Elinx EIR405-T Manual de usuario

i Manual Documentation Number EIR405-T – 0109m

www.bb-elec.com

www.bb-europe.com

-T

ii Manual Documentation Number EIR405-T – 0109m

www.bb-elec.com

www.bb-europe.com

T-

International

Headquarters

International Headquarters

B&B Electronics Mfg. Co. Inc.

707 Dayton Road

Ottawa, IL 61350 USA

Phone (815) 433-5100 -- General Fax (815) 433-5105

Website: www.bb-elec.com

European Headquarters

B&B Electronics Ltd.

Westlink Commercial Park

Oranmore, Co. Galway, Ireland

Phone +353 91-792444 -- Fax +353 91-792445

Website: www.bb-europe.com

form or by any means, electronic or mechanical, including photography, recording, or any information

storage and retrieval system without written consent. Information in this manual is subject to change

without notice, and does not represent a commitment on the part of B&B Electronics Mfg. Co. Inc.

B&B Electronics Mfg. Co. Inc. shall not be liable for incidental or consequential damages resulting from the

furnishing, performance, or use of this manual.

All Brand names used in this manual are the registered trademarks of their respective owners. The use of trademarks or other

designations in this publication is for reference purposes only and does not constitute an endorsement by the trademark holder

Table of Contents

1. Overview ............................................................................................................................................................1

Introduction.......................................................................................................................................................1

Features............................................................................................................................................................2

Packing List.......................................................................................................................................................2

2. Hardware Description .......................................................................................................................................3

Front Panel .......................................................................................................................................................3

Top View...........................................................................................................................................................4

Wiring the Power Inputs....................................................................................................................................4

Wiring the Fault Alarm Contact.........................................................................................................................5

LED Indicators ..................................................................................................................................................6

Ports..................................................................................................................................................................6

Cabling..............................................................................................................................................................8

3. Mounting Installation ......................................................................................................................................11

DIN-Rail Mounting...........................................................................................................................................11

Wall Mount Plate Mounting.............................................................................................................................13

4. Hardware Installation......................................................................................................................................14

Installation Steps.............................................................................................................................................14

5. Troubleshooting..............................................................................................................................................16

6. Technical Specification...................................................................................................................................17

iii Manual Documentation Number EIR405-T – 0109m

www.bb-elec.com

www.bb-europe.com

Overview

1 Manual Documentation Number EIR405-T – 0109m

www.bb-elec.com

www.bb-europe.com

Overview

Introduction

The EIR405-T is an industrial DIN mount, unmanaged 5 port Gigabit Ethernet switch.

High-Speed Transmissions

The EIR405-T includes a switch controller that can automatically sense transmission

speeds (10/100/1000 Mbps). The RJ-45 interface can also be auto-detected, so MDI or

MDI-X is automatically selected and a crossover cable is not required. All Ethernet ports

have memory buffers that support the store-and-forward mechanism. This assures that

data is properly transmitted

Dual Power Input

To reduce the risk of power failure, the EIR405-T provides two 12 to 48 VDC power

inputs. If the power fails, the switch will automatically switch to the secondary power

input. Also if the power goes out the corresponding P1 or P2 LED will go out and the

Fault LED will light. The contacts for the alarm output will also open.

Flexible Mounting

The EIR405-T can be DIN or Panel mounted. The compact design is suitable for

space-constrained environment such as a small cabinet.

Advanced Protection

The power line input on the EIR405-T supports up to 3,000 VDC EFT protection, which

secures the equipment against unregulated voltages and makes the system safer and more

reliable. The Ethernet ports support up to 6,000 VDC ESD protections which makes the

switch suitable for harsh environments.

Wide Operating Temperature

The operating temperature of the EIR405-T is -40 to 75oC. This wide range allows the

switch to be used in some of the harshest industrial environments that exist.

Overview

2 Manual Documentation Number EIR405-T – 0109m

www.bb-elec.com

www.bb-europe.com

Easy Troubleshooting

LED indicators make troubleshooting quick and easy. There are 2 LED’s for each port

that display the link status and transmission speed. Three LED’s P1, P2 and Fault help

you diagnose if power is present.

Features

•Provides 5 x 10/100/1000Base-T Mbps Ethernet ports.

•Supports full/half duplex flow control

•Supports auto-negotiation (10/100/1000)

•Supports MDI/MDI-X auto-crossover

•Supports Jumbo Frame of 9Kbytes

•Supports surge (EFT) protection 3,000 VDC for power input

•Supports 6,000 VDC Ethernet ESD protection

•Supports redundant 12 to 48 VDC power inputs

•Provides flexible mounting: DIN-rail or Panel Mounting

•Supports operating temperatures from -40 to 75oC

Packing List

•(1) EIR405-T, 5 Port Gigabit Industrial Ethernet Switch

•(1) Quick Start Guide

•(1) CD ROM with User Manual

•(2) Wall Mounting Bracket and Screws

Hardware Description

3 Manual Documentation Number EIR405-T – 0109m

www.bb-elec.com

www.bb-europe.com

Hardware Description

Front Panel

The Front Panel view of the EIR405-T is shown below.

Hardware Description

4 Manual Documentation Number EIR405-T – 0109m

www.bb-elec.com

www.bb-europe.com

Top View

The top panel view of the EIR405-T is equipped with one terminal block connector that

consists of two 12 to 48 VDC power inputs and the fault alarm output.

Wiring the Power Inputs

Follow the steps below to insert the power wires.

1. Insert the positive and negative wires into the V+ and V- contacts on the terminal block

connector.

2. Tighten the wire-clamp screws to prevent the wires from becoming loose.

Hardware Description

5 Manual Documentation Number EIR405-T – 0109m

www.bb-elec.com

www.bb-europe.com

Wiring the Fault Alarm Contact

The fault alarm contact is in the middle of terminal block connector as the picture shows

below. If one of the power sources fails a fault will be detected causing the circuit to open.

Note The wire gauge for the terminal block should be 12 to 24 AWG.

Insert the wires into the fault alarm contact (No. 3 & 4)

Hardware Description

6 Manual Documentation Number EIR405-T – 0109m

www.bb-elec.com

www.bb-europe.com

LED Indicators

Below is a table that explains the status of each the power and network status LED’s

found on the front panel of the EIR405-T.

LED Color Description

On Power input 1 is active

P1 Green

Off Power input 1 is inactive

On Power input 2 is active

P2 Green

Off Power input 2 is inactive

On Power input 1 or 2 is inactive

Fault Red

Off Power inputs 1 and 2 are both active, or no power is

present

On Connected to network

Flashing Networking is active

Ports 1 to 5

(Upper LED) Green

Off Not connected to network

On Connected to network at speed of 1000MbpsPorts 1 to 5

(Lower LED) Green Off Not connected to 1000Mbps network

Ports

RJ-45 ports: The RJ-45 ports auto-sense for 10, 100 or 1000 Mbps devices connections.

The auto MDI/MDIX feature allows connections to switches, workstation and other

equipment without changing straight through or crossover cabling. The charts below

show the cable pin assignments for straight through and crossover cables.

Hardware Description

7 Manual Documentation Number EIR405-T – 0109m

www.bb-elec.com

www.bb-europe.com

RJ-45 Pin Assignments

Pin Number Assignment

1 Tx+

2 Tx-

3 Rx+

6 Rx-

Note “+” and “-” signs represent the polarity of each wire pair.

All ports on the EIR405-T support automatic MDI/MDI-X operation, you can use

straight-through cables (See Figure below) for all network connections to PCs or servers,

or to other switches or hubs. In straight-through cables, pins 1, 2, 3, and 6, at one end of

the cable, are connected straight through to pins 1, 2, 3 and 6 at the other end of the cable.

The table below shows the 10BASE-T / 100BASE-TX MDI and MDI-X port pin outs.

Pin MDI-X Signal Name MDI Signal Name

1 Receive Data plus (RD+) Transmit Data plus (TD+)

2 Receive Data minus (RD-) Transmit Data minus (TD-)

3 Transmit Data plus (TD+) Receive Data plus (RD+)

6 Transmit Data minus (TD-) Receive Data minus (RD-)

Straight Through Cable Schematic

Tabla de contenidos

Otros manuales de Enrutador de red de Elinx

Elinx

Elinx EIRP305-24V-T Manual de usuario

Elinx

Elinx EIR410-2SFP-T Manual de usuario

Elinx

Elinx ESW726 Family Manual de usuario

Manuales populares de Enrutador de red de otras marcas

Allnet

Allnet ALL0333AU Manual de usuario

HomeSeer

HomeSeer HT-SEL Manual de usuario

Sercomm

Sercomm Genesis OC3505D Manual de usuario

Billion

Billion BIPAC 5102 Series Manual de usuario

TP-Link

TP-Link TD-8817 Manual de usuario

Motorola

Motorola MR1900 Manual de usuario

Digi

Digi IX14 Manual de usuario

Cisco

Cisco NCS 540 Manual

XAVi

XAVi X8821e Manual de usuario

BEC

BEC 6200WZL Manual de usuario

MikroTik

MikroTik hAP ac3 Series Manual de usuario

Korenix

Korenix JetNet 5428G Series Manual de usuario

NETGEAR

NETGEAR FS526T - Switch Manual de usuario

Korenix

Korenix JetNet 5710G Series Manual de usuario

Automated Logic

Automated Logic ZN551 Manual del propietario

Cisco

Cisco ASR 1000 Series Manual del operador

EnGenius

EnGenius ESR-9710 Manual de usuario

Cisco

Cisco 805 Series Instrucciones de funcionamiento y seguridad