parts.................................................................. 5
2. Safety
2.1. General............................................................................................................ 6
3. Design and function
3.1. General............................................................................................................ 7
3.2. Adjusting the compactor roller (GRB1250 / GRB1500L).................................8
3.3. Adjusting the compactor roller (miscellaneous)...............................................11
3.4. Extending side beams.....................................................................................12
4. Maintenance
4.1. Lubrication every 80 operating hours..............................................................13
4.1.1. Grading beam lubrication.........................................................................13
4.2. Tightening torque.............................................................................................13
5. Technical data
5.1. Grading beam..................................................................................................14
3
1 Introduction
1. Introduction
1.1. General
This user manual contain important information about your product's functions and
characteristics, and how to use it in the best way. Before you begin using the product, it is
important that you read and understand the content of these instructions, especially the
sections that address safety.
In addition to these instructions, you must study and understand the applicable safety
information for the relevant base machine as well as any other equipment involved.
The user manual is supplied with supplementary documentation providing more detailed
descriptions of the installation, fitting, operation and maintenance of control systems and
custom modifications for your specific product.
Information, images, illustrations and specifications used in the instructions are based
on product information that was available at the time of going to press. Images and
illustrations used in the instructions are typical examples and not intended to be exact
depictions of various part of the product. We reserve the right to make changes without
prior notice.
Always store the user manual together with any other supplementary information in a safe
manner and such that it is always available.
1.2. Scrapping and recycling
engcon makes constant efforts to reduce its environmental impact. engcon's products
comprise at least 99 per cent recyclable material. All assembly and service work must
take place in compliance with legislation and ordinances governing the environment,
health and occupational safety. This refers to all work with residual materials including
handling, storage and processing. To prevent contamination of soil and water, spillages
must be avoided. Should a spillage occur, it must be dealt with.
Hazardous waste may only be disposed of by those authorised to do so. All waste
produced must be disposed of in compliance with applicable legislation and ordinances:
- Metal and plastics to be recycled.
- Hydraulic hoses are normally used for energy recovery (sort as hazardous waste).
- Oils and greases are normally used for energy recovery (sort as hazardous waste).
- Electronic components to be recycled for materials (sort as hazardous waste).
- Packaging to be sorted at source and recycled for materials.
- Paper to be sorted at source and recycled for materials.
If in doubt, contact the environmental manager at engcon.
4
1 Introduction
1.3. Warranty
This product was designed, dimensioned and manufactured by engcon. It is forbidden
to modify, alter or convert this product such that it no longer corresponds to the
manufacturer's specifications. When replacing parts or making repairs, contact an
authorized workshop.
Warranty: One (1) year providing the product has not been subjected to abuse or other
abnormal operation.
1.4. Technical support and spare parts
Contact information for support and spare parts can be found at www.engcon.com.
5
2 Safety
2. Safety
2.1. General
It is important that you read and understand all warnings prior to installation work on this
product or before you use it and any accessories supplied. The warning texts highlight
potential risks and describe how to avoid them. The following warning levels are used in
this user manual:
DANGER
Indicates that an accident will occur if the regulation is
not followed. Risk of personal injury or death.
WARNING
Indicates that an accident may occur if the regulation
is not followed. Risk of personal injury or death.
CAUTION
Indicates that an accident may occur if the regulation
is not followed. Risk of personal injury.
IMPORTANT
Indicates that an accident may occur if the regulation is
not followed. Risk of damage to property, process or the
surroundings.
REMARKS
Specifies additional information that may make performance or
understanding of specific operations easier.
6
3 Design and function
3. Design and function
3.1. General
With engcon’s grading beam, you can grade large areas quickly and efficiently.
The grading beam is a smart, flexible solution that uses a bolt-on bracket/attachment point
with the same bolt pattern as other tools (e.g. stone and sieve grabs, compactors, and
rotating brushes) from engcon.
Side beams can be extended with bolt-on 500 mm extensions.
Advantages
- Robust design
- Bolt-on bracket/attachment point
- Cutters at the leading edge
- Wear bars under the entire structure
- Extendable side beams
- Journalled compactor roller
- Compactor roller can be raised and lowered
- Bolt-on bracket/attachment point makes switching brackets easy
NOTE. while the engcon grading beam is even more efficient when used with a tiltrotator,
it is then important to consider the loads the tiltrotator will be subjected to. Use the grading
beam for its intended purpose – grading. Large quantities of material can be moved
quickly and efficiently with engcon’s range of buckets.
DANGER
Do not exceed tipping load limits. The weight of the
product and the increased reach may impair stability.
Risk of personal injury and damage to property.
WARNING
The grading beam may not be used as a support for
lifting the base machine.
7
3 Design and function
3.2. Adjusting the compactor roller (GRB1250 / GRB1500L)
The compactor roller is journalled and can be raised and lowered to achieve the best
setting for your prevailing needs.
Change the compactor roller height setting as follows:
- Undo the bolts that hold the compactor roller's shaft bearings in place.
- Remove the spacer from the top of the frame.
8
3 Design and function
- Place the spacer between the shaft bearing and the frame.
- Reinstall the bolts that hold the compactor roller's shaft bearings in place.
9
3 Design and function
- The compactor roller's position is now 10 mm lower than the frame.
10
Este manual sirve para los siguientes modelos
5
Tabla de contenidos
Otros manuales de Equipos de construcción de Engcon
