EMTOP BB-ET6ULL Manual de usuario
BB-ET6ULL
SOM-ET6ULL + SOM-ET6ULL-BB
User Manual
Version: 1.0
2023-01-03
ii
Revision History：
Version
Date
Description
1.0
2023-01-03
Initial Release
iii
Table of Contents
1. PRODUCT OVERVIEW ............................................................................................ 4
1.1 INTRODUCTION .......................................................................................................4
1.2 HARDWARE FEATURES ........................................................................................... 4
1.2.1 SOM-ET6ULL ................................................................................................4
1.2.2 SOM-ET6ULL BB ..........................................................................................6
1.3 MECHANICAL DIMENSION ........................................................................................7
1.4 INTERFACE DETAILS ............................................................................................... 8
1.4.1 DC Power Input .............................................................................................8
1.4.2 USB Host .......................................................................................................8
1.4.3 Audio Input/Output ........................................................................................ 9
1.4.4 2x 1W Speaker Connector ..........................................................................10
1.4.5 10/100M Ethernet ........................................................................................11
1.4.6 DIN/DO ........................................................................................................12
1.4.7 CAN/RS485 .................................................................................................13
1.4.8 LCD ............................................................................................................. 14
1.4.9 Reset ........................................................................................................... 17
1.4.10 User Button ............................................................................................... 18
1.4.11 LED Indicator Light ....................................................................................19
1.4.12 TF Card ..................................................................................................... 20
1.4.13 4G ..............................................................................................................21
1.4.14 2.54mm Extension Interface .....................................................................23
1.4.15 USB Extension Interface ...........................................................................24
1.4.16 IO Extension ..............................................................................................25
1.4.17 Debug Port ................................................................................................ 26
1.4.18 Serial Download ........................................................................................27
4
1. Product Overview
1.1 Introduction
The SOM-ET6ULL BB is a baseboard that design by Emtop tech for the SO
M board SOM-ET6ULL. It features a lot of rich and flexible interfaces. Can be use
d for the customers to develop their user programs, verify their expected functions
and shorten product development cycle. The optional that with a box that can be
used directly by the customer, or they can be customized a box and used this Kit
directly for the productions.
1.2 Hardware Features
1.2.1 SOM-ET6ULL
Electrical Parameters
Working Temperature：0 °C~ 70°C（Commercial）
-45°C~ 85°C（Industrial）
Ambient Humidity：20% ~ 90%, non-condensing
Mechanical Dimensions：60mm x 27mm
Power Input：5V,1.8V/3.3V
Processor
Feature
Details
SOM-i.MX6ULL
Arm Cortex-A7 MPCore platform
Single ARM Cortex-A7 MPCore, including:
•32 KB L1 Instruction Cache
•32 KB L1 Data Cache
•Media Processing Engine (MPE)
5
Co-processor
•General Interrupt Controller(GIC)
•Global Timer
•Snoop Control Unit
•Target frequency of 528MHz
Audio
•S/PDIF Input and Output
•SAI modules supporting I2S,AC97,TDM
On-chip memory
•Boot ROM (96KB)
•Secure/non-secure RAM (32KB)
Memory and storage
DDR SDRAM
•512MB DDR3 SDRAM (16-bit bus width)
•Maximum 1GB support
•800MHz maximum DDR clock
eMMC
•4GB eMMC flash memory default
•8-bits MMC mode
•4~32GB storage option
•Nand or eMMC + SPI option
•256MB ~ 4GB storage option
Expandable flash (MicroSD)
•Meets SD/SDIO 3.0 standard Runs at
4-bits
•Supports system boot from SD card
•Supports high-capacity SDXC card up to
2TB
Network & Wireless
Ethernet
•10/100 Mbps Ethernet Controller
•Up to 2 MAC (6G2, 6G3 Only)
Hardware Interface
•5x UART
•2x ENET
6
I/O connectivity
•1x SDIO
•1x JTAG
•10x GPIOs
•10x SNVS_TAMPER
•2x OTG
Display Interfaces
• 24bits RGB LCD
Camera
• 8Bit CSI
1.2.2 SOM-ET6ULL BB
Electrical Parameters
Working Temperature：0 °C~ 70°C（Commercial）
-45°C~ 85°C（Industrial）
Ambient Humidity：20% ~ 90%, non-condensing
Mechanical Dimensions：135mm x 110mm
Power Input：12V/2A Maximum
Connectivity
2x 80Pin BTB Connector
12V Power Input;
6x USB 2.0 Host
Audio Input/Output
2x 1W Audio Output
2x 10/100Mbps Ethernet
1x RS385
1x CAN
2x DI
2x DO
1x 24Bits RGB LCD
1x TF Card Connector
7
1x MINI PCIe (For 4G module only)
1x SIM Card
1x MicroUSB Connector (For updated only)
1x 16Pin Extension Interface Include SPI, I2C and UART
1x 2.54mm Pin header for UART
1x 2.50mm Box header for Debug
1.3 Mechanical Dimension
8
1.4 Interface Details
1.4.1 DC Power Input
The SOM-ET6ULL BB places a DC Jack to feature a 12V power supply input. The
recommended power supply is 12V/2A. If some customized features are
requested, please contact the sales.
1) Part Reference：J4
2) Not special Pin1 is defined. The center is positive power input, and the negative
pole around.
3) Specification for the DC Jack as below:
1.4.2 USB Host
The SOM-ET6ULL BB order three double-deck USB type A connector to feature
six USB 2.0 host port for users.
1) Part Reference：J7, J9, J10.
2) Not special Pin1 is defined.
3) Specification for the double-deck USB Host as below:
9
1.4.3 Audio Input/Output
The SOM-ET6ULL BB order two 3.5mm audio connector to feature audio input
and audio output function. The audio output can drive a headphone directly and
the audio input can receive audio signal from microphone.
1) Part Reference：J16 for audio in, J13 for audio out.
2) Not special Pin1 is defined. The specification for the audio plug show as below:
10
3) Specification for the double-deck USB Host as below:
1.4.4 2x 1W Speaker Connector
The SOM-ET6ULL BB has two 2.00mm pin pitch 1x2pin WTB connectors that are
used for 1W stereo speaker internal. These interfaces can drive 1W per channel
into 8ΩBTL speaker.
1) Part Reference：J14, J15.
2) Not special Pin1 is defined.
3) Specification for the double-deck USB Host as below:
Tabla de contenidos
Otros manuales de Hardware de computadora de EMTOP
Manuales populares de Hardware de computadora de otras marcas
EMC2
EMC2 VNX Series Manual del propietario
Panasonic
Panasonic DV0PM20105 Manual de usuario
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Manual de usuario
Gigabyte
Gigabyte B660M DS3H AX DDR4 Manual de usuario
Raidon
Raidon iT2300 Manual de usuario
National Instruments
National Instruments PXI-8186 Manual de usuario
