Endress+Hauser Cleanfit COA451 Manual de usuario

Quality made by

Endress+Hauser

ISO 9001

BA 368C/07/en/11.03

51512834 CleanFit COA 451

Retractable Process Assembly

Operating Instructions

CleanFit COA 451

Endress+Hauser 3

Table of contents

1 Safety instructions . . . . . . . . . . . . . . 4

1.1 Designated use . . . . . . . . . . . . . . . . . . . . . . . . 4

1.2 Installation, commissioning and operation . . . 4

1.3 Operational safety . . . . . . . . . . . . . . . . . . . . . . 4

1.4 Return . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

1.5 Notes on safety icons and symbols . . . . . . . . . 5

2 Identification . . . . . . . . . . . . . . . . . . . 6

2.1 Device designation . . . . . . . . . . . . . . . . . . . . . 6

2.2 Scope of delivery . . . . . . . . . . . . . . . . . . . . . . . 6

3 Installation. . . . . . . . . . . . . . . . . . . . . 7

3.1 Incoming acceptance, transport, storage . . . . 7

3.2 Installation conditions . . . . . . . . . . . . . . . . . . . 7

3.3 Installation instructions . . . . . . . . . . . . . . . . . . 9

3.4 Post-installation check . . . . . . . . . . . . . . . . . . 13

4 Operation . . . . . . . . . . . . . . . . . . . . . 14

4.1 First commissioning . . . . . . . . . . . . . . . . . . . . 14

4.2 Operating elements . . . . . . . . . . . . . . . . . . . . 14

4.3 Assembly operation . . . . . . . . . . . . . . . . . . . . 15

5 Maintenance . . . . . . . . . . . . . . . . . . 16

5.1 Cleaning of the assembly . . . . . . . . . . . . . . . 16

5.2 Cleaning of the sensor . . . . . . . . . . . . . . . . . . 16

5.3 Cleaning agents . . . . . . . . . . . . . . . . . . . . . . . 17

6 Accessories . . . . . . . . . . . . . . . . . . . 18

6.1 Accessories kits . . . . . . . . . . . . . . . . . . . . . . . 18

6.2 Sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

6.3 Documentation . . . . . . . . . . . . . . . . . . . . . . . . 18

6.4 Profiling plates . . . . . . . . . . . . . . . . . . . . . . . . 18

6.5 Welded fitting . . . . . . . . . . . . . . . . . . . . . . . . . 19

7 Trouble-shooting. . . . . . . . . . . . . . . 20

7.1 Replacing damaged parts . . . . . . . . . . . . . . . 20

7.2 Replacing seals . . . . . . . . . . . . . . . . . . . . . . . 20

7.3 Spare part kits . . . . . . . . . . . . . . . . . . . . . . . . 22

7.4 Return . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

7.5 Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

8 Technical data . . . . . . . . . . . . . . . . . 24

8.1 Environment . . . . . . . . . . . . . . . . . . . . . . . . . . 24

8.2 Process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

8.3 Mechanical construction . . . . . . . . . . . . . . . . 25

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Safety instructions CleanFit COA 451

4Endress+Hauser

1Safetyinstructions

1.1 Designated use

The manually or pneumatically operated retractable assembly Cleanfit COA 451 is

designed for installing oxygen sensors in tanks and pipes.

Its mechanical design permits its use in pressurised systems (see "Technical data").

Any other use than the one described here compromises the safety of persons and the

entire measuring system and is, therefore, not permitted.

The manufacturer is not liable for damage caused by improper or non-designated use.

1.2 Installation, commissioning and operation

Please note the following items:

•Installation, electrical connection, commissioning, operation and maintenance of the

measuring system must only be carried out by trained technical personnel.

The technical personnel must be authorised for the specified activities by the system

operator.

•Technical personnel must have read and understood these Operating Instructions

and must adhere to them.

•Before commissioning the entire measuring point, check all the connections for

correctness. Ensure that electrical cables and hose connections are not damaged.

•Do not operate damaged products and secure them against unintentional

commissioning. Mark the damaged product as being defective.

•Measuring point faults may only be rectified by authorised and specially trained

personnel.

•If faults can not be rectified, the products must be taken out of service and secured

against unintentional commissioning.

•Repairs not described in these Operating Instructions may only be carried out at the

manufacturer’s or by the Endress+Hauser service organisation.

1.3 Operational safety

The assembly has been designed and tested according to the state of the art and left

the factory in perfect functioning order.

Relevant regulations and European standards have been met.

As the user, you are responsible for complying with the following safety conditions:

•Installation instructions

•Local prevailing standards and regulations.

1.4 Return

If the assembly has to be repaired, please return it cleaned to the Endress+Hauser

sales centre responsible.

Please use the original packaging, if possible.

Please enclose the completed Dangerous Goods sheet (copy the second last page of

these Operating Instructions) with the packaging and also the shipping documents.

No repair without completed Dangerous Goods sheet!

CleanFit COA 451 Safety instructions

Endress+Hauser 5

1.5 Notes on safety icons and symbols

Warning!

This symbol alerts you to hazards. They can cause serious damage to the instrument or

to persons if ignored.

Caution!

This symbol alerts you to possible faults which could arise from incorrect operation.

They could cause damage to the instrument if ignored.

Note!

This symbol indicates important items of information.

Identification CleanFit COA 451

6Endress+Hauser

2 Identification

2.1 Device designation

2.1.1 Nameplate

You can identify the assembly version by the order code on the nameplate. Please

compare this code with your order.

You can find possible assembly versions and the resulting order codes in the product

structure.

2.1.2 Product structure

2.2 Scope of delivery

The scope of delivery comprises:

•CleanFit assembly (ordered version)

•Operating Instructions (English).

If you have any questions, please contact your supplier or your Endress+Hauser sales

centre responsible (see back page of these Operating Instructions).

C07-COA451xx-18-07-00-en-001.eps

Fig. 1: Example of a nameplate

Sensor lift / Immersion depth

A Short lift, Immersion depth approx. 170 mm / 6.69" (process connections A and B only)

B Long lift, Immersion depth approx. 270 mm / 10.63"

Sensor type / Connection

1 For COS 31 with G1, Sensor length approx. 200 - 220 mm / 7.87 - 8.66"

2 For COS 41 / COS 3 with G1, Sensor length approx. 140 - 160 mm / 5.51 - 6.30"

Process connection

A G2 internal thread

B G2 internal thread with welded fitting h = 50 mm / 1.97"

C Flange DN 50 / PN 16 acc. to EN 1092/1

D Flange ANSI 2" / 150 lbs

COA 451- complete order code

ENDRESS+HAUSER

CLEANFIT COA 451

order code:

serial no.:

spec.

pressure: PN=10bar T=80°C

COA451-A2A

2 13879 05B75

CleanFit COA 451 Installation

Endress+Hauser 7

3 Installation

3.1 Incoming acceptance, transport, storage

•Make sure the packaging is undamaged!

Inform the supplier about damage to the packaging.

Keep the damaged packaging until the matter has been settled.

•Make sure the contents are undamaged!

Inform the supplier about damage to the delivery contents.

Keep the damaged products until the matter has been settled.

•Check that the scope of delivery is complete and agrees with your order and the

shipping documents.

•The packaging material used to store or to transport the product must provide shock

protection and humidity protection. The original packaging offers the best protection.

Also, keep to the approved ambient conditions (see "Technical data").

•If you have any questions, please contact your supplier or your Endress+Hauser

sales centre responsible (see back page of these Operating Instructions).

3.2 Installation conditions

3.2.1 Dimensions

C07-CUA451xx-06-07-en-003.eps

Fig. 2: Assembly with welding neck (short

lift)

* Dimensions depend on sensor, see

below

C07-CUA451xx-06-07-00-en-002.eps

Fig. 3: Assembly with flange connection

(long lift)

* Dimensions depend on sensor, see

below

C07-CUA451xx-06-07-00-en-001.eps

Fig. 4: Assembly in service position

** Assembly version with short lift

(see product structure)

*** There must be additional space of 350 mm (13.78") for sensor installation!

32 /

1.26 227 /

8.94

53 /

2.09

85 / 3.35

Ø 49.5/

Ø 1.95 mm /

inch

0.04

32 /

1.26

105 / 4.13

227 /

8.94

53 /

2.09

85 / 3.35

Ø 49.5/

Ø 1.95

mm /

inch

105

4.13

100

3.94

191** / 296

7.52** / 11.65

443** / 548

17.44** / 21.57 + 350 / 13.78* **

inch

* Dimension acc. to sensor type:

COS 31:

COS 41:

8 mm (0.31")

11 mm (0.43")

COS 3: 16 mm (0.63")

Installation CleanFit COA 451

8Endress+Hauser

3.2.2 Process connections

C07-CUA451xx-04-07-00-en-001.eps

Abb. 5: Process connections

A Internal thread G2

B Internal thread G2 with welded fitting

C Flange DN 50 / PN 16 and Flange ANSI 2" / 150 lbs

a: DN 50: Ø 125 (4.92"), ANSI 2": Ø 120.7 (4.75")

b: DN 50: Ø 165 (6.50"), ANSI 2": Ø 152.4 (6.00")

3.2.3 Notes on installation

The assembly is designed for installation on tanks and pipes. Suitable nozzles must be

available for this.

Installation place

Install the assembly at places with constant flow. The minimum pipe diameter is DN 80.

C07-COA451xx-11-07-00-en-001.eps

Fig. 6: Permissible and impermissible sensor installation positions

1 Ascending pipe, best position

2 Horizontal pipe, sensor top down, impermissible due to air cushion or foam bubble forming

3 Horizontal pipe, installation with permissible emitting angles (acc. to sensor version)

4 Overhead installation, impermissible due to missing electrolyte contact of the sensor electrodes

5 Down pipe, impermissible

Note!

•Do not install the assembly at places, where air cushions or foam bubbles can be

formed or where suspended particles can settle on the sensor optics (→Fig. 6).

•Measuring errors can occur, if:

– the sensor is not immersed into the medium

– suspended particles are settled on the sensor membrane

– the sensor is installed overhead.

CA B

32 / 1.26

mm / inch

Detail A,

(top view)

Detail A, rotated

(side view)

90°

CleanFit COA 451 Installation

Endress+Hauser 9

Orientation

Caution!

•Avoid a siphon effect1at the rinse chamber outlet when installing with inclined

orientation. The inlet to the rinse chamber must be from below.

3.3 Installation instructions

3.3.1 Measuring system

A complete measuring system comprises:

•CleanFit COA 451 assembly

•OxiMax W COS 31, OxiMax W COS 41 or OxiMax W COS 3 oxygen sensor

•Liquisys M COM 223/253 transmitter

C07-COA451xx-11-07-00-xx-003.eps

Fig. 7: Ascending pipe and tank side installation

αmin 15°

1 Medium flow direction

C07-COA451xx-11-07-00-xx-002.eps

Fig. 8: Tank top installation

αmin. 15°

1 Medium flow direction

190°

α α

1) Siphon effect: line emptied by vacuum

C07-COA451xx-14-05-00-xx-001.eps

Fig. 9: Measuring system

1 COS 31, COS 41 or COS 3

2 Liquisys M COM 253

3 COA 451

4 Medium flow direction

Installation CleanFit COA 451

10 Endress+Hauser

3.3.2 Installing the assembly into the process

Move the assembly into the "Service" position (outer sleeve inserted in the assembly)

and secure the assembly to the tank or the piping using your selected process

connection.

Note!

Depending on the process connection, please observe the following:

•Check the installation of the flange seal between the flanges.

3.3.3 Rinse water connection (optionally)

You can rinse the sensor in the Service position with a second ball valve for the rinse

chamber (see Accessories).

Connect the rinse water pipe to the designated rinse nozzle. Both rinse nozzles on the

assembly are identical. Use one as an inlet and the other as an outlet.

Operate the rinse water connection of the assembly with a water pressure of 2 to

max. 6 bar (29 to 87 psi). In addition, install a non-return valve and a dirt trap (100 µm)

in the water supply line (at the inlet to the assembly).

Caution!

If it is possible for the water pressure to rise above 6 bar (87 psi, including any transient

pressure surges), install a pressure reducing valve upstream. Otherwise the assembly

may be damaged.

Besides water, other or additional cleaning solutions may be used in the rinse chamber.

Pay attention to the material resistance of the assembly and comply with the maximum

permitted temperatures and pressures.

C07-CUA451xx-15-07-06-xx-001.eps

Fig. 10: Assembly in measuring mode (ball valve

open)

Hand lever for ball valve open/close

Process connection (Flange DN 50 / PN 16)

Outer sleeve

Locking pin

Fastening screws

Bayonet joint

Handle

Lubricator nipple

Air relief valve resp. rinse water connection

Otros manuales para Cleanfit COA451

Tabla de contenidos

Otros manuales de Equipos industriales de Endress+Hauser

Endress+Hauser

Endress+Hauser Tankvision Multi Scan NXA83 Manual de usuario

Endress+Hauser

Endress+Hauser Micropilot FMR50 Actualización de firmware

Endress+Hauser

Endress+Hauser Liquiline System CA80PH Especificaciones técnicas

Endress+Hauser

Endress+Hauser CleanFit CPA 451 Manual de usuario

Endress+Hauser

Endress+Hauser CleanFit P CPA 474 Manual de usuario

Endress+Hauser

Endress+Hauser HART Field Xpert Manual de usuario

Endress+Hauser

Endress+Hauser Soliwave FDR16 Manual de usuario

Endress+Hauser

Endress+Hauser Flexdip CYA112 Manual de usuario

Endress+Hauser

Endress+Hauser Soliwave FDR16 Especificaciones técnicas

Endress+Hauser

Endress+Hauser CleanFit P CPA 473 Manual de usuario

Endress+Hauser

Endress+Hauser TopCal S CPC 300 Manual de usuario

Endress+Hauser

Endress+Hauser Soliwave FQR56 Manual de usuario

Endress+Hauser

Endress+Hauser Cleanfit CPA875 Manual de usuario

Endress+Hauser

Endress+Hauser Cleanfit H CPA475 Manual de usuario

Endress+Hauser

Endress+Hauser Kit CSF48 Manual de usuario

Endress+Hauser

Endress+Hauser Analytik Jena CyBio Well vario Manual de usuario

Endress+Hauser

Endress+Hauser Stamoclean CAT430 Manual de usuario

Endress+Hauser

Endress+Hauser CleanFit CUA 451 Manual de usuario

Endress+Hauser

Endress+Hauser HART Proline Promass 500 Manual del operador

Endress+Hauser

Endress+Hauser SpectraSensors OXY5500 Guía de instalación

Endress+Hauser

Endress+Hauser Deltabar S PMD75 Manual del operador

Endress+Hauser

Endress+Hauser TOC Analyzer CA78 Manual de usuario

Endress+Hauser

Endress+Hauser Proline t-mass 300 Manual del operador

Endress+Hauser

Endress+Hauser Cerabar PMC11 Manual de usuario

Manuales populares de Equipos industriales de otras marcas

ABB

ABB Unifix AD Manual

Mark 7

Mark 7 Evolution Manual de usuario

Husky

Husky HyPET Manual de usuario

bora

bora PM-1800 Manual de usuario

Grizzly

Grizzly T32428 Manual de usuario

Siemens

Siemens 8MF1 Series Manual de usuario

ABB

ABB HT610965 Manual de usuario

ABB

ABB SafeLink Manual de usuario

Phoenix

Phoenix PHX-150 Manual de usuario

ABB

ABB A165-L32 Manual de usuario

ABB

ABB HT842936 Manual de usuario

Rioned

Rioned UrbanJet Manual de usuario

Hermetica

Hermetica 10 Series Manual de usuario

HORNER

HORNER OEE Solution Manual de usuario

Hammerhead

Hammerhead HG375 Manual de usuario

SCHUNK

SCHUNK VERO-S NSE-A3 138 Instrucciones de uso

ABB

ABB HT566657 Manual de usuario

Webasto

Webasto GSE CAN Manual de usuario