EDIFIER W210BT Manual de usuario
EN 1. Power ON/OFF
2. Pairing
3. Reset
4. Controls
Wireless Neckband Headphones
W210BT
Manual
1. When they’re power o, press and hold the power button for 5s.
Green and red LED will blink rapidly.
2. Select "EDIFIER W210BT" in your device setting to connect.
1. The headphones are power on and disconnected from all devices.
2. Press and hold the " " and "v" at the same time for 5s.
3. The status light blinks green until reset is completed.
4. Once the headphones are reset, they enter pairing mode
automatically.
1st Pairing
1. Once the headphones are power on, they will enter Bluetooth
pairing automatically. Green and red LED will blink rapidly.
2. Select "EDIFIER W210BT" in your device setting to connect.
Note:
For subsequent use, the headphones will auto-connect to device
used last time.
5s
5s
Note:
1. : Press and hold
2. Images are for illustrative purposes only and may dier from the
actual product.
For more information, please visit our website:
www.edier.com
@Edier_Global @Edier_Global@Edierglobal
Model: EDF200104
Edier International Limited
P.O. Box 6264
General Post Oce
Hong Kong
www.edier.com
2023 Edier International Limited. All rights reseed.
Printed in China
NOTICE:
For the need of technical improvement and system upgrade,
information contained herein may be subject to change from time
to time without prior notice.
Products of EDIFIER will be customized for dierent applications.
Pictures and illustrations shown on this manual may be slightly
dierent from actual product. If any dierence is found, the actual
product prevails.
Press and hold the power button for 3s.
3s
Indicator
3s 5s
x1x3
x1 x1
x2x2
x1
x1
EN 1. Power ON/OFF
2. Pairing
3. Reset
4. Controls
Wireless Neckband Headphones
W210BT
Manual
1. When they’re power o, press and hold the power button for 5s.
Green and red LED will blink rapidly.
2. Select "EDIFIER W210BT" in your device setting to connect.
1. The headphones are power on and disconnected from all devices.
2. Press and hold the " " and "v" at the same time for 5s.
3. The status light blinks green until reset is completed.
4. Once the headphones are reset, they enter pairing mode
automatically.
1st Pairing
1. Once the headphones are power on, they will enter Bluetooth
pairing automatically. Green and red LED will blink rapidly.
2. Select "EDIFIER W210BT" in your device setting to connect.
Note:
For subsequent use, the headphones will auto-connect to device
used last time.
5s
5s
Note:
1. : Press and hold
2. Images are for illustrative purposes only and may dier from the
actual product.
For more information, please visit our website:
www.edier.com
@Edier_Global @Edier_Global@Edierglobal
Model: EDF200104
Edier International Limited
P.O. Box 6264
General Post Oce
Hong Kong
www.edier.com
2023 Edier International Limited. All rights reseed.
Printed in China
NOTICE:
For the need of technical improvement and system upgrade,
information contained herein may be subject to change from time
to time without prior notice.
Products of EDIFIER will be customized for dierent applications.
Pictures and illustrations shown on this manual may be slightly
dierent from actual product. If any dierence is found, the actual
product prevails.
Press and hold the power button for 3s.
3s
Indicator
3s 5s
x1x3
x1 x1
x2x2
x1
x1
EN 1. Power ON/OFF
2. Pairing
3. Reset
4. Controls
Wireless Neckband Headphones
W210BT
Manual
1. When they’re power o, press and hold the power button for 5s.
Green and red LED will blink rapidly.
2. Select "EDIFIER W210BT" in your device setting to connect.
1. The headphones are power on and disconnected from all devices.
2. Press and hold the " " and "v" at the same time for 5s.
3. The status light blinks green until reset is completed.
4. Once the headphones are reset, they enter pairing mode
automatically.
1st Pairing
1. Once the headphones are power on, they will enter Bluetooth
pairing automatically. Green and red LED will blink rapidly.
2. Select "EDIFIER W210BT" in your device setting to connect.
Note:
For subsequent use, the headphones will auto-connect to device
used last time.
5s
5s
Note:
1. : Press and hold
2. Images are for illustrative purposes only and may dier from the
actual product.
For more information, please visit our website:
www.edier.com
@Edier_Global @Edier_Global@Edierglobal
Model: EDF200104
Edier International Limited
P.O. Box 6264
General Post Oce
Hong Kong
www.edier.com
2023 Edier International Limited. All rights reseed.
Printed in China
NOTICE:
For the need of technical improvement and system upgrade,
information contained herein may be subject to change from time
to time without prior notice.
Products of EDIFIER will be customized for dierent applications.
Pictures and illustrations shown on this manual may be slightly
dierent from actual product. If any dierence is found, the actual
product prevails.
Press and hold the power button for 3s.
3s
Indicator
3s 5s
x1x3
x1 x1
x2x2
x1
x1
EN 1. Power ON/OFF
2. Pairing
3. Reset
4. Controls
Wireless Neckband Headphones
W210BT
Manual
1. When they’re power o, press and hold the power button for 5s.
Green and red LED will blink rapidly.
2. Select "EDIFIER W210BT" in your device setting to connect.
1. The headphones are power on and disconnected from all devices.
2. Press and hold the " " and "v" at the same time for 5s.
3. The status light blinks green until reset is completed.
4. Once the headphones are reset, they enter pairing mode
automatically.
1st Pairing
1. Once the headphones are power on, they will enter Bluetooth
pairing automatically. Green and red LED will blink rapidly.
2. Select "EDIFIER W210BT" in your device setting to connect.
Note:
For subsequent use, the headphones will auto-connect to device
used last time.
5s
5s
Note:
1. : Press and hold
2. Images are for illustrative purposes only and may dier from the
actual product.
For more information, please visit our website:
www.edier.com
@Edier_Global @Edier_Global@Edierglobal
Model: EDF200104
Edier International Limited
P.O. Box 6264
General Post Oce
Hong Kong
www.edier.com
2023 Edier International Limited. All rights reseed.
Printed in China
NOTICE:
For the need of technical improvement and system upgrade,
information contained herein may be subject to change from time
to time without prior notice.
Products of EDIFIER will be customized for dierent applications.
Pictures and illustrations shown on this manual may be slightly
dierent from actual product. If any dierence is found, the actual
product prevails.
Press and hold the power button for 3s.
3s
Indicator
3s 5s
x1x3
x1 x1
x2x2
x1
x1
EN 1. Power ON/OFF
2. Pairing
3. Reset
4. Controls
Wireless Neckband Headphones
W210BT
Manual
1. When they’re power o, press and hold the power button for 5s.
Green and red LED will blink rapidly.
2. Select "EDIFIER W210BT" in your device setting to connect.
1. The headphones are power on and disconnected from all devices.
2. Press and hold the " " and "v" at the same time for 5s.
3. The status light blinks green until reset is completed.
4. Once the headphones are reset, they enter pairing mode
automatically.
1st Pairing
1. Once the headphones are power on, they will enter Bluetooth
pairing automatically. Green and red LED will blink rapidly.
2. Select "EDIFIER W210BT" in your device setting to connect.
Note:
For subsequent use, the headphones will auto-connect to device
used last time.
5s
5s
Note:
1. : Press and hold
2. Images are for illustrative purposes only and may dier from the
actual product.
For more information, please visit our website:
www.edier.com
@Edier_Global @Edier_Global@Edierglobal
Model: EDF200104
Edier International Limited
P.O. Box 6264
General Post Oce
Hong Kong
www.edier.com
2023 Edier International Limited. All rights reseed.
Printed in China
NOTICE:
For the need of technical improvement and system upgrade,
information contained herein may be subject to change from time
to time without prior notice.
Products of EDIFIER will be customized for dierent applications.
Pictures and illustrations shown on this manual may be slightly
dierent from actual product. If any dierence is found, the actual
product prevails.
Press and hold the power button for 3s.
3s
Indicator
3s 5s
x1x3
x1 x1
x2x2
x1
x1
Otros manuales para W210BT
1
Tabla de contenidos
Otros manuales de Auriculares de EDIFIER
EDIFIER
EDIFIER TWS200 Plus Manual de usuario
EDIFIER
EDIFIER TWS5 Manual de usuario
EDIFIER
EDIFIER W820BT Manual de usuario
EDIFIER
EDIFIER W860NB Manual de usuario
EDIFIER
EDIFIER Xemal X3 Manual de usuario
EDIFIER
EDIFIER TWS1 Pro Manual de usuario
EDIFIER
EDIFIER HECATE EDF700006 Manual de usuario
EDIFIER
EDIFIER W830BT Manual de usuario
EDIFIER
EDIFIER W200T mini Manual de usuario
EDIFIER
EDIFIER P180 Plus Manual de usuario
EDIFIER
EDIFIER TWS200 Manual de usuario
EDIFIER
EDIFIER Xemal X3s Manual de usuario
EDIFIER
EDIFIER Xemal X6 Manual de usuario
EDIFIER
EDIFIER Xemal X5 Guía de instalación
EDIFIER
EDIFIER W830BT Manual de usuario
EDIFIER
EDIFIER W210BT Manual de usuario
EDIFIER
EDIFIER TWS200 Pro Manual de usuario
EDIFIER
EDIFIER X2s Manual de usuario
EDIFIER
EDIFIER TWS330 NB Manual de usuario
EDIFIER
EDIFIER W100T Manual de usuario
