ENFORCER EV-6680-N3WQ Manual de usuario

Note: Model numbers that end with “Q” or that have a round green “Q” sticker signify RoHS-compliant products.

OSD (On-Screen Display)

for Covert PIR Camera

Manual

For the following cameras:

Model Format

Programmable

Motion-Activated LED

Covert

IR LEDs

EV-6680-N3WQ

NTSC

Yes

EV-6680-P3WQ

PAL

Yes

EV-6681-N3WQ

NTSC

Yes

EV-6681-P3WQ

PAL

Yes

EV-6680 Series

Motion-activated LED

programmable from the

OSD menu, simulating a

real PIR sensor.

EV-6681 Series

Invisible 940nm IR

LEDsprovide infrared

light for the camera but

are invisible to the

human eye.

ENFORCER OSD (On-Screen Display) for Covert PIR Camera

2SECO-LARM U.S.A., Inc.

HLC OFF

D-WDR OFF

2D-NR OFF

HLC ON

D-WDR ON

2D-NR ON

Digital Wide Dynamic Range (D-WDR)...........9

Motion Detection.............................................9

Day / Night Mode...........................................10

2D Noise Reduction (NR)..............................11

Camera ID.....................................................11

Sync ..............................................................11

Language......................................................12

Camera Reset...............................................12

Troubleshooting.............................................12

Table of Contents:

Programmable Features................................... 2

How to Use the OSD Controller........................ 3

Main Setup Menu............................................. 3

Menu Diagram 1............................................... 4

Menu Diagram 2............................................... 5

Lens.................................................................. 5

Shutter / Automatic Gain Control (AGC)........... 6

White Balance.................................................. 7

Backlight Compensation (BLC)........................ 8

Programmable Features:

•Lens

Choose between DC Auto Iris and Manual

Lens Adjustment

•Shutter

Manually adjust the shutter speed

•White Balance

Adjust the color temperature and image

color of the picture

•Backlight Compensation (BLC)

Adjust the exposure to properly display the

subject in front of a bright light source

•Highlight Compensation (HLC)

Define target areas and remove spotlights

to make certain objects visible

•Picture Adjustment

Adjust the camera’s brightness, contrast,

sharpness, hue, and gain

•Digital Wide Dynamic Range (D-WDR)

Adjust the brightness values of the image for

a more detailed picture

•Motion Detection

Detect if there is motion in the scene

•Day/Night Mode

Adjust the level where the camera will

switch from color to B/W when the ambient

light is low

•2D Noise Reduction (NR)

Adjust for less interference on the screen in

an area with low illumination

•Camera ID

Set a name for the camera to display on

screen

•Language

Set the OSD language

ENFORCER OSD (On-Screen Display) for Covert PIR Camera

SECO-LARM U.S.A., Inc. 3

1. Press down on the joystick to open the OSD menu.

2. Use the joystick to navigate the OSD menu.

3. To select an item, press down on the joystick.

Please read the camera installation manual for safety precautions and detailed instructions on

how to install the camera.

How to Use the OSD Controller:

Main Setup Menu:

Menu items can be selected by using the joystick.

1. Press down on the joystick.

The Main Setup Menu will be displayed on the monitor.

2. Move to and select the required function by moving the joystick up and down.

3. Change the menu setting by moving the joystick left and right.

4. After choosing the setting, move the cursor to EXIT and press down on the joystick.

MenuDiagram1

MenuDiagram2

Note:

•Select available options bymoving the cursor to the desired feature.

•A submenu is available where the option reads .

•SYNC SETUP cannot be altered. SYNC SETUP is set to internal synchronization mode.

OSD

Controller

ENFORCER OSD (On-Screen Display) for Covert PIR Camera

4SECO-LARM U.S.A., Inc.

Menu Diagram 1:

SETUP MENU

SETTING

SETTING OPTIONS

1) LENS

(see page 5) AUTO

TYPE: DC / VIDEO

MODE: AUTO / OPEN / CLOSE

SPEED: 0~255Adjustable range

MANUAL

Set for fixed lens camera

2) SHUTTER / AGC

(see page 6)

AUTO

High Luminance: MODE1: SHUT + AUTO IRIS / AUTO IRIS / SHUT

BRIGHTNESS: 0~255 Adjustable range

Low Luminance: MODE: AGC / OFF

BRIGHTNESS: x0.25, x0.50, x0.75, x1.00

MANUAL

MODE: SHUT + AGC

SHUTTER: 1/60, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000,

1/10,000

AGC: 6.00, 12.00, 18.00, 24.00, 30.00, 36.00, 42.00, 44.80

3) WHITE BAL

(see page 7)

ATW

SPEED: 0~255Adjustable range

DELAY CNT: 0~255Adjustable range

ATW FRAME: x.050, x1.00, x1.50, x2.00

ENVIRONMENT: INDOOR / OUTDOOR

PUSH

Disable white balance mode

USER1

B-Gain: 0~255Adjustable range

R-Gain: 0~255Adjustable range

USER2

B-Gain: 0~255Adjustable range

R-Gain: 0~255Adjustable range

ANTI CR

Enable anti-color rolling

MANUAL

LEVEL: 26~72Adjustable range

PUSH LOCK

Disable white balance mode bypressingENTER

4) BACKLIGHT

(see page 8)

OFF

Disable backlight compensation

BLC

Enable backlight compensation

HLC

Enable highlight compensation

5) PICT ADJUST

(see page 8)

MIRROR

ON / OFF

BRIGHTNESS

0~255Adjustable range

CONTRAST

0~255Adjustable range

SHARPNESS

0~255Adjustable range

HUE

0~255Adjustable range

GAIN

0~255Adjustable range

6) D-WDR

(see page 9) ON

LUMINANCE: LOW / MID / HIGH

CONTRAST: LOW / MIDLOW / MID / MIDHIGH / HIGH

OFF

Disable digital wide dynamic range

7) MOTION DET

(see page 9) ON

DETECTSENSE: 0~127 Adjustable range

BLOCK DISP: ON / OFF / ENABLE

MONITOR AREA: ON / OFF

AREA SEL: Up to4 selectable zones

TOP: 0~244Adjustable range

BOTTOM: 0~244Adjustable range

LEFT: 0~474 Adjustable range

RIGHT: 0~474 Adjustable range

OFF

Disable motion detection

8) NEXT Access Menu Diagram 2 (see page 5)

9) EXIT Exit menu and save settings

10) SAVE ALL Savemenu settingswithoutexiting the menu

1 In MANUAL LENS mode,onlySHUTmode is available. InAUTO LENS mode, SHUT + AUTO IRIS and AUTO IRIS

modesare alsoavailable.

ENFORCER OSD (On-Screen Display) for Covert PIR Camera

SECO-LARM U.S.A., Inc. 5

Menu Diagram 2:

SETUP MENU

SETTING

SETTING OPTIONS

1) DAY / NIGHT

(see page 10)

AUTO

BURST: ON / OFF

DELAY CNT: 0~255Adjustable range

DAY NIGHT: 0~255 Adjustable range

NIGHT DAY: 0~255Adjustable range

COLOR

Display color image

B/W

BURST: ON / OFF

2) 2DNR

(see page 11)

NR MODE: OFF / Y / C / Y/C

Y LEVEL: 0~15 Adjustable range

C LEVEL: 0~15 Adjustable range

3) CAMERA ID

(see page 11)

Set aname for the camera to display on screen

OFF

Disable camera ID

4) SYNC

(see page 11)

Function is not used

5) LANGUAGE

(see page 12)

English, Chinese, Japanese, German, French, Russian, Portuguese, Spanish

6) CAMERA RESET

(see page 12) Resetcamera to factorysettings

7) BACK Access Menu Diagram 1 (see page 4)

8) EXIT Exit menu and save settings

9) SAVE ALL Savemenu settingswithoutexiting the menu

Lens:

This function is used to select the camera’s lens type.

1. Select LENS on the SETUP menu screen.

2. Select the desired lens type by pressing the joystick button.

Select RETURN to return to the SETUP menu.

AUTO: Select automatic mode for DC

Auto Iris lens.

•TYPE: Select lens type (DC or

VIDEO).

•MODE: Select the mode (AUTO,

OPEN, or CLOSE).

•SPEED: Set the Auto Iris movement

speed. Adjustable range: 0~255.

MANUAL: Select manual mode for

manual or fixed lens.

ENFORCER OSD (On-Screen Display) for Covert PIR Camera

6SECO-LARM U.S.A., Inc.

Shutter / Automatic Gain Control (AGC):

This function is used to manually adjust the shutter speed and AGC settings.

1. Select SHUTTER / AGC on the SETUP menu screen.

2. Select the desired shutter or AGC type by pressing the joystick button.

3. Select RETURN to return to the SETUP menu.

AUTO: The camera is in automatic shutter

mode.

A. HIGH LUMINANCE

•MODE: Select shutter mode.

-SHUT – This function is not used.

-AUTO IRIS – Adjust the iris to

allow a specific amount of

exposure.

-SHUT + AUTO IRIS –

Combination of both SHUT and

AUTO IRIS.

In manual lens mode, only SHUT mode is available. In automatic lens mode, only

AUTO IRIS or SHUT + AUTO IRIS modes are available.

•BRIGHTNESS: Set the auto-exposure image brightness. Adjustable range: 0~255.

B. LOW LUMINANCE

•MODE: Select low luminance mode (AGC or OFF).

•BRIGHTNESS: Select the automatic gain value. This setting has no effect if AGC is

on. Adjustable range: x0.25, x0.50, x0.75, x1.00.

MANUAL: The camera is in a fixed shutter

mode.

•MODE: This function is not used.

•SHUTTER: Selectable shutter speed.

Adjustable range: 1/60, 1/120, 1/250,

1/500, 1/1000, 1/2000, 1/4000,

1/10000.

•AGC: Set the gain value.

Adjustable range: 6.00, 12.00, 18.00,

24.00, 30.00, 36.00, 42.00, 44.80.

ENFORCER OSD (On-Screen Display) for Covert PIR Camera

SECO-LARM U.S.A., Inc. 7

White Balance:

This function is used to adjust the color temperature and image color of the picture.

1. Select WHITE BAL on the SETUP menu screen.

2. Select the desired white balance mode by

pressing the joystickbutton.

3. Select RETURN to return to the SETUP menu.

Automatic Tracking White Balance

(ATW):When the image color temperature

changes, it will automatically adjust the

white balance color temperature range from

1,800°K~10,500°K (ex.: a fluorescent light

or outdoors).

•SPEED: Set the ATW speed. Adjustable range: 0~255.

•DELAY CNT: Set the ATW delay time. Adjustable range: 0~255.

•ATW FRAME: Set the ATW zone ratio. Adjustable range: x0.50, x1.00, x1.50, x2.00.

•ENVIRONMENT: Set the ATW environment (INDOOR or OUTDOOR).

PUSH: In PUSH mode, the white balance

setting willbe disabled.

USER 1/2 WB: Independently set the white

balance setting for USER1 or USER 2.

•B-GAIN: Set the blue gain.

Adjustable range: 0~255.

•R-GAIN: Set the red gain.

Adjustable range: 0~255.

ANTI CR: Select this mode when color

rolling or flickering caused by the

unmatched frequency of electric lights

occurs.

MANUAL: Set the white balance level

manually.

•LEVEL: Set the color on-screen.

Adjustable range: 26~72.

PUSH LOCK: In PUSH LOCK mode, the

white balance setting will be disabled when

the ENTER button (OSD controller) or

joystick is pressed.

ENFORCER OSD (On-Screen Display) for Covert PIR Camera

8SECO-LARM U.S.A., Inc.

Backlight Compensation (BLC):

This function is used to control the light level to overcome strong backlight conditions.

1. Select BACKLIGHT on the SETUP menu screen.

2. Select the desired BLC mode by pressing the joystick button.

3. Select RETURN to return to the SETUP menu.

Backlight Compensation (BLC): Select this mode to correct the exposure of subjects in

front of a strong backlight.

BLC OFF

BLC ON



Highlight Compensation (HLC): Select this mode to improve the picture by displaying

shades of gray on a strong highlight.

HLC OFF

HLC ON

Picture Adjustment:

This function is used to adjust the color temperature and image color of the picture.

1. Select PICT ADJUST on the SETUP menu screen.

2. Select the desired picture setting by pressing the

joystick button.

3. Select RETURN to return to the SETUP menu.

•MIRROR: Flip the image horizontally.

•BRIGHTNESS: Set picture brightness.

Adjustable range: 0~255.

•CONTRAST: Set picture contrast.

Adjustable range: 0~255.

•SHARPNESS: Set picture sharpness.

Adjustable range: 0~255.

•HUE: Set picture hue.

Adjustable range: 0~255.

•GAIN: Set picture gain.

Adjustable range: 0~255.

ENFORCER OSD (On-Screen Display) for Covert PIR Camera

SECO-LARM U.S.A., Inc. 9

Digital Wide Dynamic Range (D-WDR):

This function willadjust the brightness value of the image for a more detailed picture.

1. Select D-WDR on the SETUP menu screen.

2. Select the desired D-WDR setting by pressing

the joystick button.

3. Select RETURN to return to the SETUP menu.

•LUMINANCE: Set the D-WDR brightness

(LOW, MID, or HIGH).

•CONTRAST: Set the D-WDR contrast

(LOW, MIDLOW, MID, MIDHIGH, or HIGH).

D-WDR OFF

D-WDR ON

Motion Detection:

This function is used to detect moving objects on-screen.

EV-6680 Series Only: The motion-activated LED is tied to the motion detection feature. Turn

MOTION DET ON or OFF to turn the motion-activated LED ON or OFF.

1. Select MOTION DET on the SETUP menu screen.

2. Select the desired MOTION DET mode by

pressing the joystickbutton.

•DETECT SENSE: Set detection sensitivity.

Adjustable range: 0~255.

•BLOCK DISP: Mosaic blocks will appear

where movement is present (ON, OFF, or

ENABLE). In ENABLE mode, select a certain

area in which motion is not detected. To exit

ENABLE mode, press down on the joystick for

2 seconds and then release.

•MONITOR AREA: Set detection area.

•AREA SEL: Set up to 4 detection zones.

-TOP: Set vertical start position. Adjustable range: 0~244.

-BOTTOM: Set vertical end position. Adjustable range: 0~244.

-LEFT: Set horizontal start position. Adjustable range: 0~244.

-RIGHT: Set horizontal end position. Adjustable range: 0~244.

Note: If motion detection is turned

ON for EV-6680-N3WQ and

EV-6680-P3WQ, a red LED will turn

ON every time motion is detected.

ENFORCER OSD (On-Screen Display) for Covert PIR Camera

10 SECO-LARM U.S.A., Inc.

Select to advance to the next menu diagram.

Exit:

Select to save current settings and exit the SETUP menu.

Save All:

Select to save menu settings without exiting the SETUP menu.

Day/Night Mode:

This function willadjust the brightness value of the image for a more detailed picture.

1. Select DAY/NIGHT on the SETUP menu screen.

2. Select the desired DAY/NIGHT setting by

pressing the joystickbutton.

3. Select RETURN to return to the SETUP menu.

AUTO: The camera image will switch to

color in normal situations and B/W when

ambient light is low.

•BURST: Set BURST mode (ON or OFF). When BURST mode is ON, the image colors will

be suppressed but present when the camera switches to B/W mode. When BURST mode

is OFF, the image colors willbe B/W when the camera switches to B/W mode.

•DELAY CNT: Set the COLOR/B&W interchange delaytime. Adjustable range: 0~255 sec.

•DAY NIGHT: Define light level to trigger B/W mode. Adjustable range: 0~255.

•NIGHT DAY: Define light level to trigger COLOR mode. Adjustable range: 0~255.

PUSH: The camera image will always display in color.

B/W: The camera image will always display in B/W.

•BURST: Set BURST mode (ON or OFF). When

BURST mode is ON, the image colors will be

suppressed but present when the camera

switches to B/W mode. When BURST mode is

OFF, the image colors will be B/W when the

camera switches to B/W mode.

•IR OPTIMIZER: Turn ON or OFF.

•MODE: AUTO optimizes the IR, or optimizes to

the CENTER.

•LEVEL: Sets the level of IR optimization.

Adjustable range: 0~255.

Otros manuales para EV-6680-N3WQ

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Cámara de seguridad de ENFORCER

ENFORCER

ENFORCER EV-2625-NKEQ Manual de usuario

ENFORCER

ENFORCER EV-C1303-NMGQ Manual de usuario

ENFORCER

ENFORCER EV-Y4201-A2SQ Manual de usuario

ENFORCER

ENFORCER EV-Y2201-A2WQ Manual de usuario

ENFORCER

ENFORCER EV-6600-N2BQ Manual de usuario

ENFORCER

ENFORCER EV-1223C12 Manual de usuario

ENFORCER

ENFORCER EV-1026-N2SQ Manual de usuario

ENFORCER

ENFORCER ENFORCER EV-1626-NWGQ Manual de usuario

ENFORCER

ENFORCER EV-1026-N2SQ Manual de usuario

ENFORCER

ENFORCER EV-Y1201-A2WQ Manual de usuario

ENFORCER

ENFORCER EV-Y2501-A2WWQ Manual de usuario

ENFORCER

ENFORCER EV-Y6221-A3WQ Manual de usuario

ENFORCER

ENFORCER EV-5105-N1SQ Manual de usuario

ENFORCER

ENFORCER EV-Y6201-A3WQ Manual de usuario

ENFORCER

ENFORCER EV-C1303-NMGQ Manual de usuario

ENFORCER

ENFORCER EV-N1506-NW4WQ Manual de usuario

ENFORCER

ENFORCER EV-Y5105-N2SQ Manual de usuario

ENFORCER

ENFORCER EV-Y1201-A2WQ Manual de usuario

ENFORCER

ENFORCER EV-122C-FVB3Q Manual de usuario

ENFORCER

ENFORCER EV-N2806-2W4D Manual de usuario

ENFORCER

ENFORCER Elite EV-2606-NJEQ Manual de usuario

ENFORCER

ENFORCER EV-2876-UKGQ Manual de usuario

ENFORCER

ENFORCER EV-6640-N3WQ Manual de usuario

ENFORCER

ENFORCER EV-1026-N2GQ Manual de usuario

Manuales populares de Cámara de seguridad de otras marcas

Okina USA

Okina USA SIR36-870VF650LP Manual de usuario

Divio

Divio NDR155PA Manual de usuario

Canon

Canon VB-C500D Manual de usuario

Easy Access

Easy Access EasyGuard Manual de usuario

Vivotek

Vivotek FD9389-EHV-v2 Manual de usuario

TUYA

TUYA COSMO W2 Manual de usuario

Eusso

Eusso UNC7500-IR Guía de configuración

urmet domus

urmet domus 1096/204 Manual de usuario

VC VC20 series Manual de usuario

Axis

Axis Q1614 Manual de usuario

ieGeek

ieGeek DD201 Manual de usuario

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manual de usuario

Vicon

Vicon V662-D-1 Instrucciones de funcionamiento

Grundig

Grundig GCH-K0274P Manual de usuario

Lorex

Lorex VANTAGE LBC7032 Manual de usuario

4xem

4xem WPT Manual de usuario

Samsung

Samsung SCV-3082 Manual de usuario

Vitek

Vitek VTC-C544 Manual de usuario