Edimax SP-1101W Manual de usuario
1
SP-1101W /SP-2101W
Quick Installation Guide
05-2014 / v1.0
1
I. Product Information
I-1. Package Contents
I-2. Front Panel
Switch Status Button & LED
Reset Button
Power LED
Network LED
Smart Plug Switch
Quick Installation Guide
CD with Quick
Installation Guide
2
I-3. LED Status
After setup, the network LED must display on and green in order
for the EdiPlug app to function remotely i.e. from a different
Internet connection to your smart plug.
I-4. Switch Status Button
The switch status button, located on the front of your smart plug (see I-2.),
switches on/off your smart plug’s output power socket. You can switch any
device connected to your smart plug on or off with this button. The button
will light up green to indicate on (see I-3).
LED
Color
Status
Description
Switch
Status
Green
On
Smart plug output power socket is on.
Off
Smart plug output power socket is
off.
Power
Green
On
Smart plug is powered on.
Off
Smart plug is off.
Network
Red
Quick Flashing
Smart plug is starting up or restarting.
Slow Flashing (1
x per second)
Smart plug is in installation mode and
ready for setup.
Green
On
Smart plug is connected to wireless
network and cloud.
Slow Flashing (1
x per second)
Smart plug is connected to wireless
network but not cloud.
Orange
Flashing
Alert: Budget/power quota exceeded.
Off
No network connection.
3
I-5. Product Label
The product label, which is located on the back of the smart plug switch,
displays the input/output power and the default password of your smart plug.
The password should be changed when you have finished the installation
process for security purposes. The password is required to access the smart
plug switch remotely.
I-6. Reset
If you experience problems with your smart plug,
you can reset the plug back to its factory default
settings. This resets all settings, including the
smart plug’s password, back to default.
1. Press and hold the reset button found on the
front of the plug for at least 10 seconds
2. Release the button when the network LED is
flashing quickly red.
3. Wait for the smart plug to restart. The plug is
ready when the network LED is flashing slowly
red to indicate installation mode.
4
II. Hardware Installation
Follow the instructions below to ensure your smart plug is properly connected
and ready for setup.
If you have multiple smart plugs to set up, please only plug in and
set up one smart plug at a time.
1. Plug the smart plug into a power socket.
2. Wait a few moments for the smart plug to start up. The smart plug is ready
for setup when the network LED is flashing slowly red to indicate
installation mode.
If your smart plug’s network LED does not indicate installation
mode, try resetting the smart plug (see I-6).
3. When you see the smart plug’s network LED indicate installation mode,
please continue to III. Smart Plug Setup to set up your smart plug using
the free EdiPlug smartphone app.
5
III. Smart Plug Setup
To set up your smart plug with the free EdiPlug smartphone app, please
download the EdiPlug app and then follow the setup instructions for iOS or
Android. After setup, you can use the EdiPlug app to switch your smart plug
switch on/off remotely from any smartphone with an Internet connection, as
well as set up automated schedule and email notifications.
1. Search the Apple App Store or Google Play for “EdiPlug”.
2. Download and install the app.
3. Follow the appropriate instructions below for iOS or Android.
6
III-1. iOS
Follow the instructions below to add a new smart plug to the EdiPlug app on
iOS:
You must be within Wi-Fi range of the smart plug. If you have
multiple smart plugs, please only plug in and set up one plug at a
time.
1. Search for a Wi-Fi network named “EdiPlug.Setup” and connect to it, as
shown below:
2. Open the EdiPlug app and select your Wi-Fi network from the list, as
shown below:
7
3. Enter your Wi-Fi password and tap “OK”, then wait a moment for your plug
to restart.
4. The next screen will indicate that setup is complete. Your smart plug will
now be displayed on the EdiPlug main screen. Tap the switch to switch your
smart plug (and any electrical device you plug into it) on or off.
5. The smart plug’s network LED should display on and green to indicate a
successful network and cloud connection. You can use the EdiPlug app to
control your smart plug remotely from any Internet connection.
8
III-1-1. Change Smart Plug Name & Password
1. Select “Edit” from the EdiPlug main screen and then select the smart plug
which you wish to edit from the list.
2. Enter a new name and password for your smart plug and then tap “Back”
to go back to the main screen. Your smart plug will now be displayed under
its new name.
Features such as scheduling, budget control and email
notifications can also be set up in the “Plug Settings” menu.
9
III-1-2. Add an Existing Smart Plug to the Main Screen
1. From the EdiPlug main screen, click the “+” icon in the top-right corner and
select a plug from the list.
2. Enter your smart plug’s password and tap “OK”. Click the check icon by
your smart plug’s name on the next screen to finish.
The default password is 1234.
Otros manuales para SP-1101W
3
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Cambiar de Edimax
Edimax
Edimax EK-PAK2 Manual de usuario
Edimax
Edimax GS-3008P Manual de usuario
Edimax
Edimax GS-5424PLC Manual de usuario
Edimax
Edimax EK-2U2C Manual de usuario
Edimax
Edimax ES-3308P Manual de usuario
Edimax
Edimax Two-console 16 port PS/2 KVM Switch Manual de usuario
Edimax
Edimax EK-2U2CA Manual de usuario
Edimax
Edimax ES-5816PHG Manual de usuario
Edimax
Edimax EK-PS2C Guía de referencia
Edimax
Edimax ES-3208P Manual de usuario
Edimax
Edimax ES-5500M V2 Manual de usuario
Edimax
Edimax ES-1016 Manual de usuario
Edimax
Edimax EU-HB4S Manual de usuario
Edimax
Edimax EU-HB4M Manual de usuario
Edimax
Edimax ES-5844P Manual de usuario
Edimax
Edimax ES-5500P Manual de usuario
Edimax
Edimax ES-1008PH Manual de usuario
Edimax
Edimax EK-UA2C Manual de usuario
Edimax
Edimax ES-5160G+ Manual de usuario
Edimax
Edimax ES-1008PL Manual de usuario
