Edelbrock 7798 Manual de usuario

Catalog #7798, 7799

Rev. 12/07 - AJ/mc

Brochure #63-0487

BIG BLOCK CHRYSLER VALLEY COVER PLATES

For B and RB Chrysler Engine Blocks

Catalog #7798 & 7799

INSTALLATION INSTRUCTIONS

PLEASE study these instructions carefully before beginning this installation. Most installations can be accomplished with

common tools and procedures. However, you should be familiar with and comfortable working on your vehicle. If you do

not feel comfortable performing this installation, it is recommended to have the installation completed by a qualified

mechanic. If you have any questions, please call our Technical Hotline at: 1-800-416-8628, 7:00 am - 5:00 pm, Pacific

Standard Time, Monday through Friday or e-mail us at [email protected].

IMPORTANT NOTE: Proper installation is the responsibility of the installer.

Improper installation may result in poor performance and engine or vehicle damage.

DESCRIPTION: These steel Valley Cover Plates are designed to cover the lifter valley of Chrysler big block V8 engines

when Edelbrock Victor Big Block Chrysler cylinder heads #77919 or 77929 are used. A stock sheet-metal valley cover

may not be used with Edelbrock Victor cylinder heads. Part #7798 fits Chyrsler RB (413-426 Wedge-440) engine blocks

and #7799 fits Chrysler B (361-383-400) engines.

KIT CONTENTS:

❑1 Valley Cover Plate

❑14 1/4-20 x 1/2” bolts

INSTALLATION PROCEDURE

(NOTE: Install the valley cover only AFTER your Edelbrock cylinder heads have been installed.)

Edelbrock Corporation • 2700 California St. • Torrance, CA 90503

Tech Line: 1-800-416-8628

E-Mail: [email protected]

1. Be sure that the mating surfaces of the block and the surface of the cylinder heads that will meet the valley

cover are thoroughly clean and free of any oils or debris before installation. Use alcohol or lacquer thinner

on a lint-free rag to clean.

2. Apply a continuous, 1/8” bead of automotive RTV silicone sealer to the end sealing surfaces on block and

along bottom of intake flange on the cylinder head where it will meet the valley cover.

3. Pay special attention to the corners of the cylinder heads where they meet the end seal surfaces (Use a

bit more silicone here).

4. Position the valley cover in place on the engine and install the supplied bolts.

5. Tighten bolts to 10-12 ft./lbs., starting in the center and working your way to the ends.

6. Place the intake manifold in position and torque manifold bolts to 25 ft. lbs., following the factory torque

sequence.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Pieza de automóvil de Edelbrock

Edelbrock

Edelbrock 68642 Manual de usuario

Edelbrock

Edelbrock 63-65903 Manual de usuario

Edelbrock

Edelbrock 65912 (Ceramic-Coated) Manual de usuario

Edelbrock

Edelbrock Torker-Plus 265-400 Manual de usuario

Edelbrock

Edelbrock 2934 Manual de usuario

Edelbrock

Edelbrock 10220275 Manual de usuario

Edelbrock

Edelbrock 2810 Manual de usuario

Edelbrock

Edelbrock 90 V6 200 Manual de usuario

Edelbrock

Edelbrock 6661 Manual de usuario

Edelbrock

Edelbrock 5272 Manual de usuario

Edelbrock

Edelbrock 70206 Manual de usuario

Edelbrock

Edelbrock 68832 (Ceramic-Coated) Manual de usuario

Edelbrock

Edelbrock 70028 Manual de usuario

Edelbrock

Edelbrock 72279 Manual de usuario

Edelbrock

Edelbrock 71922 Manual de usuario

Edelbrock

Edelbrock Russell 651105 Manual de usuario

Edelbrock

Edelbrock 6510 Manual de usuario

Edelbrock

Edelbrock 7788 Manual de usuario

Edelbrock

Edelbrock 5758 Manual de usuario

Edelbrock

Edelbrock 2121 Manual de usuario

Edelbrock

Edelbrock 5778 Manual de usuario

Edelbrock

Edelbrock 5210 Manual de usuario

Edelbrock

Edelbrock Russell R09430 Manual de usuario

Edelbrock

Edelbrock 4742 Manual de usuario

Manuales populares de Pieza de automóvil de otras marcas

Dakota Digital

Dakota Digital 650277 Manual de usuario

bosal

bosal 037031 Manual de usuario

Vintage Air

Vintage Air 571063 Manual de usuario

GFB

GFB EX38 Manual de usuario

bosal

bosal 028091 Manual de usuario

Dodge

Dodge 8W-43 Guía de inicio rápido

ICI

ICI Magnum FBM10DGN Manual de usuario

Volant Perfomance

Volant Perfomance 19435 Manual de usuario

BENDIX

BENDIX GEN 4 GEN 5 ABS Manual de usuario

Vintage Air

Vintage Air 571065 Manual de usuario

Rugged Ridge

Rugged Ridge 11503.13 Manual de usuario

BENDIX

BENDIX CYCLONE DURADRAIN TRAILER WATER Manual de usuario

Porsche

Porsche 968 - ASSEMBLY INSPECTION PROCEDURE AND MAINTENANCE... Guía

Sumitomo

Sumitomo FINE CYCLO FC-A 15 G Manual de usuario

Toshiba

Toshiba 48-1250 A Manual de usuario

aldes

aldes EHT2 Manual de usuario

Go Rhino

Go Rhino 24371T Manual de usuario

BBK

BBK 18950 Manual de usuario