Edelbrock 67452 Manual de usuario

Catalog #67452, #67453

Brochure #63-67452

Rev. 5/06 - DA/mc

SHORTY HEADER

For 1994-1995 Ford Mustang, Capri, Mark,

5.0L (302 V8) with E.F.I., Auto/Std. Transmission

Catalog #67452, #67453

INSTALLATION INSTRUCTION

Please study these instructions carefully before installing your new

Shorty Header

. If you have any questions, please

contact our Technical Hotline at : 1-800-416-8628 from 7 am - 5pm, Monday-Friday, Pacific Standard Time or e-mail

us at [email protected]. Please fill out and mail your warranty card.

SHORTY HEADER: These components are designed as a system to improve the exhaust efficiency of the Ford 5.0 liter

V8 engine with E.F.I. (Electronic Fuel Injection). These tubular manifolds are a direct replacement for the factory exhaust

manifolds. A performance gain can be expected by the installation of the system. This system requires no welding

for installation and retains all O.E.M. emissions equipment.

Suggested Tools Needed for Installation: This vehicle has some metric fasteners.

❑ 3/8” ratchet socket set with extensions and sockets

❑Combination set of open-end wrenches

❑ Jackstands, screwdrivers, pliers, crescent wrench, etc.

❑ Liquid penetrant, anti-seize compound

SPECIAL NOTICE: This Edelbrock Shorty Header has received an Executive Order number (E.O.#) from the California Air

Resources Board (C.A.R.B.) making it legal for street use in all 50 states. To assist you with emission equipment

certification, we have included a silver fan shroud decal to help testing personnel verify the this part is a legal replacement

on the vehicle for which it is cataloged. The adhesive-backed decal should be affixed next to the existing emission and

engine specifications decal. Do not cover any part of your original emission decal.

WARNING: The use of "Thermal Wrap" or any aftermarket coating process will void the warranty on your Edelbrock

Shorty Header. Those products can cause excessive heat and moisture buildup resulting in corrosion and failure of the

system.

CAUTION: Due to higher underhood temperatures generated by shorty header, vehicles equipped with original spark plug

wires should have them replaced with high temperature plug wires for longer life.

IMPORTANT NOTE:

Proper installation is the responsibility of the installer. Improper installation will void warranty and may

result in poor performance and engine or vehicle damage.

Catalog #67452, #67453

Brochure #63-67452

Rev. 5/06 - DA/mc

Disassembly

1. Disconnect negative cable from battery.

2. Use penetrating oil on all nuts and bolts to be

removed. This will prevent the possibility of broken or

stripped nuts and bolts.

3. Unbolt exhaust pipes from both exhaust manifolds.

4. Remove EGR tube from right side.

5. Unbolt and remove both exhaust manifolds.

6. Clean and inspect all sealing surfaces before

assembly.

Assembly - Left Side

1. With manifold port gasket in place, start a header bolt

with lock and flat washer in the rearmost bolt hole

leaving enough room for the manifold to slip into

position.

2. Start balance of header bolts with lock washers and

tighten evenly.

INSTALLATION INSTRUCTIONS

Edelbrock Corporation

2700 California St.

Torrance, CA 90503

Tech Line: 1-800-416-8628

E-Mail: [email protected]

KIT CONTENTS

Catalog #67452 (Ceramic-Coated), #67453 (Ti-Tech Coated)

Qty.Description Qty.Description

❑1 Manifold left side #25-9269 (#67452) ❑2 Coupler band clamps

❑1 Manifold right side #25-9270 (#67452) ❑2 Manifold port gaskets

❑ 1 Manifold left side #25-9036 (#67453)

❑2 Connector gaskets

❑ 1 Manifold right side #25-9141 (#67453)

❑ 12 Lock nuts, cad-plated; 3/8”-16

❑1 Manifold left side (B section) #25-9103 ❑ 14 Socket head cap screws; 3/8”-16 x 1/4”

❑1 Manifold right side (B section) #25-9104 ❑4 Tie wraps; 11”

❑1 Cat. adapter left (3”) #25-9622 ❑ 20 Split lock washers; 5/16”

❑1 Cat. adapter right (3”) #25-9623 ❑6 Hardened washers; 5/16” i.d. x 3/4” o.d.

❑ 20 Header bolts; 5/16”-18 x 1”

Assembly - Right Side

1. With gasket in place, start all bolts except the rear bolt

with lock and flat washers on each.

2. Start rear bolt with A.I.R. tube support bracket in

place.

3. Tighten balance of header bolts evenly.

4. Re-attach exhaust pipes to TES manifolds using your

original nuts.

5. Reinstall EGR tube.

6. Connect all parts including battery.

7. Start engine and bring up to normal running

temperature, then turn off and let cool.

8. When cool, re-tighten all manifold nuts and bolts.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Pieza de automóvil de Edelbrock

Edelbrock

Edelbrock Russell 694540 Manual de usuario

Edelbrock

Edelbrock 66792 Manual de usuario

Edelbrock

Edelbrock 5683 Manual de usuario

Edelbrock

Edelbrock 66693 Manual de usuario

Edelbrock

Edelbrock 3867 Manual de usuario

Edelbrock

Edelbrock 6500 Manual de usuario

Edelbrock

Edelbrock 17935 Manual de usuario

Edelbrock

Edelbrock 5711 Manual de usuario

Edelbrock

Edelbrock Chevrolet 5783 Manual de usuario

Edelbrock

Edelbrock 10220275 Manual de usuario

Edelbrock

Edelbrock 4737 Manual de usuario

Edelbrock

Edelbrock 6502 Manual de usuario

Edelbrock

Edelbrock 4700 Manual de usuario

Edelbrock

Edelbrock 65912 (Ceramic-Coated) Manual de usuario

Edelbrock

Edelbrock Russell 641530 Manual de usuario

Edelbrock

Edelbrock 5724 Manual de usuario

Edelbrock

Edelbrock 2925 Manual de usuario

Edelbrock

Edelbrock 5721 Manual de usuario

Edelbrock

Edelbrock 28385 Manual de usuario

Edelbrock

Edelbrock Performer 70060 Manual técnico

Edelbrock

Edelbrock 396-502 Manual de usuario

Edelbrock

Edelbrock 5602 Manual de usuario

Edelbrock

Edelbrock Performer 1403 Manual de usuario

Edelbrock

Edelbrock 1803 Manual de usuario

Manuales populares de Pieza de automóvil de otras marcas

Dakota Digital

Dakota Digital 650277 Manual de usuario

bosal

bosal 037031 Manual de usuario

Vintage Air

Vintage Air 571063 Manual de usuario

GFB

GFB EX38 Manual de usuario

bosal

bosal 028091 Manual de usuario

Dodge

Dodge 8W-43 Guía de inicio rápido

ICI

ICI Magnum FBM10DGN Manual de usuario

Volant Perfomance

Volant Perfomance 19435 Manual de usuario

BENDIX

BENDIX GEN 4 GEN 5 ABS Manual de usuario

Vintage Air

Vintage Air 571065 Manual de usuario

Rugged Ridge

Rugged Ridge 11503.13 Manual de usuario

BENDIX

BENDIX CYCLONE DURADRAIN TRAILER WATER Manual de usuario

Porsche

Porsche 968 - ASSEMBLY INSPECTION PROCEDURE AND MAINTENANCE... Guía

Sumitomo

Sumitomo FINE CYCLO FC-A 15 G Manual de usuario

Toshiba

Toshiba 48-1250 A Manual de usuario

aldes

aldes EHT2 Manual de usuario

Go Rhino

Go Rhino 24371T Manual de usuario

BBK

BBK 18950 Manual de usuario