EGig EG2G24T Manual de usuario

24 Port 10/100Mbps plus 2 GigabitTX/FX

Auto-MDIX Modular Gigabit Ethernet Switch

User's Manual

III

24 Ports + 2 Ports Gigabit Ethernet Switch Auto MDIX

246810 12 14 16 18 20 22 24

135791113 15 17 19 21 23

RESET

POWER

135791113 15 17 19 21 23

246810 12 14 16 18 20 22 24

LINK / ACT

10 / 100M

FDX

LINK / ACT

10 / 100M

FDX

LINK/ACT

Fiber Optic Gigabit Ethernet

TX RX

1000BASE-T Gigabit Ethernet

100M

L.A.

FDX

AUTO MDIX

FCC Warning

This device has been tested and found to comply with limits for

a Class A digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in

a commercial environment. This equipment generates, uses

and radiates radio frequency energy and, if not installed and

used in accordance with the user's manual, may cause

interference in which case user will be required to correct the

interference at his own expense.

CE Mark Warning

This is a Class A product. In a domestic environment, this

product may cause radio interference in which case the user

may be required to take adequate measures.

Table Of Contents

Chapter 1 -------------------------------------------------------------------1

Introduction---------------------------------------------------------------------1

Key Features -------------------------------------------------------------------2

Chapter 2 -------------------------------------------------------------------3

Package Contents ------------------------------------------------------------3

Chapter 3 -------------------------------------------------------------------4

Front Panel Layout -----------------------------------------------------------4

24 RJ-45 10/100Mbps Switch Ports --------------------------------4

Uplink port----------------------------------------------------------------4

Reset----------------------------------------------------------------5

LED Definitions ----------------------------------------------------------6

Power LED --------------------------------------------------------------6

FDX LED -----------------------------------------------------------------6

10/100M LED -----------------------------------------------------------6

LINK/ACT LED ---------------------------------------------------------6

Gigabit Optional module series: -------------------------------------7

Gigabit 1000Base-T Gigabit Ethernet Module ------------------7

Gigabit 1000Base-SX Fiber Module(Multi-Mode) --------------8

Gigabit 1000Base-SX Fiber Module(Multi-Mode) --------------9

Gigabit 1000Base-LX Fiber Module(Single-Mode) ----------10

Gigabit 1000Base-LX Fiber Module(Single-Mode) ----------11

Rear Panel Layout ----------------------------------------------------------11

ACinput-------------------------------------------------------------------11

Chapter4------------------------------------------------------------------12

Rack Mounting ---------------------------------------------------------------12

Chapter5------------------------------------------------------------------13

Installation---------------------------------------------------------------------13

ToconnecttheSwitchtoPCs,servers,andother

network devices. -------------------------------------------------------13

To connect the Switch to a Switch or a Hub --------------------13

Chapter6------------------------------------------------------------------14

Technical Specifications ---------------------------------------------------14

Appendix------------------------------------------------------------------16

ANSI/TIA/EIA-568-A PLUG & Twisted-pair Cable -----------------16

EIA568A pin assignment:------------------------------------------------16

Recommend CAT5 UTP specifications ------------------------------16

RJ-45 Modular Phone Jack:---------------------------------------------17

II.

III.

IV.

II.

III.

IV.

Chapter 1

24 Port 10/100Mbps plus 2 Gigabit TX/FX Auto-MDIX

Modular switch

Introduction

The Switch provides 24 10/100Mbps ports. The Switch was designed

for easy installation and high performance in an environment where

traffic on the network and the number of user increase continuously.

The 19-inch standard rack-mount size was specifically designed for

ROBO (Remote Office & Branch Office) and medium to large

workgroups. The Switch can be installed where space is limited;

moreover it provides smooth network migration and easy upgrade to

network capacity.

-1-

III

24 Ports + 2 Ports Gigabit Ethernet Switch Auto MDIX

246810 12 14 16 18 20 22 24

135791113 15 17 19 21 23

RESET

POWER

135791113 15 17 19 21 23

246810 12 14 16 18 20 22 24

LINK / ACT

10 / 100M

FDX

LINK / ACT

10 / 100M

FDX

LINK/ACT

Fiber Optic Gigabit Ethernet

TX RX

1000BASE-T Gigabit Ethernet

100M

L.A.

FDX

AUTO MDIX

Key Features

Fully compliant with IEEE 802.3 10BASE-T

IEEE802.3u 100BASE-TX

IEEE802.3z 1000BASE-SX, 1000BASE-LX

IEEE802.3ab 1000BASE-TStandards

24 ports 10/100Mbps Fast Ethernet switch and 2 ports

Gigabit Ethernet optional slots, each allows for single-port

Gigabit Ethernet Switch module

1000BASE-SX or 1000BASE-LX or 1000BASE-T

Provided non-blocking and non-head-of-line-blocking full wire

speed forwarding

Built-in 16K MAC addresses

96Mbits dynamic packet buffer allocation for each port. - Total

8,000 Packet Capacity

Store-and-forward switch mode

Automatic learning of network configuration

Broadcast storm control

Flow control fully supported:

Half-duplex mode a Collision-based Congestion Control

Full duplex mode a 802.3x compliant Flow Control

Status LEDs:

Gigabits copper module:

100M, 1000M, Full Duplex, Link/Activity.

Gigabits fiber module:

Link/Activity.

10/100TX port:

Link/Act, Speed, Full Duplex/Collision.

System:

Power

All 100Base-TX or 1000Base-T (twisted pair) port support

Auto MDIX crossover capabilities

Provided front panel reset button

-2-

Chapter 2

Package Contents

Before you start to install the Switch, please verify your package that

contains the following items:

One Fast Ethernet Switch

Rack-mount Kit For Rack Installation

One Power Cord

One User's Manual

Option Gigabit Module

Note: If any of these items is found missing or damaged, please

contact your local supplier for replacement.

-3-

24 Port 10/100Mbps plus 2 GigabitTX/FX

Auto-MDIX Modular Gigabit Ethernet 

Switch Hub

User's Manual

24 Port Gigabit Switch

Power Cord

Rack-mount Kit

User's Manual

III

24 Ports + 2 Ports Gigabit Ethernet Switch Auto MDIX

246810 12 14 16 18 20 22 24

135791113 15 17 19 21 23

RESET

POWER

135791113 15 17 19 21 23

246810 12 14 16 18 20 22 24

LINK / ACT

10 / 100M

FDX

LINK / ACT

10 / 100M

FDX

III

24 Ports+ 2 Ports Gigabit Ethernet Switch Auto MDIX

246810 12 14 16 18 20 22 24

135791113 15 17 19 21 23

RESET

POWER

135791113 15 17 19 21 23

246810 12 14 16 18 20 22 24

LINK/ACT

10/100M

FDX

LINK/ACT

10/100M

FDX

LINK/ACT

FiberOptic Gigabit Ethernet

TX RX

1000BASE-TGigabit Ethernet

100M

L.A.

FDX

AUTOMDIX

1000BASE-T Gigabit Ethernet

AUTO MDIX

Fiber Optic Gigabit Ethernet

MT-RJ Gigabit Ethernet

Option Gigabit Module

Chapter 3

Front Panel Layout

I. 24 RJ-45 10/100Mbps Switch Ports

There are 24 RJ-45 connectors on the front panel for connecting to

servers, workstation or other devices. The Switch provides 24

10/100Mbps switching ports that could sense the 10/100M speed

and negotiate Full/Half-duplex mode automatically.

The Switch provided new Auto-MDIX technology. Besides, it can

auto detect the cable signal to make optimum connection. Please

make sure the CAT. 5, 5e or CAT. 6 twisted pair cable meet the

E/TIA568 standards. Please refer to the appendix at page 16 for

quickly trouble-shooting.

II. 2 Gigabit Optional module

The Switch provided 2Gigabit modular slots on the front panel for

connecting to servers or other gigabit switches. The Gigabit modules

have copper & fiber selection. The Gigabit modules only could

negotiate Full-duplex mode and do not need jumper or software to

configuration.

The copper supports Auto-MDIX and Auto-negotiation function. The

fiber supports multi-mode and single-mode at the SC or MT-RJ

connector. Please refer to the gigabit modular list at page 7, 8, 9, 10

and 11 for detail.

-4-

III. Reset

Allows the users refresh Automatic-learning of network configuration.

-5-

10 / 100M

FDX

10 / 100M

FDX

LINK / ACT

POWER

RESET

1 3 5 7 9 11 13 15 17 19 21 23

2 4 6 8 10 12 14 16 18 20 22 24

Yellow

Green

IV. LED Definitions

Power LED

On : The unit is powered on and ready for use.

Off : The unit is powered off.

FDX LED

On : The port is operating at Full-duplex.

Off : The port is operating at Half-duple without any

data being transmitted or received.

Flashing : Collisions occurred and the port is operating at

Half-duplex mode.

10/100M LED (on the 24 10/100TX port)

On : The port is on the 100Mbps status.

Off : The port is on the 10Mbps status.

LINK/ACT LED (on the 24 10/100TX port)

On : The port is ready for 10/100Mbps connection.

Flashing : The data is transmitted or received on the port.

100M LED (on the Gigabit module)

On : The port link & work on the 100Mbps.

LINK/ACT LED (on the Gigabit module)

On : The port is ready for 100/1000Mbps connection.

Flashing : The data is transmitted or received on the port.

1G LED (on the Gigabit module)

On : The port link & work on the 1000Mbps.

-6-

V. Gigabit Optional module series:

1000Base-T Gigabit Ethernet Module

Model Name Description

Compliant with IEEE802.3ab 1000Base-T Std.

1 x 1000Mbps STP port (RJ-45 connector).

Support Auto-MDIX & Auto-negotiation.

Supports Cat5, 5e or 6 twisted pair cable.

Jumper-less configuration.

Full duplex operation only.

LED-indicators for 1000M, 100M, Link/ACT, FDX.

-7-

MB-001T

1000BASE-T Gigabit Ethernet

AUTO MDIX

Tabla de contenidos

Otros manuales de Enrutador de red de EGig

EGig

EGig eG8TS Manual de usuario

EGig

EGig eG32T Manual de usuario

EGig

EGig eG5TS Manual de usuario

EGig

EGig eG16T Manual de usuario

EGig

EGig eG24T Manual de usuario

EGig

EGig XW305K Manual de usuario

EGig

EGig eG8T Manual de usuario

EGig

EGig eG4TR Manual de usuario

Manuales populares de Enrutador de red de otras marcas

Allnet

Allnet ALL0333AU Manual de usuario

HomeSeer

HomeSeer HT-SEL Manual de usuario

Sercomm

Sercomm Genesis OC3505D Manual de usuario

Billion

Billion BIPAC 5102 Series Manual de usuario

TP-Link

TP-Link TD-8817 Manual de usuario

Motorola

Motorola MR1900 Manual de usuario

Digi

Digi IX14 Manual de usuario

Cisco

Cisco NCS 540 Manual

XAVi

XAVi X8821e Manual de usuario

BEC

BEC 6200WZL Manual de usuario

MikroTik

MikroTik hAP ac3 Series Manual de usuario

Korenix

Korenix JetNet 5428G Series Manual de usuario

NETGEAR

NETGEAR FS526T - Switch Manual de usuario

Korenix

Korenix JetNet 5710G Series Manual de usuario

Automated Logic

Automated Logic ZN551 Manual del propietario

Cisco

Cisco ASR 1000 Series Manual del operador

EnGenius

EnGenius ESR-9710 Manual de usuario

Cisco

Cisco 805 Series Instrucciones de funcionamiento y seguridad

EGig eG2G24T Manual de usuario

Manuales populares de Enrutador de red de otras marcas