EDIFIER Uni-Buds Manual de usuario
True Wireless Stereo Earbuds
Uni-Buds
www.edif
ier.com
Tap zone
Ear wings
Packing lists:
charging case *1 ear wings *4 ear tips *3 storage bag *1
Type-C charging cable *1
Note:
•
There are dierent size of ear tips and ear wings attached in the package,
please select the suitable ones to wear.
•
Images are for illustrative purposes only and may dier from the actual
product.
EN · Product Description and Accessories
■ User guide
Press: battery display
● Charge the earbuds
•
Place the earbuds in the charging case, it will auto-charge the earbuds when
the case is closed.
● Charge the charging case
•
Connect the charging case to power source with the included Type-C
charging cable for charging.
Rated input: 5V 60mA (earbuds)
5V 500mA (charging case)
● Power display
•
When the charging case closed, press the button to check the battery level
on the case;
•
When the charging case opened, press the button to check the battery level
of the case and earbuds;
•
Low battery display: when the charging case opened, the low battery icon
ashes automatically for around 3 seconds and then turns o.
● Power on
•
When in the charging case, power on automatically while the case is opened.
● Low battery display
•
When the charging case has only 10% remaining power, it will enable the
low battery protection function. The button will not work at this time, and
the charging case can power on/o only.
● Power o
• When placed in the charging case, power off automatically while the case is
closed.
■ Bluetooth connection
● Connection of earbuds and mobile phone
•
Place the earbuds in the charging case, press and hold the button on the
case for around 3 seconds to enter Bluetooth pairing, the Bluetooth icon on
the screen ashes.
•Set mobile phone to search and connect to the Bluetooth name, take out the
earbuds after pairing is successful.
● TWS pairing of the left and right earbuds
•
When TWS pairing is not connected, place the earbuds in the charging case,
press and hold the button on the case for approx. 6 seconds to enter TWS
pairing, the left and right ear icons on the display screen ash alternately.
Note: This function will not work when TWS pairing is done.
● Restore to factory settings
•
Place the earbuds in the charging case, press and hold the button on the
case for approx. 10 seconds to restore to factory settings.
Note: Restoring the factory settings will clear the pairing records between
earbuds and the mobile phone, and it will also restore the settings in the
APP to the factory settings.
Press: battery display
Press and hold for 3
seconds: Bluetooth pairing
Press and hold for 6 seconds:
TWS pairing
Press and hold for 10 seconds:
Restore to factory settings
Display
screen
■ Icons description
Note: To avoid misoperation, the button will only respond when the charging
case is opened.
Close the case Place the earbuds
in the case
Open the case
Battery display of
charging case Low battery prompt
of charging case
Battery display of
the earbuds
Bluetooth pairing
TWS pairing Pairing successful Pairing failed Clear pairing records
LR
Rated input: 5V 60mA (earbuds) 5V 500mA (charging case)
■ Functional operation instructions
● Call
Accept/end a call:
double click the right earbud
Accept/end a call:
double click the left earbud
● Music playback
Pause/play:
double click the right earbud
Next track:
triple click the right earbud
Voice assistant:
double click the left earbud
Previous track:
triple click the left earbud
When charging the charging case, the battery icon does not display
•
Please ensure the charging case is correctly connected with power source.
•
If the earbuds are not used for a long time, the battery will not respond at
once. At this time, recharge for about 30 minutes to back to the charging
state.
No sound
•
Check if the earbuds are operating.
•
Check if the earbuds volume are at an appropriate level.
•
Check if the earbuds are correctly connected with mobile phone.
•
Check if the earbuds are operating within a normal working range.
The call quality of the earbuds are not good.
•
Check if mobile phone is in an area with strong signal.
•
Please ensure the earbuds are within eective distance (10m) and no
obstacle between the earbuds and mobile phone.
When playing music, cannot control pause/play/previous/next track
via the earbuds.
•
Please ensure the paired device support AVRCP (Audio/Video Remote Control
Prole) prole.
Tap sensitivity is not good
•
Please make sure to touch in the eective tap zone of the earbuds and the
intensity/angle is moderate; if the tap sensitivity setting of this earbuds does
not meet your usage habits, you can adjust it to suit your tap sensitivity in
EDIFIER CONNECT.
■ FAQs
• Keep the product away from humid places to avoid affecting internal
circuit.
• Do not put the product in places exposed to sun or with high
temperature. High temperature will shorten service life of electronic
components, damage battery and make plastic components deformed.
• Do not put the product in cold places to avoid damaging internal circuit
board.
• Do not dismantle the product. Non-professional personnel may damage
the product.
• Do not drop, strongly vibrate, strike the product with hard object to
avoid damaging internal circuit.
• Do not use drastic chemicals or cleaner to clean the product.
• Do not use sharp objects to scratch product surface to avoid damaging
shell and aecting facade.
■ Maintenance
After one earbud is connected to another device, the other earbud has
no sound when used again
•
When connected one earbud to another device separately, the pairing records
of the left and right earbuds may be lost. To back to the two earbuds mode,
press and hold the button of the charging case for 6 seconds to reconnect
the left and right earbuds.
Edifier International Limited
P.O. Box 6264
General Post Oice
Hong Kong
www.edifier.com
2020 Edifier International Limited. All rights reserved.
Printed in China
NOTICE:
For the need of technical improvement and system upgrade,
information contained herein may be subject to change from time
to time without prior notice.
Products of EDIFIER will be customized for dierent applications.
Pictures and illustrations shown on this manual may be slightly
dierent from actual product. Images are for illustrative purposes
only and may dier from the actual product.
Otros manuales para Uni-Buds
1
Tabla de contenidos
Otros manuales de Auriculares de EDIFIER
EDIFIER
EDIFIER Xemal X3s Manual de usuario
EDIFIER
EDIFIER TWS2 Manual de usuario
EDIFIER
EDIFIER W820NB Plus Manual de usuario
EDIFIER
EDIFIER W830BT Manual de usuario
EDIFIER
EDIFIER W806BT Manual de usuario
EDIFIER
EDIFIER W820BT Manual de usuario
EDIFIER
EDIFIER TWS5 Manual de usuario
EDIFIER
EDIFIER W200BT Manual de usuario
EDIFIER
EDIFIER TWS NB2 Pro Manual de usuario
EDIFIER
EDIFIER TWS NB5 Manual de usuario
EDIFIER
EDIFIER TWS330 NB Manual de usuario
EDIFIER
EDIFIER TWS200 Manual de usuario
EDIFIER
EDIFIER TWS6 Manual de usuario
EDIFIER
EDIFIER Uni-Buds Manual de usuario
EDIFIER
EDIFIER Xemal X5 Manual de usuario
EDIFIER
EDIFIER TO-U2 mini Manual de usuario
EDIFIER
EDIFIER TWS1 Manual de usuario
EDIFIER
EDIFIER Xemal X3s Manual de usuario
EDIFIER
EDIFIER X2s Manual de usuario
EDIFIER
EDIFIER TO-U6+ Manual de usuario
