Elinx EIR410-2SFP-T Manual de usuario

Manual Documentation Number EIR410-2SFP-T– 0109m

www.bb-elec.com

www.bb-europe.com

-2

P-

-T

i Manual Documentation Number EIR410-2SFP-T – 0109m

www.bb-elec.com

www.bb-europe.com

-2

P-

-T

-2

P-

-T

T-

International

Headquarters

International Headquarters

B&B Electronics Mfg. Co. Inc.

707 Dayton Road

Ottawa, IL 61350 USA

Phone (815) 433-5100 -- General Fax (815) 433-5105

Website: www.bb-elec.com

European Headquarters

B&B Electronics Ltd.

Westlink Commercial Park

Oranmore, Co. Galway, Ireland

Phone +353 91-792444 -- Fax +353 91-792445

Website: www.bb-europe.com

form or by any means, electronic or mechanical, including photography, recording, or any information

storage and retrieval system without written consent. Information in this manual is subject to change

without notice, and does not represent a commitment on the part of B&B Electronics Mfg. Co. Inc.

B&B Electronics Mfg. Co. Inc. shall not be liable for incidental or consequential damages resulting from

the furnishing, performance, or use of this manual.

All Brand names used in this manual are the registered trademarks of their respective owners. The use of trademarks or other

designations in this publication is for reference purposes only and does not constitute an endorsement by the trademark holder

Table of Contents

1. Introduction................................................................................................................................1

Features.........................................................................................................................1

Package List..................................................................................................................2

2. Hardware Description................................................................................................................3

Physical Dimension.......................................................................................................3

Front Panel....................................................................................................................3

Top View........................................................................................................................4

LED Indicators...............................................................................................................5

Ports ..............................................................................................................................6

Cabling.........................................................................................................................10

Wiring the Power Inputs ..............................................................................................11

Wiring the Fault Alarm Contact....................................................................................12

3. Mounting Installation...............................................................................................................13

DIN-Rail Mounting .......................................................................................................13

Wall or Panel Mount Plate Mounting...........................................................................15

4. Hardware Installation ..............................................................................................................16

Installation Steps.........................................................................................................16

5. Network Application................................................................................................................17

6. Troubleshooting.......................................................................................................................18

7. Technical Specification...........................................................................................................19

ii Manual Documentation Number EIR410-2SFP-T – 0109m

www.bb-elec.com

www.bb-europe.com

Introduction

The EIR410-2SFP-T is an industrial DIN mount, unmanaged 10 port Ethernet switch with

Gigabit capability. It has (8) 10/100 copper Ethernet ports and (2) Gigabit Combo ports

that support copper or SFP module connections.

Features

•System Interface/Performance

oRJ-45 port support Auto MDI/MDI-X Function

oSFP (Mini-GBIC) supports 100/1000 Dual Mode

oStore-and-Forward Switching Architecture

oBack-plane (Switching Fabric): 5.6Gbps

o1Mbits Packet Buffer

o8K MAC Address Table

oSupports Wide Operating Temperature of -40 to 75oC

•Power Supply

oWide-range Redundant Power Design

oPower Reverse Polarity Protected

oOverload Current Removable Fuse Present

•Case/Installation

oIP-30 Protection

oDIN Rail and Wall Mount Design

•Provides surge protection 3,000 VDC for power line

•Supports 6,000 VDC Ethernet ESD protection

1Manual Documentation Number EIR410-2SFP-T – 0109m

www.bb-elec.com

www.bb-europe.com

Introduction

2 Manual Documentation Number EIR405-T – 0109m

www.bb-elec.com

www.bb-europe.com

Package List

•(1) EIR410-2SFP-T, 10 Port Gigabit Industrial Ethernet Switch

•(1) Quick Start Guide

•(1) CD ROM with User Manual

•(2) Wall Mounting Bracket and Screws

Hardware Description

Physical Dimension

(W x D x H) is 72mm x 105mm x 152mm (2.8 x 4.1 x 6.0 inches)

Front Panel

The Front Panel of the EIR410-2SFP-T is shown below.

3Manual Documentation Number EIR410-2SFP-T – 0109m

www.bb-elec.com

www.bb-europe.com

Hardware Description

4 Manual Documentation Number EIR405-T – 0109m

www.bb-elec.com

www.bb-europe.com

Top View

The top panel view of the EIR410-2SFP-T is equipped with one terminal block connector

that consists of two 12 to 48 VDC power inputs and the fault alarm output.

Hardware Description

5 Manual Documentation Number EIR405-T – 0109m

www.bb-elec.com

www.bb-europe.com

LED Indicators

LED Status Meaning

Green Power 1 is active

PWR1 Off No power at input 1

Green Power 2 is active

PWR2 Off No power at input 2

Red Power 1 or Power 2 is

inactive

Fault

Off

Power 1 and 2 are both

functional, or no power is

applied

Green Connected to network

Blinks Networking is active

P9, P10

(10/100/1000T,Upper LED)

Off Not connected to network

Green The port is operating at

speed of 1000M

P9, P10

(10/100/1000T, Lower LED) Off

The port is disconnected or

operating at speed of

10/100M

Green SFP port is linking

Blinks Data is transmitting or

receiving

Link/Active

(P9, P10 SFP)

Off Not connected to network

P1 to P8 On Connected to network

Hardware Description

6 Manual Documentation Number EIR405-T – 0109m

www.bb-elec.com

www.bb-europe.com

Blinks Networking is active

(Green LED)

Off Not connected to network

On Full duplex operation

Blinks Collision of packets occurs

P1 to P8

(Yellow LED) Off Half duplex operation or not

connected to network

Ports

•RJ-45 ports

•RJ-45 ports: Eight RJ-45 ports auto-sense for 10, 100 Mbps while two ports auto-sense

for 10, 100 or 1000 Mbps device connections. The auto MDI/MDIX feature allows

connections to switches, workstation and other equipment without changing straight

through or crossover cabling. The charts below show the cable pin assignments for

straight through and crossover cables.

•RJ-45 Pin Assignments

Pin Number Assignment

1 Tx+

2 Tx-

3 Rx+

6 Rx-

Note “+” and “-” signs represent the polarity of each wire pair.

All copper ports on the EIR410-2SFP-T support automatic MDI/MDI-X operation, you can

use straight-through cables (See Figure below) for all network connections to PCs or servers,

Hardware Description

7 Manual Documentation Number EIR405-T – 0109m

www.bb-elec.com

www.bb-europe.com

or to other switches or hubs. In straight-through cables, pins 1, 2, 3, and 6, at one end of the

cable, are connected straight through to pins 1, 2, 3 and 6 at the other end of the cable. The

table below shows the 10BASE-T / 100BASE-TX MDI and MDI-X port pin outs.

Pin MDI-X Signal Name MDI Signal Name

1 Receive Data plus (RD+) Transmit Data plus (TD+)

2 Receive Data minus (RD-) Transmit Data minus (TD-)

3 Transmit Data plus (TD+) Receive Data plus (RD+)

6 Transmit Data minus (TD-) Receive Data minus (RD-)

Straight Through Cable Schematic

Cross Over Cable Schematic

•2 Gigabit Copper/SFP (mini-GBIC) combo ports:

The EIR410-2SFP-T has two auto-detect Giga ports—copper/Fiber combo ports. The

Gigabit Copper (10/100/1000T) ports should use Category 5e or above UTP/STP cable for

connection. The SFP slots support dual mode which can switch the connection speed

between 100 and 1000Mbps. These SFP slots can be used to connect the network segment

with single or multi-mode fiber. You must choose appropriate mini-GBIC module to plug

into the slots. Make sure the module is aligned correctly and then slide the module into the

Tabla de contenidos

Otros manuales de Enrutador de red de Elinx

Elinx

Elinx EIRP305-24V-T Manual de usuario

Elinx

Elinx EIR405-T Manual de usuario

Elinx

Elinx ESW726 Family Manual de usuario

Manuales populares de Enrutador de red de otras marcas

Allnet

Allnet ALL0333AU Manual de usuario

HomeSeer

HomeSeer HT-SEL Manual de usuario

Sercomm

Sercomm Genesis OC3505D Manual de usuario

Billion

Billion BIPAC 5102 Series Manual de usuario

TP-Link

TP-Link TD-8817 Manual de usuario

Motorola

Motorola MR1900 Manual de usuario

Digi

Digi IX14 Manual de usuario

Cisco

Cisco NCS 540 Manual

XAVi

XAVi X8821e Manual de usuario

BEC

BEC 6200WZL Manual de usuario

MikroTik

MikroTik hAP ac3 Series Manual de usuario

Korenix

Korenix JetNet 5428G Series Manual de usuario

NETGEAR

NETGEAR FS526T - Switch Manual de usuario

Korenix

Korenix JetNet 5710G Series Manual de usuario

Automated Logic

Automated Logic ZN551 Manual del propietario

Cisco

Cisco ASR 1000 Series Manual del operador

EnGenius

EnGenius ESR-9710 Manual de usuario

Cisco

Cisco 805 Series Instrucciones de funcionamiento y seguridad