Emerson World Class 3000 Manual de usuario

Instruction Manual

IB-106-300NH Rev. 4.3

May 2005

http://www.raihome.com

World Class 3000

Oxygen Analyzer

with IFT 3000 Intelligent

Field Transmitter

Emerson Process Management

Rosemount Analytical Inc.

Process Analytic Division

6565P Davis Industrial Parkway

Solon, OH 44139

T (440) 914 1261

F (440) 914 1271

E [email protected]

http://www.raihome.com

ESSENTIAL INSTRUCTIONS

READ THIS PAGE BEFORE PROCEEDING!

Rosemount Analytical designs, manufactures and tests its products to meet many national and

international standards. Because these instruments are sophisticated technical products, you

MUST properly install, use, and maintain them to ensure they continue to operate within their

normal specifications. The following instructions MUST be adhered to and integrated into your

safety program when installing, using, and maintaining Rosemount Analytical products. Failure to

follow the proper instructions may cause any one of the following situations to occur: Loss of life;

personal injury; property damage; damage to this instrument; and warranty invalidation.

•Read all instructions prior to installing, operating, and servicing the product.

•If you do not understand any of the instructions, contact your Rosemount Analytical repre-

sentative for clarification.

•Follow all warnings, cautions, and instructions marked on and supplied with the product.

•Inform and educate your personnel in the proper installation, operation, and mainte-

nance of the product.

•Install your equipment as specified in the Installation Instructions of the appropriate In-

struction Manual and per applicable local and national codes. Connect all products to the

proper electrical and pressure sources.

•To ensure proper performance, use qualified personnel to install, operate, update, program,

and maintain the product.

•When replacement parts are required, ensure that qualified people use replacement parts

specified by Rosemount Analytical. Unauthorized parts and procedures can affect the prod-

uct’s performance, place the safe operation of your process at risk, and VOID YOUR WAR-

RANTY. Look-alike substitutions may result in fire, electrical hazards, or improper operation.

•Ensure that all equipment doors are closed and protective covers are in place, except

when maintenance is being performed by qualified persons, to prevent electrical shock

and personal injury.

If a Model 275/375 Universal HART®Communicator is used with this unit, the software within

the Model 275/375 communicator may require modification. If a software modification is re-

quired, please contact your local Fisher-Rosemount Service Group or National Response

Center at 1-800-654-7768.

The information contained in this document is subject to change without notice.

HIGHLIGHTS OF CHANGES

Effective May, 1999 Rev. 4.0

Page Summary

Page P-6 Added new Quick Start Guide.

Page 3-1 Added Section 3, Setup.

Page 4-1 Removed calibration information from Operation section, and created

Section 4, Calibration.

Page 6-2 Expanded explanations of IFT status codes.

Section 6 Added new troubleshooting procedures.

Effective November, 2001 Rev. 4.1

Page Summary

Highlights Updated Highlights of Changes Appendix A page.

Appendix A Replaced Appendix A, Rev. 3.6 with Rev. 3.7.

Effective November, 2001 Rev. 4.2

Page Summary

Highlights Updated Highlights of Changes Appendix A page.

Page 4-1 Added reference to new Calibration Record sheet.

Page 4-9 Added new Calibration Record sheet.

Appendix A Replaced Appendix A, Rev. 3.7 with Rev. 3.8.

HIGHLIGHTS OF CHANGES (CONTINUED)

Effective May, 2005 Rev. 4.3

Page Summary

Highlights Updated Highlights of Changes Appendix A, B, D, E, J pages.

--- Changed “Rosemount” to “Rosemount Analytical”.

P-8 Revised Figure 2.

1-1 Revised Figure 1-1.

1-6 Revised Figure 1-3.

2-5, 2-6 Revised Figure 2-1, sheets 1 and 2.

2-9 Revised Figure 2-4.

2-13 Revised Figure 2-8.

2-14 Revised Figure 2-9.

2-15 Revised Figure 2-10.

2-18, 2-19 Revised Figure 2-14, sheets 1 and 2.

2-22 Revised Figure 2-18.

2-24 Revised Figure 2-20.

4-4 Revised Figure 4-1.

4-6 Revised Figure 4-3.

4-7 Revised Figure 4-4.

5-2 Revised Figure 5-1.

7-1 Changed RMR facility address.

Appendix A Replaced Appendix A, Rev. 3.8 with Rev. 3.9.

Appendix B Replaced Appendix B, Rev. 2.2 with Rev. 2.3.

Appendix D Replaced Appendix D, Rev. 2.4 with Rev. 2.5.

Appendix E Replaced Appendix E, Rev. 4.5 with Rev. 4.6.

Appendix J Replaced Appendix J, Rev. 1.1 with Rev. 1.2.

Back cover Changed Rosemount Analytical address.

HIGHLIGHTS OF CHANGES

APPENDIX A

Effective May, 1996 Rev. 3

Page Summary

--- General. Updated appendix to reflect probe design changes.

Page A-13 Added “Extended temperature by-pass arrangements” to Figure A-13

(Sheet 3 of 3)

Effective June, 1996 Rev. 3.1

Page Summary

Page A-13 Updated part ordering information.

Effective August, 1996 Rev. 3.2

Page Summary

Page A-25 Updated cell replacement kit part numbers for the probe.

Effective October, 1996 Rev. 3.3

Page Summary

Page A-6 Added NOTE to Figure A-7.

Effective January, 1997 Rev. 3.4

Page Summary

Page A-1 Added warning to read new safety instructions.

Page A-12 Added protective covers and grounds warning.

Page A-16 Added protective covers and grounds warning.

Effective February, 1998 Rev. 3.5

Page Summary

Page A-18 Changed screw torque in paragraph A-11h.

Effective July, 1998 Rev. 3.6

Page Summary

--- Changed test gas to calibration gas and reference gas to reference

air throughout the appendix.

HIGHLIGHTS OF CHANGES (CONTINUED)

Effective November, 2001 Rev. 3.7

Page Summary

A-8 Added new cup type diffusion assembly description, paragraph A-6.e.

and diffusion assembly illustrations, Figure A-13 and A-14.

A-26 Added new cup type diffusion assembly part numbers 4851B89G04

and 4851B90G04 to replacement parts list. Deleted stainless steel

diffuser assembly from replacement parts list.

Effective July, 2002 Rev. 3.8

Page Summary

A-13 Added troubleshooting symptoms 5 and 6 to Table A-2.

Effective May, 2005 Rev. 3.9

Page Summary

--- Changed “Rosemount” to “Rosemount Analytical”.

HIGHLIGHTS OF CHANGES

APPENDIX B

Effective February, 1992 Rev. 2

Page Summary

Page B-1 Figure B-1. New HPS 3000 Optional Class 1, Division 1, Group B

(IP56) Explosion-Proof Enclosure added.

Page B-11 Figure and Index No. column added to Table B-2. Replacement Parts

for Heater Power Supply.

Effective January, 1995 Rev. 2.1

Page Summary

Page B-3 Updated Figure B-3, Heater Power Supply Block Diagram for IB

consistency.

Effective January, 1997 Rev. 2.2

Page Summary

Page B-1 Added warning to read new safety instructions.

Page B-3 Corrected Table B-1 specifications list.

Page B-4 Added protective covers and grounds warning.

Page B-8 Added protective covers and grounds warning.

Page B-11 Added expanded fuse description.

Effective May, 2005 Rev. 2.3

Page Summary

--- Changed “Rosemount” to “Rosemount Analytical”.

HIGHLIGHTS OF CHANGES

APPENDIX D

Effective June, 1994 Rev. 2

Page Summary

Page D-1

Page D-2

Page D-3

Page D-4

Page D-7

Page D-8

Page D-10

Page D-11

MPS outline drawing changed to show new MPS.

MPS interior view replaced with new MPS in Figure D-2.

"Optional" for check valve deleted in Figure D-3.

Drawing showing location of optional Z-Purge added as Figure D-4.

Power supply replacement procedures in paragraph D-7 changed to

reflect new design in the MPS. Solenoid valve replacement proce-

dures in paragraph D-8 changed to reflect new design in the MPS.

Old exploded view of MPS replaced with new MPS.

Paragraph D-11, Adding Probes to the new MPS, added.

Change part numbers for the power supply, solenoid valve, and test

gas flowmeter assembly. Add part numbers for reference gas flow-

meter assembly and all the parts in the probe adder kit.

Effective January, 1995 Rev. 2.1

Page Summary

Page D-1 Updated Figure D-1, MPS 3000 to include hinge.

Effective May, 1996 Rev. 2.2

Page Summary

Page D-11 Updated replacement parts list to reflect new part numbers.

Effective January, 1997 Rev. 2.3

Page Summary

Page D-1

Page D-2

Page D-5

Page D-7

Page D-11

Added warning to read new safety instructions.

Corrected Table D-1 Specifications listing, 1st entry.

Added protective covers and grounds warning.

Added protective covers and grounds warning, corrected item num-

ber errors in paragraph D-6.

Added expanded fuse descriptions.

HIGHLIGHTS OF CHANGES (CONTINUED)

Effective July, 1998 Rev. 2.4

Page Summary

--- Changed test gas to calibration gas and reference gas to reference

air throughout the appendix.

Effective May, 2005 Rev. 2.5

Page Summary

--- Changed “Rosemount” to “Rosemount Analytical”.

D-3 Revised view of check valve in Figure D-3.

Otros manuales para World Class 3000

Tabla de contenidos

Otros manuales de Instrumento de medición de Emerson

Emerson

Emerson Rosemount TCL Manual de usuario

Emerson

Emerson Rosemount 8750W Manual de usuario

Emerson

Emerson Rosemount 8750WB Manual de usuario

Emerson

Emerson Rosemount 5900 Guía rápida

Emerson

Emerson Daniel 3410 Series Manual de usuario

Emerson

Emerson Daniel 3818 Manual de usuario

Emerson

Emerson Rosemount CT5100 Manual de usuario

Emerson

Emerson Daniel Series Manual de usuario

Emerson

Emerson Daniel Series Manual de usuario

Emerson

Emerson MRLDS-250 Instrucciones de funcionamiento

Emerson

Emerson Rosemount 6888C Manual de usuario

Emerson

Emerson Asco 890 Series Manual de usuario

Emerson

Emerson Rosemount X-Stream Series Manual de usuario

Emerson

Emerson Micro Motion Guía rápida

Emerson

Emerson Rosemount Xi Manual de usuario

Emerson

Emerson Daniel 3812 Manual de programación

Emerson

Emerson FB1100 Manual de lista de piezas

Emerson

Emerson Rosemount 8700 Series Guía de configuración

Emerson

Emerson Rosemount Clarity II T56 Manual de usuario

Emerson

Emerson Energy Meter Manual de usuario

Emerson

Emerson FB1100 Manual de usuario

Emerson

Emerson Rosemount Ultrasonic 3810 Series Guía de inicio rápido

Emerson

Emerson Rosemount MCL-220 Manual de usuario

Emerson

Emerson 8800C Manual de usuario

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario