Elite Screens Insta-RP2 Screen Series Manual de usuario

Insta-RP2 Screen Series

Self-Adhesive Rear Projection Screen Film

Installation Guide

PRECAUTIONS

1. This product is an adhesive rear-projection screen that can be applied to various surfaces such

as transparent glass or acrylic.

2. This product is made for a one-time application. It has a non-reusable adhesive that bonds

firmly to a window surface. If the window has any layer treatment such as tinting, it is likely

that the layering will be damaged upon removal of the screen.

3. To ensure an even and “bubble-free” installation, make sure that the window surface is clean

and evenly moistened previous to installation.

4. Do not fold the Insta-RP2 Screen’s material. Folding will result in a permanent crease that

cannot be removed.

5. Avoid touching the screen with any hard or sharp objects that may cut, scratch or otherwise

deface the material.

6. The Insta-RP2 Screen is applied to a moist surface. This can impact the installation of the

material by possibly creating slight ripples or bubbling. These will disappear within the first few

weeks as the micro-droplets of water trapped in the adhesive evaporate.

Contents of this package Pad

Please make sure that all parts listed below are included. Contact Elite Screens Immediately if anything is

missing.

a. b.

Parts List

QTY

a. Insta-RP2 Screen Material

1

b. Microfiber cleaning cloth

1

Installation

1. Use a spray bottle filled with water and a mild detergent (1:1000 ratio column)

2. Thoroughly clean the glass surface using the correct glass-cleaning equipment

3. Make sure that the glass surface is smooth (unblemished) and perfectly flat.

4. Cut the screen to fit the required size of the product

5. Partially separate the film from the screen’s adhesive backing.

(*Tip, it is easier to apply the screen while separating the film from the adhesive at the same

time. This keeps the material from sticking together or going on unevenly)

6. Spray applicators are ideal to evenly spread the moisture before attaching the screen material

to the glass.

7. Carefully smooth out the surface (preferably using latex gloves) to ensure that the screen is

level with no bubbles or ripples present.

8. Now that the material is perfectly flat, make sure that it is properly aligned.

9. Use of a leveling brush or scraper will eliminate the residual moisture and make sure that the

material has been applied properly.

10. Allow material to stand unused for 2 to 3 hours to allow the adhesive to bond and set.

For a local Elite Screens contact or Technical Support, please visit

www.elitescreens.com

Tabla de contenidos

Otros manuales de Pantalla de proyección de Elite Screens

Elite Screens

Elite Screens Spectrum Tension Series Manual de usuario

Elite Screens

Elite Screens Vmax Series Guía de referencia rápida

Elite Screens

Elite Screens PicoScreen Series Manual de usuario

Elite Screens

Elite Screens M170XWS1 Manual de usuario

Elite Screens

Elite Screens Elite Tripod Series Manual de usuario

Elite Screens

Elite Screens Daywalker Series Manual de usuario

Elite Screens

Elite Screens EDGE FREE Aeon StarBright 9 Series Manual de usuario

Elite Screens

Elite Screens Evanesce Tension Series Manual de usuario

Elite Screens

Elite Screens Home100IWH2-A Manual de usuario

Elite Screens

Elite Screens VMAX 2 Series Manual de usuario

Elite Screens

Elite Screens Tripod B Series Manual de usuario

Elite Screens

Elite Screens Spectrum 2 Series Guía de referencia rápida

Elite Screens

Elite Screens EDGE FREE Aeon AcousticPro UHD Series Manual de usuario

Elite Screens

Elite Screens ezFrame Series Manual de usuario

Elite Screens

Elite Screens Home100IWH3 Manual de usuario

Elite Screens

Elite Screens VMAX113XWS Guía del usuario

Elite Screens

Elite Screens Spectrum Series Manual de usuario

Elite Screens

Elite Screens Starling Tension Series Manual de usuario

Elite Screens

Elite Screens Saker Tension Series Manual de usuario

Elite Screens

Elite Screens AR2 Series Manual de usuario

Elite Screens

Elite Screens Manual SRM Pro Series Manual de instrucciones

Elite Screens

Elite Screens YARD MASTER MANUAL SERIES Manual de usuario

Elite Screens

Elite Screens TE100HC2 Manual de usuario

Elite Screens

Elite Screens Elite Home 2 Series Manual de usuario

Manuales populares de Pantalla de proyección de otras marcas

FART PRODUKT

FART PRODUKT Standard SCREEN Manual de usuario

Draper

Draper E Series Manual

Laarhoven

Laarhoven Companion II Manual de usuario

Renogy

Renogy RMS-LFPS-US Manual de usuario

Da-Lite

Da-Lite ExecutiveElectrol Manual de usuario

Samsung

Samsung S*H65* Manual de usuario

FONESTAR

FONESTAR PPTR-43100-FA Manual de usuario

Slide Clear

Slide Clear Varro XL Manual de usuario

OS

OS РХ-090Н Manual de usuario

Niko

Niko 10-845 Manual de usuario

Speaka Professional

Speaka Professional 2357532 Manual de funcionamiento

Sima

Sima XL-72 Manual de usuario

Jasic

Jasic EVO 2.0 ET-200P Manual de usuario

InFocus

InFocus SC-WALL GRY-92H Manual

Barco

Barco OverView MVL-615 Manual de usuario

Draper

Draper Envoy Manual

SI

SI Dynamic 2 XL Manual de usuario

Draper

Draper Nocturne+ E Instrucciones de instalación