Endress+Hauser Memosens Wave CKI50 Manual de usuario

Products Solutions Services

Operating Instructions

Memosens Wave CKI50

Process spectrometer for the measurement of color

BA01932C/07/EN/02.23-00

71625488

2023-08-10

Memosens Wave CKI50 Table of contents

Endress+Hauser 3

Table of contents

1 About this document ................ 4

1.1 Warnings ............................ 4

1.2 Symbols .............................. 4

1.3 Symbols on the device ................... 4

1.4 Documentation ........................ 5

2 Basic safety instructions ............ 6

2.1 Requirements of the personnel ............. 6

2.2 Intended use .......................... 6

2.3 Occupational safety ..................... 6

2.4 Operational safety ...................... 6

2.5 Product safety ......................... 7

3 Product description ................. 8

3.1 Product design ......................... 8

3.2 Measuring principle ..................... 8

4 Incoming acceptance and product

identification ..................... 10

4.1 Incoming acceptance ................... 10

4.2 Product identification ................... 10

4.3 Scope of delivery ...................... 11

4.4 Certificates and approvals ............... 11

5 Mounting the device ............... 12

5.1 Mounting requirements ................. 12

5.2 Mounting the process spectrometer ........ 15

5.3 Post-installation check .................. 16

6 Electrical connection .............. 17

6.1 Connecting the device .................. 17

6.2 Ensuring the degree of protection .......... 19

6.3 Post-connection check .................. 20

7 Commissioning .................... 21

7.1 Preparations ......................... 21

7.2 Function check ....................... 21

8 Operation ......................... 22

8.1 Adapting the measuring device to the process

conditions ........................... 22

9 Diagnostics and troubleshooting ... 24

9.1 General troubleshooting ................. 24

10 Maintenance ...................... 25

10.1 Maintenance work ..................... 25

11 Repair ............................ 36

11.1 General notes ........................ 36

11.2 Spare parts .......................... 36

11.3 Return .............................. 36

11.4 Disposal ............................ 36

12 Technical data .................... 38

12.1 Input ............................... 38

12.2 Performance characteristics .............. 38

12.3 Environment ......................... 39

12.4 Process ............................. 39

12.5 Mechanical construction ................ 40

Index .................................. 41

About this document Memosens Wave CKI50

4 Endress+Hauser

1 About this document

1.1 Warnings

Structure of information Meaning

LDANGER

Causes (/consequences)

If necessary, Consequences of

non-compliance (if applicable)

‣Corrective action

This symbol alerts you to a dangerous situation.

Failure to avoid the dangerous situation will result in a fatal or serious

injury.

LWARNING

Causes (/consequences)

If necessary, Consequences of

non-compliance (if applicable)

‣Corrective action

This symbol alerts you to a dangerous situation.

Failure to avoid the dangerous situation can result in a fatal or serious

injury.

LCAUTION

Causes (/consequences)

If necessary, Consequences of

non-compliance (if applicable)

‣Corrective action

This symbol alerts you to a dangerous situation.

Failure to avoid this situation can result in minor or more serious injuries.

NOTICE

Cause/situation

If necessary, Consequences of

non-compliance (if applicable)

‣Action/note

This symbol alerts you to situations which may result in damage to

property.

1.2 Symbols

Symbol Meaning

Additional information, tips

Permitted or recommended

Recommended

Not permitted or not recommended

Reference to device documentation

Reference to page

Reference to graphic

 Result of a step

1.3 Symbols on the device

Symbol Meaning

Reference to device documentation

Memosens Wave CKI50 About this document

Endress+Hauser 5

1.4 Documentation

The following manuals, which complement these Operating Instructions, can be found on

the product pages on the Internet:

Technical Information Memosens Wave CKI50, TI01431C

Operating Instructions Liquiline CM44P, BA01954C

In addition to the Operating Instructions and depending on the relevant approval, XA

"Safety instructions" are supplied with sensors for the hazardous area.

‣Please follow the XA instructions when using the device in the hazardous area.

Basic safety instructions Memosens Wave CKI50

6 Endress+Hauser

2 Basic safety instructions

2.1 Requirements of the personnel

• Installation, commissioning, operation and maintenance of the measuring system may

be carried out only by specially trained technical personnel.

• The technical personnel must be authorized by the plant operator to carry out the

specified activities.

• The electrical connection may be performed only by an electrical technician.

• The technical personnel must have read and understood these Operating Instructions

and must follow the instructions contained therein.

• Faults at the measuring point may only be rectified by authorized and specially trained

personnel.

Repairs not described in the Operating Instructions provided must be carried out only

directly at the manufacturer's site or by the service organization.

2.2 Intended use

The process spectrometer is used for the in-line analysis of liquids. It is used to detect color

using VIS spectroscopy (VIS = visible). The device can measure and determine color, color

variations or the accuracy of the color in liquids.

Use of the device for any purpose other than that described, poses a threat to the safety of

people and of the entire measuring system and is therefore not permitted.

The manufacturer is not liable for damage caused by improper or non-designated use.

2.3 Occupational safety

As the user, you are responsible for complying with the following safety conditions:

• Installation guidelines

• Local standards and regulations

• Regulations for explosion protection

Electromagnetic compatibility

• The product has been tested for electromagnetic compatibility in accordance with the

applicable international standards for industrial applications.

• The electromagnetic compatibility indicated applies only to a product that has been

connected in accordance with these Operating Instructions.

2.4 Operational safety

Before commissioning the entire measuring point:

1. Verify that all connections are correct.

2. Ensure that electrical cables and hose connections are undamaged.

3. Do not operate damaged products, and protect them against unintentional operation.

4. Label damaged products as defective.

During operation:

‣If faults cannot be rectified:

products must be taken out of service and protected against unintentional operation.

Memosens Wave CKI50 Basic safety instructions

Endress+Hauser 7

LCAUTION

Programs not switched off during maintenance activities.

Risk of injury due to medium or cleaning agent!

‣Quit any programs that are active.

‣Switch to the service mode.

‣If testing the cleaning function while cleaning is in progress, wear protective clothing,

goggles and gloves or take other suitable measures to protect yourself.

2.5 Product safety

2.5.1 State of the art

The product is designed to meet state-of-the-art safety requirements, has been tested, and

left the factory in a condition in which it is safe to operate. The relevant regulations and

international standards have been observed.

Product description Memosens Wave CKI50

8 Endress+Hauser

3 Product description

3.1 Product design

123

A0037587

 1 Process spectrometer CKI50

1 Measurement gap

2 Process connection

3 Electronics unit

4 Cooling connections for water cooling

5 Measuring head

The process spectrometer can be operated directly in-line without any additional sampling.

All the necessary modules are contained in the electronics unit:

• Power supply

• Light sources

• Spectrometer

Receives the measurement signals, digitalizes them and converts them to a

measurement value.

• Microcontroller

Responsible for controlling internal processes and transmitting data.

• Processor unit

The process spectrometer contains the following light source:

Halogen bulb: 380 to 830 nm

3.2 Measuring principle

The process spectrometer uses optical signals to analyze the medium. Information about

the medium is then output as measurement parameters. The transmitter displays the

measurement parameters. These are used to monitor or directly control a process.

The process spectrometer measures the portion of the sample that is located in the

measurement gap of the measuring head. The sample is illuminated with light and an

interaction takes place between the sample and the introduced light. The transmitted light

is collected again via the observation window and analyzed in the electronics unit. The

spectrum of the collected light is then analyzed and the corresponding measurement

parameter is calculated.

Memosens Wave CKI50 Product description

Endress+Hauser 9

123

A0037674

 2 Absorption measurement

1 Light source

2 Optical windows

3 Detector

4 Direction of medium flow

A light source sends a beam of light through the medium via the optical windows. The

incident light beam is measured on the detector side →  2,  9.

3.2.1 Light absorption

The measuring principle is based on the Lambert-Beer law.

There is a linear dependency between the absorption of light and the concentration of the

absorbing substance:

A = -log10 (I/I0) = ε . c . OPL

A Absorption

I Intensity of received light at detector

I0Intensity of transmitted light of light source

ε Extinction coefficient

c Concentration

OPL Optical path length

Incoming acceptance and product identification Memosens Wave CKI50

10 Endress+Hauser

4 Incoming acceptance and product

identification

4.1 Incoming acceptance

1. Verify that the packaging is undamaged.

 Notify the supplier of any damage to the packaging.

Keep the damaged packaging until the issue has been resolved.

2. Verify that the contents are undamaged.

 Notify the supplier of any damage to the delivery contents.

Keep the damaged goods until the issue has been resolved.

3. Check that the delivery is complete and nothing is missing.

 Compare the shipping documents with your order.

4. Pack the product for storage and transportation in such a way that it is protected

against impact and moisture.

 The original packaging offers the best protection.

Make sure to comply with the permitted ambient conditions.

If you have any questions, please contact your supplier or your local Sales Center.

4.2 Product identification

4.2.1 Nameplate

The nameplate provides you with the following information on your device:

• Manufacturer identification

• Extended order code

• Serial number

• Safety information and warnings

‣Compare the information on the nameplate with the order.

4.2.2 Identifying the product

Product page

www.endress.com/cki50

Interpreting the order code

The order code and serial number of your product can be found in the following locations:

• On the nameplate

• In the delivery papers

Obtaining information on the product

1. Go to www.endress.com.

2. Page search (magnifying glass symbol): Enter valid serial number.

3. Search (magnifying glass).

 The product structure is displayed in a popup window.

4. Click the product overview.

 A new window opens. Here you fill information pertaining to your device,

including the product documentation.

Tabla de contenidos

Otros manuales de Instrumento de medición de Endress+Hauser

Endress+Hauser

Endress+Hauser Proline t-mass B 150 Especificaciones técnicas

Endress+Hauser

Endress+Hauser Stamolys CA71CODcr Manual de usuario

Endress+Hauser

Endress+Hauser Levelflex FMP55 Manual de usuario

Endress+Hauser

Endress+Hauser analytikjena multi N/C UVHS Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promass 83 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promass Q 300 Manual de usuario

Endress+Hauser

Endress+Hauser Levelflex M FMP40 Manual

Endress+Hauser

Endress+Hauser Cerabar PMP21 Manual de usuario

Endress+Hauser

Endress+Hauser Micropilot FMR54 Instrucciones de instalación

Endress+Hauser

Endress+Hauser Levelflex M FMP45 Manual de usuario

Endress+Hauser

Endress+Hauser Cleanfit W CPA450 Manual de usuario

Endress+Hauser

Endress+Hauser Micropilot S FMR540 Manual de usuario

Endress+Hauser

Endress+Hauser Liquiline M CM42 Manual de usuario

Endress+Hauser

Endress+Hauser Liquistation CSF48 Manual de usuario

Endress+Hauser

Endress+Hauser Liquiphant FTL63 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual de usuario

Endress+Hauser

Endress+Hauser SpectraSensors OXY5500 Guía del usuario

Endress+Hauser

Endress+Hauser RID16 Especificaciones técnicas

Endress+Hauser

Endress+Hauser SpectraSensors J22 TDLAS Manual de usuario

Endress+Hauser

Endress+Hauser Prosonic S FMU90 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promass 80E Manual

Endress+Hauser

Endress+Hauser Liquiphant M FTL50 Manual de usuario

Endress+Hauser

Endress+Hauser Levelflex FMP56 Manual

Endress+Hauser

Endress+Hauser ria45 Manual de usuario

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario

Acterna

Acterna MS1400 Manual de usuario

R&S

R&S ZPH Manual de usuario