Engcon EC319 Manual de usuario
User manual
TILTROTATOR
EC319
Article 9000682 | Version 1.2
Original Instructions
Preface
Preface
Dear Customer,
Thank you for choosing a product from engcon.
engcon is the market leader in tiltrotators and tools for excavators. We represent
innovation, knowledge and experience, and we develop our products with a focus on the
customer's needs. Please visit our website for contact information and details about the
rest of our product range.
www.engcon.com
2
Table of Contents
Table of Contents
1. Introduction
1.1. General............................................................................................................ 5
1.2. Scrapping and recycling.................................................................................. 5
1.3. Transport and storage..................................................................................... 5
1.3.1. Temperature during operation and storage..............................................6
1.4. Warranty.......................................................................................................... 6
1.5. Technical support and spare parts.................................................................. 6
1.6. Product approval............................................................................................. 7
1.6.1. EU Declaration of Conformity.................................................................. 7
2. Safety
2.1. General............................................................................................................ 8
3. Design and function
3.1. General............................................................................................................ 9
3.2. Tool(s).............................................................................................................. 9
3.3. Q-Safe............................................................................................................. 9
3.3.1. Overview.................................................................................................. 10
3.4. EC-Oil.............................................................................................................. 11
4. Installation
4.1. Oil.................................................................................................................... 12
4.2. Identification.....................................................................................................13
4.3. Electrical and hydraulics..................................................................................13
4.3.1. Q-Safe......................................................................................................14
4.4. On completion................................................................................................. 14
4.4.1. Apply decals.............................................................................................14
4.4.2. Function check.........................................................................................14
5. Operation
5.1. Before and during use.....................................................................................15
5.2. Lifting points.................................................................................................... 16
5.3. Tool(s).............................................................................................................. 16
5.3.1. Hydraulic hammers.................................................................................. 16
5.3.2. Augers......................................................................................................16
5.3.3. Pallet forks............................................................................................... 16
5.3.4. Crane boom............................................................................................. 17
5.4. Manoeuvring.................................................................................................... 17
5.4.1. DC3 Control System................................................................................17
5.5. Changing tools.................................................................................................17
5.6. Work under water............................................................................................17
5.6.1. Before performing work under water....................................................... 17
5.6.2. After performing work under water.......................................................... 18
6. Maintenance
6.1. General............................................................................................................ 19
3
Table of Contents
6.2. Daily inspections..............................................................................................20
6.3. Tiltrotator lubrication........................................................................................ 21
6.3.1. Grease recommendation......................................................................... 21
6.3.2. Lubrication every 8 operating hours........................................................ 21
6.3.3. Worm gear lubrication..............................................................................23
6.4. Service every 250 operating hours................................................................. 23
6.4.1. Shimming, tilt upper section.................................................................... 23
6.5. Special maintenance....................................................................................... 24
6.6. Breakout play and rotational play....................................................................25
6.6.1. Checking lateral play............................................................................... 26
6.6.2. Checking rotational play.......................................................................... 27
6.6.3. Thrust washers........................................................................................ 28
6.6.4. ePS.......................................................................................................... 28
6.7. Testing load-holding valves............................................................................. 28
6.8. Tightening torque.............................................................................................28
7. Troubleshooting
7.1. Q-Safe............................................................................................................. 30
7.1.1. Indications................................................................................................ 30
8. Decals
8.1. Warning decals................................................................................................32
8.1.1. Warning decals in cab............................................................................. 32
8.1.2. Warning decals on product......................................................................32
8.1.3. Symbol legend......................................................................................... 33
9. Technical data
9.1. Tiltrotator..........................................................................................................35
9.1.1. Overview.................................................................................................. 37
9.2. Load-holding valve.......................................................................................... 38
10. Glossary
10.1. Abbreviations................................................................................................. 39
11. Service
11.1. Service schedule........................................................................................... 40
11.1.1. Service every 500 operating hours........................................................ 40
11.1.2. Service every 250 hours........................................................................ 41
11.2. Service record................................................................................................41
4
1 Introduction
1. Introduction
1.1. General
This user manual contain important information about your product's functions and
characteristics, and how to use it in the best way. Before you begin using the product, it is
important that you read and understand the content of these instructions, especially the
sections that address safety.
In addition to these instructions, you must study and understand the applicable safety
information for the relevant base machine as well as any other equipment involved.
The user manual is supplied with supplementary documentation providing more detailed
descriptions of the installation, fitting, operation and maintenance of control systems and
custom modifications for your specific product.
Information, images, illustrations and specifications used in the instructions are based
on product information that was available at the time of going to press. Images and
illustrations used in the instructions are typical examples and not intended to be exact
depictions of various part of the product. We reserve the right to make changes without
prior notice.
Always store the user manual together with any other supplementary information in a safe
manner and such that it is always available.
1.2. Scrapping and recycling
engcon makes constant efforts to reduce its environmental impact. engcon's products
comprise at least 99 per cent recyclable material. All assembly and service work must
take place in compliance with legislation and ordinances governing the environment,
health and occupational safety. This refers to all work with residual materials including
handling, storage and processing. To prevent contamination of soil and water, spillages
must be avoided. Should a spillage occur, it must be dealt with.
Hazardous waste may only be disposed of by those authorised to do so. All waste
produced must be disposed of in compliance with applicable legislation and ordinances:
- Metal and plastics to be recycled.
- Hydraulic hoses are normally used for energy recovery (sort as hazardous waste).
- Oils and greases are normally used for energy recovery (sort as hazardous waste).
- Electronic components to be recycled for materials (sort as hazardous waste).
- Packaging to be sorted at source and recycled for materials.
- Paper to be sorted at source and recycled for materials.
If in doubt, contact the environmental manager at engcon.
1.3. Transport and storage
There are no lifting or attachment points on the tiltrotator. The tiltrotator may only be
handled, moved or transported while strapped to a pallet.
5
1 Introduction
When storing the piston rod of a cylinder for a long period, treat it with corrosion protection
or push it inside the cylinder.
1.3.1. Temperature during operation and storage
Description
Temperature
Operating temperature
-30° to +50°C
Temperature range during storage
-30° to +50°C
1.4. Warranty
All customers receive a 2-year warranty on their tiltrotator.
We encourage you to register your tiltrotator to enjoy faster service. Visit
www.engcon.com and search for "register your product".
1.5. Technical support and spare parts
Contact information for support and spare parts can be found at www.engcon.com.
6
1 Introduction
1.6. Product approval
1.6.1. EU Declaration of Conformity
Manufacturer:
engcon Nordic AB
Address:
Box 111, SE 833 22 Strömsund, SWEDEN
Telephone:
+ 46 670 178 00
Email:
engcon hereby declares that the below is manufactured in conformance with Machinery Directive 2006/42/EU.
Type designation:
Part no:
Serial No:
Max jacking point:
Max hydraulic pressure:
Date:
Other:
Because the following standards and regulatory directives are also applied, the product complies with the
requirements for CE marking.
-EMC Directive 2014/30/EU
-SS-EN ISO 12100:2010, SS-EN 474-1:2006+A5:2018 and SS-EN 474-5:2006+A3:2013, SS-ISO
13031:2016
-ISO 10567:2007, SAE J2506:2012, SAE J1362:2018
dold text
This declaration and engcon's warranties will cease to be valid immediately if spare parts other than engcon
original spare parts are used, or if any changes or other interventions are made without engcon's permission.
Osynlig fras
Krister Blomgren - Signatory for engcon Nordic AB
Osynlig fras
Qualified person authorised to compile the technical documentation:
Fredrik Jonsson, Head of R&D, engcon AB
7
2 Safety
2. Safety
2.1. General
It is important that you read and understand all warnings prior to installation work on this
product or before you use it and any accessories supplied. The warning texts highlight
potential risks and describe how to avoid them. The following warning levels are used in
this user manual:
DANGER
Indicates that an accident will occur if the regulation is
not followed. Risk of personal injury or death.
WARNING
Indicates that an accident may occur if the regulation
is not followed. Risk of personal injury or death.
CAUTION
Indicates that an accident may occur if the regulation
is not followed. Risk of personal injury.
IMPORTANT
Indicates that an accident may occur if the regulation is
not followed. Risk of damage to property, process or the
surroundings.
REMARKS
Specifies additional information that may make performance or
understanding of specific operations easier.
8
3 Design and function
3. Design and function
3.1. General
The engcon tiltrotator adds flexibility and efficiency to an excavator and allows it to be
used for more operations. The product provides the ability to both tilt and rotate a tool.
3.2. Tool(s)
engcon’s tiltrotators are designed to be used with engcon’s hydraulic tools and tools that
are type-approved in the base machine’s operator’s manual.
DANGER
Do not exceed tipping load limits. The weight of the
product and the increased reach may impair stability.
Risk of personal injury and damage to property.
3.3. Q-Safe
Q-Safe is a warning system that monitors the connection of tools to the machine quick
hitch and/or the quick hitch beneath the tiltrotator. It has a double mechanical lock to
prevent the tool coming loose from the hitch, even if some part of the locking system
should fail. The alarm outputs are connected to a QLM module mounted on the stick. It
uses sound and light warning signals when a tool is incorrectly connected, as the primary
safety purpose of the quick hitch is to protect personnel nearby. The operator must inform
personnel concerned what the alarms mean.
WARNING
Stop work immediately and begin troubleshooting if
the system warns of a faulty tool connection during
operation. Risk of personal injury and damage to
property.
CAUTION
Use hearing protection when close to or handling
the Q-Safe quick hitch when it is connected. Risk of
hearing damage.
9
Tabla de contenidos
Otros manuales de Equipos de construcción de Engcon
