http://www.elfinx.com 6
4.0 Motion Setup:
1. Camera: Click on a numbered button to define motion settings for a selected camera.
2. Target Zone: Define up to five detection zones per camera for triggering motion recording.
3. Individual Camera Motion Setting:
•Sensitivity: Adjust the sensitivity in the detection zone by using the scroll arrow.
•Alarm:
•Area Clear: Will clear all detection zones for a selected camera.
•Area Draw: Will draw a detection zone covering the whole area for a selected camera.
•Brightness / Hue / Contrast: Adjust the brightness, hue and contrast of each selected camera.
•Color:
•Default: Return to the default settings.
4. Recording Frame rate per Camera (sec): Each camera’s recording rate is adjustable.
Default: The default setting is as followed [4 chan – 30 fps / camera ~ 8 chan – 30 fps / camera ~ 16
chan – 8 fps / camera].
*If you increase the speed of a certain camera, the speed of the other cameras will be decreased with 8 & 16
chan.
5. Setup for all Cameras:
•Area Clear: Will clear all detection zones for all cameras.
•Area Draw: Will draw a detection zone covering the entire area for all cameras.
•Screen size: Set screen size from 160x120 to 320x240, and 640 to 480.
•Quality: Set screen quality from best, high, normal, low and lowest.
•Transfer Quality: Set the quality of the image transferred to either best, high, normal, low or lowest.
•Color of Motion Area: Select the color of motion detection area in the display mode between green or red.
•Full Screen When Motion: Select from multi to full screen when activity is detected.
•Set Quad Rotation Time:
