Edge Products Juice Attitude CTS2 Manual de usuario
4 Read Me
4 Safety Warning & Caution
5 Safety Guidelines
6 At a Glance
6 Physical Overview - The Display
7 Accessories
8 Touch Screen Gestures
9 Menu Icons
9 Common Terms
10 Getting Started
10 Download the Fusion Update Software
11 Using the Fusion Update Software
12 Cable Installation
12 Windshield Mount Installation
13 Installing the Display
14 Display Set Up
14 OEM Selection Menu
15 Entering the Quick Link Menu
16 Entering the Pull Down Menu
17 Changing the Default Background Image
18 ConguringtheHomeScreens
20 Individual Gauge Setup
21 Calibrating Pitch, Roll, & G-Force Gauges
22 Download and Install MyStyle Software
23 Adding Custom Background Images
24 Settings
24 Accessory Options
26 Vehicle Options - Tire Size
27 Alert Options
28 Sound Duration - Alerts
28 Backlight Auto dim
29 Menu Time out
29 Units
29 Factory Reset
30 Juice Control
30 InstallingtheJuiceHardware
30 Adjusting Power Levels
31 Power levels Explained
32 Adjusting the Juice Control Settings
33 Backdown Settings
34 Low Boost Response
34 Torque Management
35 Transmission Setup
36 Defuel WOT Shifts
36 Timing Options
36 Truck Model Year
37 Speed Limiter
37 Axle Ratio
Table of Contents
38 Performance Tuning
38 Trans Only Tuning
40 Custom Options Explained
42 Diagnostics
42 Read DTCs
43 Clear DTCs
43 Clear On Start
44 Manual DPF Regeneration
45 DPF Regeneration Explained
46 Injector Balance Rates
47 Transmission Relearn
48 Performance Testing
48 0-60 & Quarter Mile
49 Horsepower
50 Data Log
50 Data Logging Explained
51 Retrieving Data Using MyStyle
52 Records
52 Records Explained
53 Help
53 HelpMenuExplained
54 Maintenance Manager
54 Turn on Maintenance Manager
55 Entering the Odometer Value
56 Setting the Alert Threshold
57 Customizing Maintenance Items
58 Mileage Coach
58 Mileage Coach Set Up
60 Appendix
60 Limited 1 Year Warranty
61 Important Information about your Vehicle’s Warranty
62 Service Center and Compatibility Cautions
62 MechanicalModications
63 Forced Induction (Turbochargers or Superchargers)
64 Commonly Used Acronyms
65 Trouble Shooting Guide
66 OEM EGT Locations - Diesel Trucks Only
67 CARB/EPA Compliance
4
Safety Warning & Caution
Read Me
Throughout this User Manual you will see important messages
regarding your safety or the protection of your vehicle. These
messages are designated by the words WARNING or CAUTION.
WARNING indicates a condition that may cause serious
injury or death to you, your passengers or others nearby.
Pay careful attention to these Warning messages, and always
comply with them. They could save a life.
CAUTION indicates a condition that could cause damage to
your vehicle. It is important to install and operate your
product in conformance with instructions in this Manual.
Caution alerts you to particularly important things that will
keep your vehicle operating properly.
The Edge Product you have purchased is a high-performance
product. As such, it does present some risks of which you should
be fully aware. Do not use this product until you have carefully
read the following safety information and the Owner Agreement.
NOTE: After the display has been
installed, a warning screen will appear (3) different times. If
you agree with the agreement, press the [YES] button to
continue.
Read Me
5
Safety Guidelines
1. Do not exceed legal speed limits on public roadways. Use any
enhanced speed capabilities of this product only in closed circuit,
legally sanctioned racing environments expressly for this purpose.
Loss of control from speeding on a public road could seriously
injure you, your passengers, or others on the roadway.
2. Do not operate the device while driving. Perform all adjust-
ments or changes while stopped. Changing a setting while under
way can interfere with your attention to roadway conditions.
3. “Stacking” performance-enhancing devices or other improper
installation can cause power train failure on the road. Other prod-
ucts may have features incompatible with your Edge device. Fol-
low all installation and operating instructions, and do not stack
products.
4.Somemodicationsmayaffectotherpartsofyourvehicle.For
example, if you remove/adjust the speed limiter in your vehicle, be
sure your tires and other components are rated for the increased
speeds they will have to withstand. Not doing so can lead to loss
of vehicle control. Modify the speed limiter only for use in closed
circuit, legally sanctioned racing environments, not for use on pub-
lic roadways.
WARNING - Misapplication or misuse of this product
could lead to a serious or fatal accident. Comply with all
safety information in this manual, and your vehicle owner’s
manual. Follow safety, installation and operating instruc-
tions in this User Manual to assure proper use.
Read Me
6
At a Glance
Ambient
Light
Sensor
Drop-down
Menu
Quick Link
Menu
Gauges
Physical Overview - The Display
HDMI
Port
Video
In
Mount
Receiver
USB port
At a Glance
7
Accessories
Windshield Mount
OBDII to HDMI cable
OBDII
EAS
HDMI
Suction
Cup
Cam
Lever
Dual-Tab
Mount
Mini USB Cable
Zip-Ties
Alcohol Wipe
Iso-
propyl
Adjustment
Nut
At a Glance
8
Touch Screen Gestures
Press Hold&Drag
Use these gestures to navigate and control the display.
TheHold&Draggesture
is used to drag up or down
menus, and scroll through
menu items.
The Press gesture is used
to select options, input
values, enter menus, etc.
Swipe
The Swipe gesture is used to
scroll through gauge screens.
At a Glance
9
Menu Icons
Icon What it does
Brings you back to the home screen
Changes the background Image
Opens the custom color picking menu
Home
Background
Custom Color
Brings you back to the previous screen or menuBack
Opens the default color picking menuDefault Color
At a Glance
Common Terms
PID - Parameter IDs
Term What it is
Data taken from a vehicle & viewed in a gauge
DPF - Diesel Particulate Filter Requiredonnewdieselstolteroutsoot
EAS - Expandable Accessory
System
Allows you to connect aftermarket sensors and
other devices such as turbo timers
ECM - Engine Control
Module
(aka ECU) A computer that controls various
sensors and engine components
TCM - Transmission Control
Module
(aka TCU) A computer that controls automatic
transmissions
PCM - Power Control
Module
(aka PCU) Combines and provides power for
the ECM and TCM
10
Download the Fusion Update Software
Getting Started
A computer with internet access is required:
STEP 1 - Go to www.edgeproducts.com
STEP 2 - Click the UPDATES tab, then DOWNLOAD.
STEP 3 - Open the FusionClientSetup.exele,thenclickRun.
STEP 4 - Click Next to begin.
STEP 5 - Choose a folder location, then click Next to continue.
STEP 6 - Click Nexttoconrmtheinstallation.
STEP 7 - Click the OK button if during the installation, the following
message appears:
“These drivers are not Windows Logo or WHQL veried. If you are
asked, please choose to install them anyway.”
STEP 8 - Click Close to exit once the installation is complete.
STEP 9 - Double click the Fusion Icon on your desktop.
STEP 10 - Click on the Create a New User option.
STEP 11 - Fill in the required information and click Save.
An e-mail containing your fusion password will be sent to the e-mail you
used in the form. Use this password to login into Fusion. (NOTE: The
password is case sensitive)
STEP 12 - Double click the Fusion Icon on your desktop.
STEP 13 - Plug the display into the computer using the USB cable.
STEP 14 - If asked, choose “Yes, this time only”, then click Next.
STEP 15 - Select Install the software automatically then Next.
STEP 16 - If you’re asked to “Continue Anyway” or “STOP instal-
lation” click Continue Anyway then click Next to complete the
hardware wizard.
Getting Started
Tabla de contenidos
Otros manuales de Electrónica del automóvil de Edge Products
