Emerson FM-3 Manual de usuario

P/N 400508-02

Revision: A2

Date: August 23, 2000

FM-3Programming Module

Installation Manual

Get other manuals https://www.bkmanuals.com

InformationfurnishedbyEMERSONMotionControlisbelievedtobeaccurateandreliable.However,

no responsibility is assumed by EMERSON Motion Control for its use. EMERSON Motion Control

reserves the right to change the design or operation of the equipment described herein and any

associated motion products without notice. EMERSON Motion Control also assumes no responsibility

for any errors that may appear in this document. Information in this document is subject to change

without notice.

P/N 400508-02

Revision: A2

Date: August 23, 2000

FM-3

Programming Module

Installation Manual

Get other manuals https://www.bkmanuals.com

Part Number: 400508-02

Revision: A2

Date: August 2000

Printed in United States of America

Information in this document is subject to change without notice. Companies, names, and data used in

examples herein are fictitious unless otherwise noted. No part of this document may be reproduced or

transmitted in any form or by any means, electronic or mechanical, for any purpose, without the

express written permission of EMERSON Motion Control.

The following are trademarks of EMERSON Motion Control and may not be reproduced in any

fashion without written approval of EMERSON Motion Control: EMERSON Motion Control,

EMERSON Motion Control PowerTools.

EMERSON Motion Control, a Division of Emerson Electric Co.

EMERSON Motion Control, Inc.is not affiliated with Microsoft Corporation, owner of the MicroSoft,

Windows, and Windows NT trademarks.

This document has been prepared to conform to the current released version of the product. Because

of our extensive development efforts and our desire to further improve and enhance the product,

inconsistencies may exist between the product and documentation in some instances. Call your

customer support representative if you encounter an inconsistency.

Get other manuals https://www.bkmanuals.com

iii

Customer Service

It is EMERSON Motion Control’s goal to ensure your greatest possible satisfaction with the

operation of our products. We are dedicated to providing fast, friendly, and accurate

assistance. That is why we offer you so many ways to get the support you need. Whether by

phone, fax or modem, you can access EMERSON Motion Control support information 24

hours a day, seven days a week.

EMERSON Motion Control

12005 Technology Drive

Eden Prairie, Minnesota 55344

U.S.A.

FAX (952)995-8011

You can FAX questions and comments to EMERSON Motion Control. Just send a FAX to

the number listed above.

Website: www.emersondrivesolutions.com

If you have Internet capabilities, you also have access to technical support using our Website

at http://www.emersondrivesolutions.com. The Website includes technical notes, frequently

asked questions, release notes and other technical documentation. This direct technical

support connection lets you request assistance and exchange software files electronically.

Service Support (952)995-8033

EMERSON Motion Control’s products are backed by a team of professionals who will

service your installation wherever it may be. Our customer service center in Eden Prairie,

Minnesota is ready to help you solve those occasional problems over the telephone. Our

customer service center is available 24 hours a day for emergency service to help speed any

problem solving. Also, all hardware replacement parts, should they ever be needed, are

available through our customer service organization.

When you call, please be at your computer, have your documentation in hand, and be

prepared to provide the following information:

Product version number, found by choosing About from the Help menu.

The type of controller or product you are using.

Exact wording of any messages that appear on your screen.

What you were doing when the problem occurred.

How you tried to solve the problem.

You can also contact us by email: service@emersondrivesolutions.com

Get other manuals https://www.bkmanuals.com

Need on-site help? EMERSON Motion Control provides service, in most cases, the next day.

Just call EMERSON’s customer service center when on-site service or maintenance is

required.

Training Services (800)397-3786 or Fax (952)995-8011

EMERSON Motion Control maintains a highly trained staff of instructors to familiarize

customers with EMERSON Motion Control’s products and their applications. A number of

courses are offered, many of which can be taught in your plant upon request.

Application Engineering (800)893-2321

An experienced staff of factory application engineers provides complete customer support for

tough or complex applications. Our engineers offer you a broad base of experience and

knowledgeof electronic motion control applications. Applicationengineers may be contacted

by email at applengr@emersondrivesolutions.com or at the telephone number listed above.

Sales: (952)995-8000

Email: [email protected]

Authorized EMERSON Motion Control distributors may place orders directly with our Order

Processing department by calling the number listed above. For information on your local

distributor, call EMERSON Motion Control.

Get other manuals https://www.bkmanuals.com

Document Conventions

Manual conventions have been established to help you learn to use this manual quickly and

easily. As much as possible, these conventions correspond to those found in other Microsoft®

Windows®1documentation.

Menu names and options are printed in bold type: the File menu.

Dialog box names begin with uppercase letters: the Axis Limits dialog box.

Dialog box field names are in quotes: “Field Name”.

Button names are in italic: OK button.

Source code is printed in Courier font: Case ERMS.

In addition, you will find the following typographic conventions throughout this manual.

Special nomenclature is provided for people working with these products, as follows:

Warning

For the purpose of this manual and product, “Warning” indicates death, severe personal

injury or substantial property damage CAN result if proper precautions are not taken.

Caution

For the purpose of this manual and product, “Caution” indicates minor personal injury or

property damage CAN result if proper precautions are not taken.

Note

For the purpose of this manual and product, “Note” indicates information about the

product or the respective part of the manual which is essential to highlight.

Throughout this manual, the word “drive” refers to an E Series drive.

1.See page ii of the preface.

This Represents

bold Characters that you must type exactly as they appear. For example, if you are directed to type

a:setup, you should type all the bold characters exactly as they are printed.

italic Place holders for information you must provide. For example, if you are directed to type

filename, you should type the actual name for a file instead of the word shown in italic type.

ALL CAPITALS Directory names, file names, key names, and acronyms.

SMALL CAPS Non-printable ASCII control characters.

KEY1+KEY2

example: (Alt+F) A plus sign (+) between key names means to press and hold down the first key while you press

the second key.

KEY1,KEY2

example: (Alt,F) A comma (,) between key names means to press and release the keys one after the other.

Get other manuals https://www.bkmanuals.com

Safety Instructions

General Warning

Failure to follow safe installation guidelines can cause death or serious injury. The voltages

used in the product can cause severe electric shock and/or burns, and could be

lethal.Extreme care is necessary at all times when working with or adjacent to it. The

installation must comply with all relevant safety legislation in the country of use.

Qualified Person

For the purpose of this manual and product, a “qualified person” is one who is familiar with

the installation, construction and operation of the equipment and the hazards involved. In

addition, this individual has the following qualifications:

•Is trained and authorized to energize, de-energize, clear, ground and tag circuits and

equipment in accordance with established safety practices.

•Is trained in the proper care and use of protective equipment in accordance with

established safety practices.

•Is trained in rendering first aid.

Reference Materials

The following related reference and installation manuals may be useful with your particular

system.

•FM-3 Speed Module Reference Manual (P/N 400508-01)

•Epsilon Eb and E Series EN Drives Reference Manual (P/N 400501-01)

Get other manuals https://www.bkmanuals.com

vii

Safety Considerations

Safety Precautions

This product is intended for professional integration into a complete system. If you install the

product incorrectly, it may present a safety hazard. The product and system may use high

voltages and currents, carry a high level of stored electrical energy, or control mechanical

equipment that can cause injury.

You should give close attention to the electrical installation and system design to avoid

hazards either in normal operation or in the event of equipment malfunction. System design,

installation, commissioning and maintenance must be carried out by personnel who have the

necessarytraining and experience. Read andfollowthis safety information and theinstruction

manual carefully.

Enclosure

This product is intended to be mounted in an enclosure which prevents access except by

trained and authorized personnel, and which prevents the ingress of contamination. This

product is designed for use in an environment classified as pollution degree 2 in accordance

with IEC664-1. This means that only dry, non-conducting contamination is acceptable.

Setup, Commissioning and Maintenance

It is essential that you give careful consideration to changes to drive settings. Depending on

the application, a change could have an impact on safety. You must take appropriate

precautions against inadvertent changes or tampering. Restoring default parameters in certain

applications may cause unpredictable or hazardous operation.

Safety of Machinery

Within the European Union all machinery with which this product is used must comply with

Directive 89/392/EEC, Safety of Machinery.

The product has been designed and tested to a high standard, and failures are very unlikely.

However the level of integrity offered by the product’s control function – for example stop/

start, forward/reverse and maximum speed – is not sufficient for use in safety-critical

applications without additional independent channels of protection. All applications where

malfunction could cause injury or loss of life must be subject to a risk assessment, and further

protection provided where needed.

Warning

General warning

Failure to follow safe installation guidelines can cause death or serious injury. The voltages used in

this unit can cause severe electric shock and/or burns, and could be lethal. Extreme care is necessary

at all times when working with or adjacent to this equipment. The installation must comply with all

Get other manuals https://www.bkmanuals.com

viii

relevant safety legislation in the country of use.

AC supply isolation device

The AC supply must be removed from the drive using an approved isolation device or disconnect

before any servicing work is performed, other than adjustments to the settings or parameters

specified in the manual. The drive contains capacitors which remain charged to a potentially lethal

voltage after the supply has been removed. Allow at least 3 minutes for Epsilon and 30 seconds for

E Series drives after removing the supply before carrying out any work which may involve contact

with electrical connections to the drive.

Products connected by plug and socket

A special hazard may exist where the drive is incorporated into a product which is connected to the

AC supply by a plug and socket. When unplugged, the pins of the plug may be connected to the

drive input, which is only separated from the charge stored in the bus capacitor by semiconductor

devices. To avoid any possibility of electric shock from the pins, if they are accessible, a means

must be provided for automatically disconnecting the plug from the drive (that is, a latching

contactor).

Grounding (Earthing, equipotential bonding)

The drive must be grounded by a conductor sufficient to carry all possible fault current in the event

of a fault. The ground connections shown in the manual must be followed.

Fuses

Fuses or over-current protection must be provided at the input in accordance with the instructions

in the manual.

Isolation of control circuits

The installer must ensure that the external control circuits are isolated from human contact by at

least one layer of insulation rated for use at the applied AC supply voltage.

Get other manuals https://www.bkmanuals.com

Tabla de contenidos

Otros manuales de Unidad de control de Emerson

Emerson

Emerson Fisher Vee-Ball SS-84PSV4 Manual de usuario

Emerson

Emerson Alco Controls CX2 Manual de usuario

Emerson

Emerson ALCO Thermo TX6 Manual de usuario

Emerson

Emerson Fisher GX Manual de usuario

Emerson

Emerson EIM 2000 Series Manual de usuario

Emerson

Emerson 8323G0 Series Instrucciones de instalación y funcionamiento

Emerson

Emerson Clarkson series Manual de usuario

Emerson

Emerson Tartarini BM5 Series Manual de usuario

Emerson

Emerson Yarway 7100 Series Manual de usuario

Emerson

Emerson PACSystems RX3i IEC 61850 Manual de usuario

Emerson

Emerson KTM Hindle 300 Series Manual de usuario

Emerson

Emerson Daniel 770 Manual de usuario

Emerson

Emerson Fisher A11 Manual de usuario

Emerson

Emerson Asco 330 Series Manual de usuario

Emerson

Emerson Fisher G101 Series Manual de usuario

Emerson

Emerson FieldQ QC4124 V DC Manual de usuario

Emerson

Emerson Fisher Slurry Vee-Ball V300S Manual de usuario

Emerson

Emerson KTM VIRGO N Series Manual

Emerson

Emerson KGA Manual de usuario

Emerson

Emerson RSTi-OM Manual de usuario

Emerson

Emerson Fisher Baumann 26000 Manual de usuario

Emerson

Emerson Fisher N100 Series Manual de usuario

Emerson

Emerson Tartarini V Series Manual de usuario

Emerson

Emerson Fisher VS100 Series Manual de usuario

Manuales populares de Unidad de control de otras marcas

Festo

Festo Compact Performance CP-FB6-E Manual de lista de piezas

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manual de usuario

JS Automation

JS Automation MPC3034A Manual de usuario

JAUDT

JAUDT SW GII 6406 Series Guía rápida

Spektrum

Spektrum Air Module System Manual de usuario

BOC Edwards

BOC Edwards Q Series Manual de usuario

KHADAS

KHADAS BT Magic Manual de usuario

Etherma

Etherma eNEXHO-IL Manual de usuario

PMFoundations

PMFoundations Attenuverter Manual de usuario

GEA

GEA VARIVENT Manual de usuario

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manual de usuario

Altronix

Altronix LINQ8PD Instrucciones de montaje

Eaton

Eaton Powerware Series Manual de usuario

WAGO

WAGO 750-407/040-000 Manual de usuario

Sony

Sony CCU-590 Manual de usuario

Graco

Graco 25D614 Manual de usuario

Task Force Tips

Task Force Tips YE-RF-900 Manual de programación

Shini

Shini SPV-U Series Manual de usuario