Endress+Hauser Turbimax CUS50D Manual de usuario

Products Solutions Services

Operating Instructions

Turbimax CUS50D

Absorption sensor for turbidity and solids

measurements

BA01846C/07/EN/01.18

71403460

2018-01-31

Turbimax CUS50D Table of contents

Endress+Hauser 3

Table of contents

1 About this document ........... 4

1.1 Warnings ........................... 4

1.2 Symbols used ........................ 4

1.3 Symbols on the device ................ 5

2 Basic safety instructions ....... 6

2.1 Requirements for personnel ........... 6

2.2 Designated use ...................... 6

2.3 Workplace safety .................... 6

2.4 Operational safety ................... 7

2.5 Product safety ....................... 7

3 Product description ............. 7

3.1 Product design ....................... 7

4 Incoming acceptance and

product identification ......... 10

4.1 Incoming acceptance ................ 10

4.2 Product identification ................ 11

4.3 Scope of delivery .................... 11

4.4 Certificates and approvals ............ 12

5 Installation .................... 13

5.1 Dimensions ........................ 13

5.2 Mounting the sensor ................ 15

5.3 Installation examples ................ 16

5.4 Post-installation check ............... 20

6 Electrical connection .......... 20

6.1 Connecting the sensor ............... 20

6.2 Ensuring the degree of protection ..... 22

6.3 Post-connection check ............... 22

7 Commissioning ................ 22

7.1 Function check ..................... 22

8 Operation ...................... 23

8.1 Adapting the measuring device to the

process conditions .................. 23

9 Diagnostics and

troubleshooting ............... 35

10 Maintenance .................. 36

10.1 Maintenance tasks .................. 36

11 Repairs ......................... 36

11.1 Spare parts ........................ 36

11.2 Return ............................ 37

11.3 Disposal ........................... 37

12 Accessories .................... 37

12.1 Assemblies ........................ 37

12.2 Holder ............................ 38

12.3 Mounting material .................. 38

12.4 Compressed air cleaning ............. 39

12.5 Calibration kit ...................... 39

13 Technical data ................. 40

13.1 Input .............................. 40

13.2 Performance characteristics .......... 41

13.3 Environment ....................... 42

13.4 Process ............................ 42

13.5 Mechanical construction ............. 42

Index ................................. 44

About this document Turbimax CUS50D

4 Endress+Hauser

1 About this document

1.1 Warnings

Structure of information Meaning

LDANGER

Causes (/consequences)

If necessary, Consequences of non-

compliance (if applicable)

‣Corrective action

This symbol alerts you to a dangerous situation.

Failure to avoid the dangerous situation will result in a fatal or serious injury.

LWARNING

Causes (/consequences)

If necessary, Consequences of non-

compliance (if applicable)

‣Corrective action

This symbol alerts you to a dangerous situation.

Failure to avoid the dangerous situation can result in a fatal or serious injury.

LCAUTION

Causes (/consequences)

If necessary, Consequences of non-

compliance (if applicable)

‣Corrective action

This symbol alerts you to a dangerous situation.

Failure to avoid this situation can result in minor or more serious injuries.

NOTICE

Cause/situation

If necessary, Consequences of non-

compliance (if applicable)

‣Action/note

This symbol alerts you to situations which may result in damage to property.

1.2 Symbols used

Symbol Meaning

Additional information, tips

Permitted or recommended

Not permitted or not recommended

Reference to device documentation

Reference to page

Reference to graphic

 Result of a step

Turbimax CUS50D About this document

Endress+Hauser 5

1.3 Symbols on the device

Symbol Meaning

Reference to device documentation

Basic safety instructions Turbimax CUS50D

6 Endress+Hauser

2 Basic safety instructions

2.1 Requirements for personnel

• Installation, commissioning, operation and maintenance of the measuring system may be

carried out only by specially trained technical personnel.

• The technical personnel must be authorized by the plant operator to carry out the specified

activities.

• The electrical connection may be performed only by an electrical technician.

• The technical personnel must have read and understood these Operating Instructions and

must follow the instructions contained therein.

• Faults at the measuring point may only be rectified by authorized and specially trained

personnel.

Repairs not described in the Operating Instructions provided must be carried out only

directly at the manufacturer's site or by the service organization.

2.2 Designated use

CUS50D is a sensor for measuring turbidity and solids and is specially designed for use in

industrial waste water and processes.

The sensor is particularly suited for use in the following applications:

• Turbidity measurements based on the principle of light attenuation (turbidimetry) in

accordance with EN ISO 7027

• Absorption measurements in liquid and highly absorbing media and sludges

• Measurement of concentration or solids content

• Measurement of solids content in process fluids

The chemical compatibility of materials, the temperature range and the pressure range must

be checked

Use of the device for any purpose other than that described, poses a threat to the safety of

people and of the entire measuring system and is therefore not permitted.

The manufacturer is not liable for damage caused by improper or non-designated use.

2.3 Workplace safety

As the user, you are responsible for complying with the following safety conditions:

• Installation guidelines

• Local standards and regulations

Electromagnetic compatibility

• The product has been tested for electromagnetic compatibility in accordance with the

applicable European standards for industrial applications.

• The electromagnetic compatibility indicated applies only to a product that has been

connected in accordance with these Operating Instructions.

Turbimax CUS50D Product description

Endress+Hauser 7

2.4 Operational safety

Before commissioning the entire measuring point:

1. Verify that all connections are correct.

2. Ensure that electrical cables and hose connections are undamaged.

3. Do not operate damaged products, and protect them against unintentional operation.

4. Label damaged products as defective.

During operation:

‣If faults cannot be rectified:

products must be taken out of service and protected against unintentional operation.

2.5 Product safety

2.5.1 State of the art

The product is designed to meet state-of-the-art safety requirements, has been tested, and

left the factory in a condition in which it is safe to operate. The relevant regulations and

European standards have been observed.

3 Product description

3.1 Product design

CUS50D is an absorption sensor for measuring turbidity and solids content. It features a glass,

non-adhesive sensor head with 2 path lengths (5 mm and 10 mm). Stainless steel and plastic

housing options are available.

CM44 transmitter for sensor operation.

Product description Turbimax CUS50D

8 Endress+Hauser

A0036825

 1 CUS50D sensor head

1 Light sources 10 mm (0.4 in)

2 Light sources 5 mm (0.2 in)

3 Light receiver 10 mm (0.4 in)

4 Light receiver 5 mm (0.2 in)

Turbimax CUS50D Product description

Endress+Hauser 9

A0036368

 2 Versions

A Clamp

B Air cleaning

3.1.1 Measuring principle

The sensor operates on the principle of light attenuation in accordance with ISO 7027 and

meets the requirements of this standard.

Suitable for average to high turbidity.

Incoming acceptance and product identification Turbimax CUS50D

10 Endress+Hauser

4 Incoming acceptance and product identification

4.1 Incoming acceptance

1. Verify that the packaging is undamaged.

 Notify the supplier of any damage to the packaging.

Keep the damaged packaging until the issue has been resolved.

2. Verify that the contents are undamaged.

 Notify the supplier of any damage to the delivery contents.

Keep the damaged goods until the issue has been resolved.

3. Check that the delivery is complete and nothing is missing.

 Compare the shipping documents with your order.

4. Pack the product for storage and transportation in such a way that it is protected

against impact and moisture.

 The original packaging offers the best protection.

Make sure to comply with the permitted ambient conditions.

If you have any questions, please contact your supplier or your local Sales Center.

Otros manuales para Turbimax CUS50D

Tabla de contenidos

Otros manuales de Accesorios de Endress+Hauser

Endress+Hauser

Endress+Hauser CCS120D Manual de usuario

Endress+Hauser

Endress+Hauser Dipfit W CLA111 Manual de usuario

Endress+Hauser

Endress+Hauser Liquipoint T Series Manual

Endress+Hauser

Endress+Hauser Deltapilot S FMB70 Instrucciones de instalación

Endress+Hauser

Endress+Hauser Deltapilot S DB50 Manual

Endress+Hauser

Endress+Hauser Proline 300 Especificaciones técnicas

Endress+Hauser

Endress+Hauser omnigrad M TR 44 Manual

Endress+Hauser

Endress+Hauser Deltabar S PMD70 Manual de usuario

Endress+Hauser

Endress+Hauser Nivector FTI26 Especificaciones técnicas

Endress+Hauser

Endress+Hauser Oxymax H COS21D Manual de usuario

Endress+Hauser

Endress+Hauser Oxymax COS61 Manual de usuario

Endress+Hauser

Endress+Hauser Memosens COL37E Manual de usuario

Endress+Hauser

Endress+Hauser OUSAF46 Manual de usuario

Endress+Hauser

Endress+Hauser Deltapilot M FMB50 Manual

Endress+Hauser

Endress+Hauser Liquiphant M FTL51C Manual de usuario

Endress+Hauser

Endress+Hauser Ceramax CPS341D Manual de usuario

Endress+Hauser

Endress+Hauser Turbimax W CUS65 Manual de usuario

Endress+Hauser

Endress+Hauser Oxymax W COS51D Manual de usuario

Endress+Hauser

Endress+Hauser Solitrend MMP42 Especificaciones técnicas

Endress+Hauser

Endress+Hauser Proline 800 Especificaciones técnicas

Endress+Hauser

Endress+Hauser NAR 300 Especificaciones técnicas

Endress+Hauser

Endress+Hauser Turbimax CUS71D Manual de usuario

Endress+Hauser

Endress+Hauser Proline Prosonic Flow P Especificaciones técnicas

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual de usuario

Manuales populares de Accesorios de otras marcas

Hillco

Hillco 2810 Manual de usuario

Siemens

Siemens QSA2700D Manual del operador

Contours

Contours ZY024 Manual de usuario

Saivod

Saivod VS621 Manual de usuario

Virtuox

Virtuox VirtuCLEAN 2.0 Manual de usuario

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manual de usuario

Z-Wave

Z-Wave HSD-200Z Manual de usuario

turck

turck FMX-IM-2UPLI63FX Manual de usuario

Decagon Devices

Decagon Devices 10HS Manual de usuario

UPPAbaby

UPPAbaby Cup Holder Manual de usuario

Elko

Elko SmartSensor Leakage Wireless Manual de usuario

Grizzly

Grizzly H8371 Manual de usuario

Panasonic

Panasonic HG-T Series Manual de usuario

IFM Electronic

IFM Electronic Efector 250 Series Guía de referencia

DigiDesign

DigiDesign 888/24 I/O Manual de usuario

PROZIS

PROZIS QUAY Manual de usuario

patagonia

patagonia PSI Vest Manual de usuario

SFC Energy

SFC Energy EFOY GO! Manual de usuario