Edimax Pro AP 1 Guía de configuración

How to setup a roaming wireless network between Edimax Pro APs?

Topology

Before roaming, Please make sure that must be a overlap region between Edimax Pro 1 and

Edimax Pro AP 2.

As you can see as below, the smart phone is not able to roam from Edimax Pro AP 1 to

Edimax Pro AP 2. Because “Roaming”means the client detects multiple SSID at the same

time, and choose better wireless signal to connect with.

As above, there is no overlap region between Edimax Pro 1 and Edimax Pro 2. While client

walks to region A, it detects no signal, and it will just disconnection from the wireless

network. There would be no wireless roaming.

So if you would like to have good roaming experience, you need to make sure there is

overlap region between Edimax Pro AP 1 and Edimax Pro AP 2 as below.

Configuration Steps

1. Please connect laptop to the same network as Edimax Pro AP 1.

2. Please open web browser, type IP address of Edimax Pro AP 1 and press Enter.

3. The default username / password is admin / 1234

4. Click Wireless Settings >> 2.4GHZ >> Basic , configure as below, and click Apply.

a. Please enter SSID.

b. Please change Auto Channel to Disable.

c. Please select channel which is less used in the environment.

d. Please select a channel width. If there the interference is too much, then we prefer to select 20

MHz.

5. Click Security, configure as below, and click Apply.

a. For example, configured Authentication Method as WAP-PSK, and Pre-Shared Key as 1234567890.

b. Please “Enable” smart handover.

c. Please configure RSSI Threshold depending on your demand. If the smart phone signal is reduced to

-80 dBm, Edimax Pro AP will disassociate it from smart phone. In this period of time, the smart phone

will detect and re-connect to the SSID which has the stronger signal. Please note, it might be short time

that smart phone will lose the wireless connection due to how fast smart phone detects and connects

to new SSID.

6. Please connect laptop to the same network as Edimax Pro AP 2.

7. Under Edimax pro AP2, please follow the same configurations of Edimax Pro AP1 settings (step1 - 5)

that we mentioned above.

8. Once the configuration is completed. Then while user walks from Edimax Pro 1 to Edimax Pro 2, the

smart phone should auto roam from Edimax AP 1 to Edimax Pro AP 2 successfully.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Punto de acceso inalámbrico de Edimax

Edimax

Edimax EW-7228APn Manual de usuario

Edimax

Edimax HP-8501APg Manual de usuario

Edimax

Edimax SC1000 Manual de usuario

Edimax

Edimax EW-7303HPn V2 Manual de instrucciones

Edimax

Edimax OAP1300 Manual de usuario

Edimax

Edimax BR-6208AC Manual de usuario

Edimax

Edimax EW-7203APg Manual de usuario

Edimax

Edimax EW-7416APn v2 Manual de usuario

Edimax

Edimax EW-7228APn Manual de usuario

Edimax

Edimax CAP1300 Manual de usuario

Edimax

Edimax CV-7438nDM N600 Manual de usuario

Edimax

Edimax EW-7228APn Manual de usuario

Edimax

Edimax CV-7438nDM Manual de usuario

Edimax

Edimax CAX1800 Manual de usuario

Edimax

Edimax EW-7203APg Manual de usuario

Edimax

Edimax EW-7416APn Manual de usuario

Edimax

Edimax CV-7428nS Manual de usuario

Edimax

Edimax EW-7428HCn Manual de usuario

Edimax

Edimax EW-7303HPn V2 Manual de usuario

Edimax

Edimax CV-7438nDM Manual de usuario

Edimax

Edimax EW-7416APn v2 Manual de usuario

Edimax

Edimax EW-7479CAP Manual de usuario

Edimax

Edimax EW-7416APn v2 Manual de usuario

Edimax

Edimax EW-7288APC Manual de usuario

Manuales populares de Punto de acceso inalámbrico de otras marcas

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Manual de usuario

Ubiquiti

Ubiquiti NanoStation NSM2 Manual de usuario

Cisco

Cisco Aironet 1550 Series Manual de usuario

Aruba

Aruba IAP-335 Manual de usuario

Advantek Networks

Advantek Networks AWN-AP-54MR Manual de usuario

IP-COM

IP-COM AP355 Manual de usuario

Buffalo

Buffalo AirStation WLA-L11G Manual de usuario

EnGenius

EnGenius EnStationACv2 Manual de usuario

D-Link

D-Link DAP-3662 Manual de usuario

xG Technology

xG Technology xMax CN1300 Manual de usuario

Widelink

Widelink ezWave WAP-1100 Series Manual de usuario

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Manual de usuario

Aruba

Aruba AP-203R Manual de usuario

LuXout Shades

LuXout Shades LUXSHADE MOTION Manual de usuario

CreatComm

CreatComm TB5F Manual de usuario

SineDigital

SineDigital MW-1500AP(H) Manual de usuario

TP-Link

TP-Link AP9650 V1 Manual de usuario

Draytek

Draytek VIGORAP 902 Manual de usuario