Eden Terra Nova TN226 Manual de usuario

Quick-start Guide

Terra Nova Amplifiers and Combos

Quick Start Guide - Guide de démarrage - Kurzanleitung - Manual De Usuario - Guida Rapida - クイックスタート・ガイド - 快速入门

Amplificateurs et combos basse Terra Nova - Terra Nova Bass Topteile und Combos - Amplificadores Y Combos De Bajo “Terra Nova”

Amplificatori e Combo per Basso Terra Nova - ベースアンプヘッド＆コンボ

4013.020

Quick Start Guide | Terra Nova Amplifiers & Combos

important safety information

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any ventilation openings. Install in

accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators,

heat registers, stoves, or other apparatus (including

amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or

grounding- type plug. A polarized plug has two blades

with one wider than the other. A grounding type plug

has two blades and a third grounding prong. The wide

blade or the third prong are provided for your safety. If

the provided plug does not fit into your outlet, consult an

electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched

particularly at plugs, convenience receptacles, and the point

where they exit from the apparatus.

11. Only use attachments/accessories specified by the

manufacturer.

12. Use only with a cart, stand, tripod, bracket, or other unit

specified by the manufacturer, or sold with the apparatus.

When a cart is used, use caution when moving the cart/

apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused

for long periods of time.

14. Refer all servicing to qualified service

personnel. Servicing is required when

the apparatus has been damaged in

anyway, such as power-supply cord

or plug is damaged, liquid has been

spilled or objects have fallen into the

apparatus, the apparatus has been

exposed to rain or moisture, does

not operate normally, or has been

dropped.

IMPORTANT SAFETY INFORMATION

Quick Start Guide | Terra Nova Amplifiers & Combos

WARNING - To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus shall not

be exposed to dripping or splashing objects. Objects filled with liquids, such as beer glasses, shall not be placed on the apparatus.

WARNING - The mains plug / appliance coupler is used as a disconnect device, the disconnect device shall remain readily

operable.

WARNING - Protective earthing terminal. The apparatus should be connected to a mains socket outlet with a protective

earthing connection.

Avertissement: pour réduire le risque d’incendie ou choc électrique, ne pas exposer cet appareil sous la pluie et l’humidité.

La prise du secteur est utilisé pour déconnecter le système.

La prise du secteur ne doit pas être obstruée ou doit etre facilement accessible pendant son utilisation pour être complètement

déconnecté de l’alimentation d’entrée la prise doit être débranchée du secteur.

4Quick Start Guide | Terra Nova Amplifiers & Combos

ENGLISH:

5. Introduction 6. Before You Plug In 7. CAUTION! 8. Unit Diagram - Front Panel 10. Unit Diagram - Back Panel

12. Product Support

FRANCAIS:

13. Bienvenue chez EDEN 14. Avant de vous brancher 15. ATTENTION! 16. Diagramme - Face Avant

18. Diagramme – Face Arrière 20. Assistance produit

DEUTSCHE:

21. Einleitung 22. Vor dem Einschalten 23. WARNUNG! 24. Produktdarstellungen – Vorderseite

26. Produktdarstellungen - Rückseite 28. Produkt Support

ESPAÑOL:

29. Introducción 30. Antes De Conectar Su Equipo 31. ¡Atencion! 32. Controles Del Panel Frontal

34. Controles Del Panel Posterior 36. Soporte De Producto

ITALIANO:

37. Bienvenido a EDEN 38. Prima di collegare 39. ATTENZIONE! 40. Schema dell’Unità – Pannello Frontale

42. Schema dell’Unità – Pannello Posteriore 44. Assistenza Prodotti

日本語:

45. はじめに 46. 楽器を接続する前に 47. 使用上の注意 48. フロントパネル機能 50. リアパネル機能

52. 保証・お問い合わせなど

中文:

53. 介绍 54. 在你插上乐器之前 55. 警告！ 56. 设备图示　－　前面板 58. 设备图示　－　背板

60. 产品支持

Introduction

Quick Start Guide | Terra Nova Amplifiers & Combos

For over 40 years EDEN has been designing and manufacturing bass equipment for the discerning bass player.

Our mission has always been to offer the best possible equipment with the most useable features while continuing to develop new

technology.

At EDEN we like to look at bass a little differently from everyone else, so instead of asking what is it about our amplifiers that

people love, we ask what could we do to make our amplifiers more fun, more intuitive and more flexible, but retain the famous

EDEN tone. Working alongside musicians, touring techs, and some very influential producers EDEN has sought to find out how

and why people use the equipment they use and combine all of the elements people really want in a professional product.

The TerraNova range from EDEN offers a new and exciting range of amplification, combining traditional tested tone creation with

new manufacturing technologies to provide an amplifier solution for every style of player. We hope you enjoy your new amplifier

as much as we have enjoyed designing it.

For best results, pair with your TerraNova amplifier with the TerraNova cabinet range to maximize your response and get the

optimal sound from your rig. Alternatively why not try one of our D-Series cabinets with adjustable tweeter control for exceptional

tone definition. TerraNova Combos boast all of the same features as TerraNova heads with the benefit of an integrated speaker

cabinet, tuned and ported for optimum output.

6Quick Start Guide | Terra Nova Amplifiers & Combos

Before You Plug In

Before you plug in or use your amplifier please ensure you know how to correctly operate your unit. Incorrect operation or

installation may lead to undesirable results or unit failure which can be avoided by reading this guide.

Your amplifier or combo has been designed to ensure that it performs time and time again with consistent tone. In order to ensure

your amplifier provides years of service it is important that you protect the amplifier from overheating. In order to do this you

should follow a few simple rules that will help protect your investment.

1. Do not block Vents or disable Ventilation systems. Your amplifier has been designed with a ventilation system that allows air

to circulate over internal components inside the amplifier. in some cases (depending on the model) your amplifier may also

be fitted with a fan to provide additional cooling. Vent holes and fans are designed to ensure your amplifier can perform to its

maximum capacity for the longest time. Blocking and vent holes or disabling any fans that may be fitted will not only void your

warranty, but will almost certainly reduce the life of your amplifier.

2. Correct Loading: In order to get the most power and performance from your amplifier you should use a 4 Ohm load with

your amplifier. EDEN combos are pre loaded with 4 Ohm speaker solutions so you will get the maximum power right out of

the box. When choosing Speakers for EDEN TerraNova heads you should think about what impedance rig your will use. 2x

8 Ohm cabinets will provide a 4 Ohm rig, but if you are only using a single cabinet your are best to opt for a 4 Ohm single

cabinet.

Remember using a load below 4 Ohms will cause stress on the amplifier, so always make sure your minimum total load never drops

below 4 Ohms.

If you are unsure about any about rig impedances or anything else to do with your amplifier speak to the store where you bought it

from, they will be more than happy to provide you with advice.

Caution!

Quick Start Guide | Terra Nova Amplifiers & Combos

The equipment you have purchased has been developed to provide you with a tool to achieve great tone and in some cases deliver

levels of volume that may be unsuitable for use in confined spaces or without hearing protection.

Every piece of EDEN equipment is designed to perform exceptionally and just as with other high performance products can in

certain situations be capable of operating at levels that may be outside of the requirements or capability of the user.

Use this equipment safely and considerately, the volume control on higher Wattage amplifiers is your responsibility. Your ears and

those of others who are fortunate enough to hear you play are your most important instruments required to enjoy your music.

If you experience any hearing loss or discomfort when listening to any loud music or activity which involves excessive noise then for

your own sake speak with a medical professional. As a musician keeping your ears in good working order is as important as being

able to play your instrument, you only get one set of ears!

unit diagram - FRONT PANEL

8Quick Start Guide | Terra Nova Amplifiers & Combos

These features are the same across all TerraNova amplifier and combos.

1. Active Input: Plug your active or high output bass in here.

2. Passive Input: Plug your passive or low output bass here.

3. Mute LED: When the amplifier is muted this light will illuminate.

4. Mute Switch: Press this switch to mute and unmute the amplifier.

5. Compressor Light: This LED will illuminate when the compressor

feature is switched on.

6. Compressor Switch: Use this switch to turn the built in compressor

circuit off and on.

7. Input Gain: Use this control to adjust the amount of signal sent into

the preamp stage. Use in conjunction with the Input Gain clip light

to avoid clipping the input stage of the amplifier.

8. Input Gain Clip Light: When illuminated this LED shows clipping

is occurring in the preamp. To prevent this either turn down the

output of your instrument, or dial the Input Gain to a lower setting.

9. Enhance: Use this control to adjust the amount of Enhance added

to your EQ setting. This EQ sweep allows quick and effective

adjustment of your EQ with a single dial. For best results use the

Enhance control with all other EQ settings at 12 O’clock before

detailing your tone.

10. Enhance Light: When illuminated this LED indicates the

Enhance feature in the amplifier is turned on.

11. Bass: Adjust the low frequencies of the amplifier using this

control.

12. Bass Boost Switch: Use this switch to turn on the Bass boost

feature on the amplifier. When engaged the Bass control will

provide more pronounced Bass adjustment.

13. Bass Boost Light: when illuminated this LED indicated the Bass

boost feature is turned on.

14. Low Mid Freq Sweep: Adjust the frequency affected by the Low

Mid control from 30 Hz up to 300 Hz using this control.

15. Low Mid Control: Change the amount of frequency adjustment

by the low mid freq sweep using this dial.

16. Hi Mid Level Control: Adjust the frequency affected by the

upper mid freq sweep using this control.

unit diagram - Front panel (continued)

Quick Start Guide | Terra Nova Amplifiers & Combos

17. Hi Mid Freq Sweep: Adjust the frequency affected by the Hi Mid

control from 200 Hz up to 2000 Hz using this control.

18. Treble: adjust the highest frequencies on the amplifier using this

control

19. EQ clip light: When illuminated this LED indicates the EQ stage of

the amplifier is casing the amp to clip. To avoid clipping adjust the

frequency controls until the light remains off.

20. Master: Use this Control to adjust the overall output volume of

the amplifier.

21. Master Clip light: This LED will illuminate if anything causes

the power amp to clip. if the power amp is clipping adjust your

settings to prevent the light coming on.

22. Logo: Eden illuminated logo: this logo will illuminate when the

amplifier is switched on.

ACTIVE

PASSIVE

CLIP

MASTER

CLIP

EQ CLIP

ENHANCE

COMP

MUTE

HI MID

-15 +15

LOW MID

-15 +15

BASS

-15 +15

TREBLE

-15 +15

165

30 300

1.1K

200 2K

BOOST

INPUT

GAIN 11 15 16

14 17 18

2210

843

5 6

7 9

10 Quick Start Guide | Terra Nova Amplifiers & Combos

unit diagram - back panel

The overall layout on the rear of TerraNova head and combo units may vary, but the overall feature set remains the same.

Just remember that if you intend on using alternative cabinets with your combo amplifier you should first unplug the cable that connects the

internal 4 Ohm speaker, and always ensure the correct load is used with the amplifier.

1. Power Inlet: Plug your supplied power cord into your Eden amplifier using this mains inlet socket. Always ensure the power you are using is

the correct voltage as shown on the amplifier itself.

2. Power Switch: Turn the amplifier off and on using this switch.

Speaker Outputs: your amplifier or combo is fitted with 3 speaker output sockets. 2 of the sockets are 1/4” Jack sized and 1 is a Clear

Speakon type socket. Use either the single speakon (with a 4 Ohm cabinet for full power) or up to 2 sockets in combination. NEVER use all 3

sockets at the same time and always ensure your minimum total load for the entire rig is no less than 4 ohms. Your amplifier is also designed

to operate with no load, for either playing using headphones, using the amplifier in a studio, or as a preamplifier in a performance.

3. Speaker 1 out: Connect your unit to a speaker cabinet via a 1/4” Jack cable to this socket.

4. Speaker 2 out: Connect your unit to a speaker cabinet via a 1/4” Jack cable to this socket.

5. Speaker 3 out: Connect your unit to a speaker cabinet via a Speakon cable to this socket.

6. Headphone Out: Connect your headphones here using standard 3.5mm headphone cable.

7. MP3 / Line in: connect and external device using a 3.5mm jack cable here.

8. DI Ground Lift: Lift ground from your signal (when required) using this switch.

9. DI Pad: Pad the signal (reduce the output level) between line level and mic level using this switch.

Tabla de contenidos

Idiomas:

Otros manuales de Amplificador de Eden

Eden

Eden Navigator WP-100 Manual de usuario

Eden

Eden World Tour WT800C Manual de usuario

Eden

Eden METRO DC-210XLT Combo Manual de usuario

Eden

Eden EM25 METROMIX SERIES Manual de usuario

Eden

Eden WT-405 Time Traveler Manual de usuario

Eden

Eden EX410 Manual de usuario

Eden

Eden WTDI WORLD TOUR Manual de usuario

Eden

Eden E-UKE Manual de usuario

Eden

Eden EM15 METROMIX SERIES Manual de usuario

Eden

Eden Nemesis RS Series Combos Manual de usuario

Eden

Eden WTB-300 Manual de usuario

Eden

Eden EM15 METROMIX SERIES Manual de usuario

Eden

Eden E300 NEVER COMPROMISE Manual de usuario

Eden

Eden WTB1000 Manual de usuario

Eden

Eden WT-1000 Manual de usuario

Eden

Eden David line Valve-Tech series Manual de usuario

Eden

Eden ENX-260 Manual de usuario

Eden

Eden EC8 Manual de usuario

Eden

Eden Nemesis NA650 Manual de usuario

Eden

Eden World Tour Pro Series Manual de usuario

Eden

Eden Nemesis Silver Series NA120 Manual de usuario

Eden

Eden WTX-500 Manual de usuario

Eden

Eden WT-390 Time Traveler SIGNATURE SERIES Manual de usuario

Eden

Eden NEMESIS NC-200A Manual de usuario

Manuales populares de Amplificador de otras marcas

ASTRO

ASTRO HVO V40 P Manual de usuario

Marantz

Marantz SUPERSCOPE BLA-545 Instrucciones de montaje

NAD

NAD CI980 Manual de usuario

Technics

Technics SE-CH770 Manual de usuario

Harman Kardon

Harman Kardon HK6300 Manual de usuario

NAD

NAD T975 Manual de usuario

McIntosh

McIntosh MA6850 Manual de usuario

Electro-Harmonix

Electro-Harmonix ENGLISH MUFF’N Manual de usuario

Viatron

Viatron Autrix Manual de usuario

GME

GME GA9800 Manual de usuario

Atlas

Atlas CP700 Manual de usuario

Roland

Roland KC-1000 Manual de usuario

Pyle

Pyle PFMRA350BW Manual de usuario

Advantage

Advantage S-250 Manual de usuario

IRT Electronics

IRT Electronics DVA-3007 Manual de usuario

Dimavery

Dimavery BA-100 Series Manual de usuario

Sony

Sony XM-S400D Manual de usuario

Schertler

Schertler ROY X Manual de usuario