Endress+Hauser Levelflex M FMP41C Manual de usuario

BA278F/00/en/05.06

No. 52021037

Valid as of software version

V 01.04.00 (amplifier)

V 1.0 (communication)

Operating Instructions

Levelflex M FMP41C

Guided Level-Radar

FOUNDATION Fieldbus

Brief overview Levelflex M FMP41C with FOUNDATION Fieldbus

2Endress + Hauser

Brief overview

For quick and simple commissioning:

Safety Instructions →Page 6 ff.

Explanation of the warning symbols

You can find special instructions at the appropriate position in the chapter in

question. The positions are indicated with the icons Warning #, Caution "and

Note !.

Installation →Page 12 ff.

The steps for installing the device and installation conditions (e.g. dimensions)

can be found here.

Wiring →Page 22 ff.

The device is virtually completely wired on delivery.

Display and Operating Elements →Page 27 ff.

An overview of the position of the display and operating elements can be found

here.

Commissioning via Display VU331 →Page 51 ff.

In the "Commissioning" section, you learn how to switch on the device and

check the functioning.

Commissioning via Operating Software ToF Tool →Page 67 ff.

In the "Commissioning" section, you learn how to switch on the device and

check the functioning.

Additional information on the operation of the ToF Tool can be found in the

operating instructions BA224F/00.

Fault Tracking / Trouble Shooting →Page 78 ff.

If faults occur during operation, use the checklist to localise the cause.

Here you can find measures you can take yourself to take remedial action

against the fault.

Index →Page 101 ff.

You can find important terms and keywords on the individual sections here.

Use the keyword index to find quickly and efficiently the information you need.

Levelflex M FMP41C with FOUNDATION Fieldbus Brief overview

Endress + Hauser 3

Brief operating instructions

L00-FMP40xxx-19-00-00-en-012

!Note!

This operating manual explains the installation and initial start-up for the level transmitter

measuring device. All functions that are required for a typical measuring task are taken into account

here.

In addition, the Levelflex M provides many other functions that are not included in this operating

manual, such as optimising the measuring point and converting the measured values.

An overview of all device functions can be found on Page 96.

An extensive description of all device functions can be found in BA245F – "Description of the

instrument functions" on the enclosed CD-ROM.

Operating Instructions can also be found on our homepage: www.endress.com

… …

KA 189F/00/a2/11.05

52012501

100%

Levelflex M - Brief operating instructions

input E

(see sketch)

input F

(see sketch) displayed

D and L are confirm

or specify

range

suggestion

000

measured value

Group

selection

basic setup

safety settings

display

linearisation

extended calibr.

system

parameters

092

language

diagnostics

0A0

present

error

002

tank

properties

004

process

cond.

005

empty

calibr.

006

full

calibr.

008

dist./

meas value

051

check

distance

003

medium

property

052

range of

mapping

053

start

mapping

008

dist./

meas value

- envel. curve

- substracted signal

- mapping

- single curve

- cyclic

= 100: unlocked

¹ 100: locked

09A

plot settings

09B

recording

curve

0A1

error

0A4

unlock

parameter

(333 = reset customer parameters)

0A3

reset

min. level

threaded

connection

1½

(G 1

reference point of

measurement

¾or BSP

¾orG ½)

¾or1½NPT

length

adjustment

030

end of

probe

031

probe

length

032

probe

033

probe

length

034

determine

length

- unknown

- 1.4 … 1.6

- 1.6 … 1.9

- 1.9 … 2.5

-4…7

-2.5…4

->7

envelope curve

Contrast: +or +

- standard

- aluminium tank

- plastic tank

- bypass/pipe

- coax-probe

- concrete

wall

- standard

- fast

change

- test: no filter

- slow

change

- free

- tie down

isolated

- tie down

gnd.

If shortened

please enter probe length here.

reference point of

measurement

F = measuring span

E = empty distance (= zero)

UB = upper blocking distance

LN = probe length

L = level

D = distance

Brief overview Levelflex M FMP41C with FOUNDATION Fieldbus

4Endress + Hauser

Levelflex M FMP41C with FOUNDATION Fieldbus Table of contents

Endress + Hauser 5

Table of contents

1 Safety instructions . . . . . . . . . . . . . . . . 6

1.1 Designated use . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

1.2 Installation, commissioning and operation . . . . . . . . 6

1.3 Operational safety . . . . . . . . . . . . . . . . . . . . . . . . . . 6

1.4 Notes on safety conventions and icons . . . . . . . . . . . 7

2 Identification . . . . . . . . . . . . . . . . . . . . 8

2.1 Device designation . . . . . . . . . . . . . . . . . . . . . . . . . 8

2.2 Scope of delivery . . . . . . . . . . . . . . . . . . . . . . . . . . 11

2.3 Certificates and approvals . . . . . . . . . . . . . . . . . . . 11

2.4 Registered trademarks . . . . . . . . . . . . . . . . . . . . . . 11

3 Installation . . . . . . . . . . . . . . . . . . . . . 12

3.1 Incoming acceptance, transport, storage . . . . . . . . . 12

3.2 Installation conditions . . . . . . . . . . . . . . . . . . . . . . 13

3.3 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

3.4 Turn housing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

3.5 Post-installation check . . . . . . . . . . . . . . . . . . . . . . 21

4 Wiring . . . . . . . . . . . . . . . . . . . . . . . . 22

4.1 Quick wiring guide . . . . . . . . . . . . . . . . . . . . . . . . 22

4.2 Connecting the measuring unit . . . . . . . . . . . . . . . 25

4.3 Recommended connection . . . . . . . . . . . . . . . . . . 26

4.4 Degree of protection . . . . . . . . . . . . . . . . . . . . . . . 26

4.5 Post-connection check . . . . . . . . . . . . . . . . . . . . . . 26

5 Operation . . . . . . . . . . . . . . . . . . . . . . 27

5.1 Quick operation guide . . . . . . . . . . . . . . . . . . . . . . 27

5.2 Display and operating elements . . . . . . . . . . . . . . . 29

5.3 Local operation . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

5.4 Display and acknowledging error messages . . . . . . 34

5.5 FOUNDATION Fieldbus communication . . . . . . . . 36

6 Commissioning. . . . . . . . . . . . . . . . . . 51

6.1 Function check . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

6.2 Switching on the measuring device . . . . . . . . . . . . 51

6.3 Basic Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

6.4 Basic Setup with the VU331 . . . . . . . . . . . . . . . . . 54

6.5 Blocking distance . . . . . . . . . . . . . . . . . . . . . . . . . 62

6.6 Envelope curve with VU331 . . . . . . . . . . . . . . . . . 64

6.7 Function "envelope curve display" (0E3) . . . . . . . . 65

6.8 Basic Setup with the ToF Tool . . . . . . . . . . . . . . . . 67

7 Maintenance. . . . . . . . . . . . . . . . . . . . 73

8 Accessories. . . . . . . . . . . . . . . . . . . . . 74

9 Trouble-shooting . . . . . . . . . . . . . . . . 78

9.1 Trouble-shooting instructions . . . . . . . . . . . . . . . . 78

9.2 System error messages . . . . . . . . . . . . . . . . . . . . . . 79

9.3 Application errors . . . . . . . . . . . . . . . . . . . . . . . . . 81

9.4 Spare parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83

9.5 Return . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89

9.6 Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89

9.7 Software history . . . . . . . . . . . . . . . . . . . . . . . . . . . 89

9.8 Contact addresses of Endress+Hauser . . . . . . . . . . . 89

10 Technical data . . . . . . . . . . . . . . . . . . . 90

10.1 Additional technical data . . . . . . . . . . . . . . . . . . . . 90

11 Appendix. . . . . . . . . . . . . . . . . . . . . . . 96

11.1 Operating menu FOUNDATION Fieldbus, ToF Tool . .

11.2 Description of functions . . . . . . . . . . . . . . . . . . . . . 98

11.3 Function and system design . . . . . . . . . . . . . . . . . . 98

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101

Safety instructions Levelflex M FMP41C with FOUNDATION Fieldbus

6Endress + Hauser

1 Safety instructions

1.1 Designated use

The Levelflex M FMP41C is a compact level transmitter for the continuous measurement of solids

and liquids, measuring prinziple: Guided Level Radar / TDR: Time Domain Reflectometry.

1.2 Installation, commissioning and operation

The Levelflex M has been designed to operate safely in accordance with current technical, safety

and EU standards. If installed incorrectly or used for applications for which it is not intended,

however, it is possible that application-related dangers may arise, e.g. product overflow due to

incorrect installation or calibration. For this reason, the instrument must be installed, connected,

operated and maintained according to the instructions in this manual: personnel must be authorised

and suitably qualified. The manual must have been read and understood, and the instructions

followed. Modifications and repairs to the device are permissible only when they are expressly

approved in the manual.

1.3 Operational safety

Hazardous areas

Measuring systems for use in hazardous environments are accompanied by separate "Ex

documentation", which is an integral part of this Operating Manual. Strict compliance with the

installation instructions and ratings as stated in this supplementary documentation is mandatory.

• Ensure that all personnel are suitably qualified.

• Observe the specifications in the certificate as well as national and local regulations.

Levelflex M FMP41C with FOUNDATION Fieldbus Safety instructions

Endress + Hauser 7

1.4 Notes on safety conventions and icons

In order to highlight safety-relevant or alternative operating procedures in the manual, the following

conventions have been used, each indicated by a corresponding symbol in the margin.

Safety conventions

Warning!

A warning highlights actions or procedures which, if not performed correctly, will lead to personal

injury, a safety hazard or destruction of the instrument

Caution!

Caution highlights actions or procedures which, if not performed correctly, may lead to personal

injury or incorrect functioning of the instrument

Note!

A note highlights actions or procedures which, if not performed correctly, may indirectly affect

operation or may lead to an instrument response which is not planned

Explosion protection

Device certified for use in explosion hazardous area

If the device has this symbol embossed on its name plate it can be installed in an explosion hazardous

area

Explosion hazardous area

Symbol used in drawings to indicate explosion hazardous areas. Devices located in and wiring

entering areas with the designation “explosion hazardous areas” must conform with the stated type

of protection.

Safe area (non-explosion hazardous area)

Symbol used in drawings to indicate, if necessary, non-explosion hazardous areas. Devices located in

safe areas still require a certificate if their outputs run into explosion hazardous areas

Electrical symbols

Direct voltage

A terminal to which or from which a direct current or voltage may be applied or supplied

Alternating voltage

A terminal to which or from which an alternating (sine-wave) current or voltage may be applied or

supplied

)

Grounded terminal

A grounded terminal, which as far as the operator is concerned, is already grounded by means of an

earth grounding system

Protective grounding (earth) terminal

A terminal which must be connected to earth ground prior to making any other connection to the

equipment

Equipotential connection (earth bonding)

A connection made to the plant grounding system which may be of type e.g. neutral star or

equipotential line according to national or company practice

Temperature resistance of the connection cables

States, that the connection cables must be resistant to a temperature of at least 85 °C.

t >85°C

Identification Levelflex M FMP41C with FOUNDATION Fieldbus

8Endress + Hauser

2 Identification

2.1 Device designation

2.1.1 Nameplate

The following technical data are given on the instrument nameplate:

L00-FMP4xxxx-18-00-00-en-001

Fig. 1: Information on the nameplate of the Levelflex M FMP41C (example)

2.1.2 Ordering structure

This overview does not mark options which are mutually exclusive.

Ordering structure Levelflex M FMP41C

Made in Germany

D-79689 Maulburg

Dat./Insp.:

Order Code:

IP68 / NEMA 6P

Ser.-No.:

4-wire

ENDRESS+HAUSER

t >85°C

TA > 70°C:

D01301-A

if modification

see sep. label

X= Patents

LEVELFLEX-M

90 …253 V AC 3,5VA

10,5 …32 V DC 1W

16 …3 V DC 0,8W

Profibus PA

Foundation Fieldbus

LN= PN=

4…20 mA HART 2-wire

Order No

(see Order Information)

Communication

variant and

supply voltage

Serial number

Reference to additional

safety-relevant documentation

Designation according to Directive 94/9/EC

and designation of protection

10 Approval:

A Non-hazardous area

F Non-hazardous area, WHG

1 ATEX II 1/2G EEx ia IIC T6