Edelbrock 68452 Manual de usuario

Rev. 5/06 - DA/mc Catalog #68452, #68453

Brochure #63-68452

Page 1 of 2

SHORTY HEADER

for 1986-1993 Ford Mustang, Capri, Mark,

5.0L (302 V8) with E.F.I., Auto & Standard Transmission

Catalog #68452, #68453

INSTALLATION INSTRUCTIONS

PLEASE study these instructions carefully before installing your new Shorty Header. If you have any questions, please call

our Technical Hotline at: 1-800-416-8628 from 7:00 am - 5:00 pm, Monday-Friday, Pacific Standard Time or e-mail

us at [email protected]. Please fill out and mail your warranty card.

HEADERS: These components are designed to improve the exhaust efficiency of the Ford 5.0 Litre V8 engine with E.F.I.

(Electronic Fuel Injection). These tubular manifolds are a direct replacement for the factory exhaust manifolds. A

performance gain can be expected by the installation of this system. This system does not require welding for installation

and retains all O.E.M. emissions equipment.

SUGGESTED TOOLS FOR INSTALLATION:

❑3/8" ratchet socket set with extensions and sockets ❑Jackstands, screwdrivers, pliers, crescent wrench, etc.

❑Combination set of open-end wrenches ❑Liquid penetrant, anti-seize compound

SPECIAL NOTICE: This Edelbrock part has received an Executive Order (E.O. #) from the California Air Resources Board

(C.A.R.B.) making it legal for street use on pollution-controlled motor vehicles in all 50 states. To assist you with emissions

equipment certification, we have included a silver fan shroud decal to help testing personnel verify that this part is a legal

replacement part on the vehicle for which it is cataloged. The adhesive-backed decal should be affixed to your fan shroud

next to the existing emission and engine specification decal. Do not cover your original equipment specification decal with

the Edelbrock fan shroud decal.

WARNING: The use of "Thermal Wrap" or any aftermarket coating process will void the warranty on your

headers. Those products can cause excessive heat and moisture buildup resulting in corrosion and early

failure of the system.

NOTE: High temperature spark plug wires and boots are recommended to withstand heat from Headers.

IMPORTANT NOTE:

Proper installation is the responsibility of the installer. Improper installation will void warranty and may

result in poor performance and engine or vehicle damage.

Rev. 5/06 - DA/mc Catalog #68452, #68453

Brochure #63-68452

Page 2 of 2

Edelbrock Corporation, 2700 California St., Torrance, CA 90503

Tech Line: (800) 416-8628

Office: (310) 781-2222

E-Mail: [email protected]

• DISASSEMBLY

1. Disconnect negative cable from battery.

2. Use penetrating oil on all nuts and bolts to be

removed. This will prevent the possibility of

broken or stripped nuts and bolts.

3. Unbolt exhaust pipes from both exhaust

manifolds.

4. Unbolt and remove both exhaust manifolds.

5. Clean and inspect all sealing surfaces before

assembly.

• ASSEMBLY - LEFT SIDE

1. With manifold port gasket in place, start a

header bolt with lock and flat washer in the

rearmost bolt hole leaving enough room for the

manifold to slip into position.

2. Start balance of header bolts with lock washers

and tighten evenly.

• ASSEMBLY - RIGHT SIDE

1. With gasket in place, start all bolts except the

rear bolt with lock and flat washers on each.

2. Start rear bolt with A.I.R. tube support bracket in

place.

3. Tighten balance of header bolts evenly.

4. Re-attach exhaust pipes to TES manifolds using

your original nuts.

5. Connect all parts including battery.

6. Start engine and bring up to normal running

temperature, then turn off and let cool.

7. When cool, re-tighten all manifold nuts and bolts.

INSTALLATION INSTRUCTIONS

HARDWARE SUPPLIED

Catalog #68452 (Ceramic-Coated), #68453 (Ti-Tech Coated)

Qty.Description Qty.Description

❑1 #25-9269 Header left side (#68452) ❑16 Header bolts; 3/8”-16 x 1”

❑1 #25-9272 Header right side (#68452) ❑16 Lockwashers; 3/8”

❑1 #25-9036 Header left side (#68453)

❑1 A.I.R. tube support bracket

❑1 #25-9035 Header right side (#68453)

❑1 Hex nut; 1/4” - 20

❑2 Manifold port gaskets ❑1 Lockwasher; 1/4”

❑4 Flat washers; 3/8” ❑1 Hex cap screw; 1/4”-20 x 3/4”

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Pieza de automóvil de Edelbrock

Edelbrock

Edelbrock 5652 Manual de usuario

Edelbrock

Edelbrock 1481 Manual de usuario

Edelbrock

Edelbrock 15002 Manual de usuario

Edelbrock

Edelbrock 66722 Manual de usuario

Edelbrock

Edelbrock 5766 Manual de usuario

Edelbrock

Edelbrock 15005 Manual de usuario

Edelbrock

Edelbrock 5280 Manual de usuario

Edelbrock

Edelbrock 6606 Manual de usuario

Edelbrock

Edelbrock 2 & 4 W/D Manual de usuario

Edelbrock

Edelbrock 65232 Manual de usuario

Edelbrock

Edelbrock Performer Multipoint 3501 Documento técnico

Edelbrock

Edelbrock 63-0144 Manual de usuario

Edelbrock

Edelbrock 4250 Manual de usuario

Edelbrock

Edelbrock 3821 Manual de usuario

Edelbrock

Edelbrock 77509 Manual de usuario

Edelbrock

Edelbrock 1551 Manual de usuario

Edelbrock

Edelbrock 61409 Manual de usuario

Edelbrock

Edelbrock 72000 Manual de usuario

Edelbrock

Edelbrock 3581 Manual de usuario

Edelbrock

Edelbrock 5672 Manual de usuario

Edelbrock

Edelbrock 3530 Manual de usuario

Edelbrock

Edelbrock 70404 Manual de usuario

Edelbrock

Edelbrock 66642 Manual de usuario

Edelbrock

Edelbrock 70207 Manual de usuario

Manuales populares de Pieza de automóvil de otras marcas

Dakota Digital

Dakota Digital 650277 Manual de usuario

bosal

bosal 037031 Manual de usuario

Vintage Air

Vintage Air 571063 Manual de usuario

GFB

GFB EX38 Manual de usuario

bosal

bosal 028091 Manual de usuario

Dodge

Dodge 8W-43 Guía de inicio rápido

ICI

ICI Magnum FBM10DGN Manual de usuario

Volant Perfomance

Volant Perfomance 19435 Manual de usuario

BENDIX

BENDIX GEN 4 GEN 5 ABS Manual de usuario

Vintage Air

Vintage Air 571065 Manual de usuario

Rugged Ridge

Rugged Ridge 11503.13 Manual de usuario

BENDIX

BENDIX CYCLONE DURADRAIN TRAILER WATER Manual de usuario

Porsche

Porsche 968 - ASSEMBLY INSPECTION PROCEDURE AND MAINTENANCE... Guía

Sumitomo

Sumitomo FINE CYCLO FC-A 15 G Manual de usuario

Toshiba

Toshiba 48-1250 A Manual de usuario

aldes

aldes EHT2 Manual de usuario

Go Rhino

Go Rhino 24371T Manual de usuario

BBK

BBK 18950 Manual de usuario